Question about 2001 Ford Focus

2 Answers

Hi ive got a ford mondeo 2001 2.0i now ive been told its the ecu faulty! can i just get another one and fit it? or do i have to have it programed to my car???? thanks for looking

Posted by on

  • dean mcadam
    dean mcadam Sep 23, 2009

    many thanks :)

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

You can get another one that is exactly the same here but once fitted you may need to use a diagnostic tool to help it.The main reason here is that ECU is like the heart of the car as example and once you fit it there may be some other problem that may come up.For example it may read an error code somewhere and sets the engine into safety mode..so once you change it you may need a diagnostic tool handy in order to reset the error.Here it acts as you are refreshing its brain and make it think it has a new body!!Hope this helps and for any question please do ask.

Posted on Sep 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi

Thanks for using FixYa. ECU's for Ford Mondeo are available. However, the ECU's can't be replaced by you as it require programming, the ECU is coded to work only with your vehicle only. And to make it work it requires programming/reprogramming by an authorized Ford Dealer.
I hope you got the information you were looking for.
Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

Posted on Sep 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 2007 mondeo 2L dtci engine fit in a 2007 transit 2.2 tdci if I use the mondeo ecu ?


It will, but you need all the computers out of the transit. ECU,BCM,Radio,Security, ignition switch and key, then you need to make sure the wiring is the same...

Oct 23, 2015 | Cars & Trucks

1 Answer

Any one hi,i need the engine wireing diagram for the ford mondeo mk3 can anyone help me. even the ecu pin dia will help


Find shop that has Mitchell On Demand--They can print it out for you. There may be a charge involved.

Dec 08, 2014 | Ford Cars & Trucks

1 Answer

Mondeo tdci turns over but wont start


my ford mondeo zetct turns over but wont fire sparks are fine petrol fine leads are fine new battery new coil what next ecu checked cam sencor checked

Apr 04, 2012 | 2003 Ford Mondeo

1 Answer

My holden barina 1999 model want start Ive been told the inigtion sensor has gone im wondering how much it cost to repair Ive been told two and a half grand


if you mean the crank sensor then their are about 50 euros tops ,but if the ECU is faulty then yes they are expensive so you get one from a scrap yard with the transponder module and the chip from the donor car key

May 02, 2011 | Honda Accord Cars & Trucks

1 Answer

How do i reset my 2001 ford mondeo car key after replacing the battery?


Programming
When
Key(s) added or replaced. System malfunction.
How
Obtain all keys fitted with remote control. Turn ignition switch from position 0 to position II 4 times within 6 seconds. Turn ignition switch to position 0. The system will emit an acoustic signal to indicate start of programming mode. Programming mode activated for 10 seconds proceed as follows: Press and hold lock, unlock or boot release button Fig. 1 [1], [2] or [3]. Wait for acoustic signal (indicates correct programming). Repeat above procedure within 10 seconds to program remaining keys. To exit programming mode: Turn ignition switch to position III or wait 10 seconds. Keys can also be programmed using diagnostic equipment.
NOTE: A maximum of 4 keys can be programmed

Mar 31, 2010 | 2002 Jaguar S-Type

1 Answer

Ive got a focus 1.6 petrol the engine managment comes on hooked it up to computer and it says the cam shaft position sensor is it a common fault and will it probley be the sensor faulty?


Hi Smith,

This is a very common fault with most new fords. I have had to replace mine in a Mondeo MK3 ST and its only done 35000 miles. Very easy to fit as well i just searched on google and found some picks on how to fit and costs less than £20.

Cheers,

Toon.

Sep 26, 2009 | 2004 Ford Focus

2 Answers

Hi,i really hope someone can help?? ive got a 2001 ford mondeo 2.0i,......now ive got a misfire on 1 and 3.....now ive put a new coil pack on with new leads and spark plugs and its still the same....ive...


The problem could be in the injection control module. This can be checked by what they call a noid light that can be purchased at a parts house, plug it into the injector pigtail start the car and see if the noid light comes on when it is supposed to fire on that injector if does not then the control module is going bad.

Sep 17, 2009 | 2001 Ford Focus

1 Answer

Will a 2003 mondeo tdci engine fit into a 2002 mondeo tdci


They should be. The SVT Models stay Very Consistent on the Motors.

Jan 21, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...