Question about 1996 Mercury Sable

1 Answer

Cannt find the thermostats goes - 1996 Mercury Sable

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

You're going to lose some coolant, so have a bucket or other container ready. Follow the upper radiator hose to the point where it's connected to the engine. The hose is clamped to a metal housing which is bolted to the engine. Remove the bolts (not the hose) and lift the housing to expose the thermostat (may require a little prying with a screwdriver or similar tool). Note how the old thermostat is fitted (which end is up), lift it out of the engine, and then remove all traces of gasket from the housing and the engine. Install the new thermostat and gasket, replace the bolts, add coolant as necessary, and you're done.

Posted on Jan 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Audi A6 temp goes to 120 overheats then down to 90 and oil symbols comes also


I would check the thermostat first. Remove the thermostat and place it in a pan of water on the stove. Place a thermometer in the water with the thermostat and slowly increase the temperature until you have reached 194 degrees Fahrenheit or 90 degrees Celsius. Watch closely for the thermostat to open slightly. If it opens then the thermostat is good. If it does not open, replace it. Try that first and see what you come up with.

Aug 13, 2014 | 2003 Audi A6

2 Answers

Where is the thermostat?


Top radiator hose, one end goes to the radiator, the other end goes to the thermostat housing at the top front of the engine, three bolts to undo to remove the housing and access the thermostat. If you remove the radiator cap and suck out the coolant from the top of the core then none will be spilled when the thermostat housing is removed.

Jan 26, 2013 | 1999 Nissan Terrano

1 Answer

Serpentine belt broke and cannt figure out how it goes back on


there should be a belt tensioner you can loosen off. loosen it, feed your belt through then tighten up the tensioner. note - get a diagram off how to feed your belt through all the wheels.

Jan 09, 2013 | 1998 Oldsmobile Regency

1 Answer

Nissan cooling sys.


The flow goes like this, the coolant in the engine is flowing through thermostat to top off radiator then flows down radiator and is cooled by the fan, so when thermostat opens coolant goes into engine from the bottom and the coolant from the engine goes into radiator at the top.

Oct 06, 2012 | Cars & Trucks

2 Answers

LMy 93 Cutlass has the 3.1L V-6. I need to replace the thermostat. Which way is the thermostat supposed to go? Spring side down, or up?


Good Evening, on your thermostat the spring goes towards the motor which is away from the hose. Hope this helps.

Oct 01, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

Thermostat is sticking


Your thermostat is inside of a housing unit. You follow your radiator to the tube that goes out the top of your radiator. That tube goes to your thermostat housing unit where your thermostat is located.

Dec 02, 2008 | 2000 Saab 9-3 Viggen

1 Answer

Thermostat install for 1989 Maxima


it goes inside of the housing unit. but when you put the housing unit on, the stem should be pointing to the engine

Dec 02, 2008 | 1989 Nissan Maxima

2 Answers

Need picture of jeep thermostat


sorry, thermostat and housing are on bottom radiator hose on 03 jeep liberty with a v6

Nov 21, 2008 | 2003 Jeep Liberty

2 Answers

Cannt remove cyclinder head


There is (10) Ten head bolts located between each valve spring. They are torqued between 110/135 ft lbs the head may require some minor prying between the bottom of the head and the top of the block.

Nov 14, 2008 | 1993 Ford F350

Not finding what you are looking for?
1996 Mercury Sable Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...