Question about 1995 GMC Jimmy

1 Answer

Need to replace hazard switch on 1995 gmc jimmy

The button does not depress for the hazards and the turn signals wont work. I can work it a little and sometimes they will come on. I think I need to replace the switch. Is it all one switch with the turn signal? How do I get the top access off the steering column.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 173 Answers

HELLO ' first remove the bottom cover off by removing mounting screws then look on the bottom their is more little screws to remove the top cover tilt your down to give you more room to remove cover , hope this helps.

Posted on Sep 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gmc turn signals


try removing the hazard switch this will allow turnsignal to work then see if the hazard switch was just stuck or needs replacing

Mar 30, 2014 | 2001 GMC Safari

1 Answer

1997 gmc jimmy turn signals dont work


could need a new turn signal switch its happens on gm

Dec 02, 2012 | 1997 GMC Jimmy

1 Answer

It sounds like my signal lights are on when thry aren't! the clicking is driving me nuts. 1999 GMC jimmy SLT. Please help


This may be an issue with the flasher relay or the multifunction/turnsignal switch which should also include the hazard switch.Try wiggling the turn signal switch and or the hazard flasher button when this occurs to see if it will stop.If it does the issue is most likely in the switch.

Jun 14, 2011 | GMC Jimmy Cars & Trucks

1 Answer

My hazard lights won't come on at all. The turn signals work fine, as long as the hazard button is not depressed. The hazards used to work, but if the hazard button was pressed and I put on a turn signal,...


sounds like a dirty switch, happens a lot in the UK as the switch is checked for the safety every year so the dirt in the switch causes open circuits, it is a complicated switch, it has many contacts that do different things when in and out, try a salvage yard

May 03, 2011 | 2001 Kia Rio

2 Answers

I have a1998 GMC Jimmy 4x4/ 4 door slt. The blinkers don't work on the front or back of the vehicle. No indication of the green arrows on the dash board our a relay tick either. Also my brake lights don't...


Try wiggling the turn signal switch and see if brake lights and or turn signals start working.Gm did have a recall on the multifunction switch on later models but it did affect earlier models as having the same problem. It's is possible that the multifunction switch is the cause of it all but is also possible that the flasher relay has gone bad but the relay wil only affect the turnsignal and hazrd flashers.

Apr 23, 2011 | 1998 GMC Jimmy

1 Answer

Suddenly, the signals do not work whatsoever. Yet the hazards do. It''s not the fuse. 1995 GMC Jimmy.


Replace the flasher, this truck uses two flasher one for the hazards and one for the signals, check and replace the flasher and go from there, good luck.

Jan 23, 2011 | 1995 GMC Jimmy

1 Answer

Brake light isnt working .. when lights are on brake lights come on ... when brakes are applied.. the light is not bright... nor does my back up light illuminate.. but turn signals do work


make sure that you have the correct bulbs installed and cleanup all the sockets with some WD-40. do your hazard lights work correctly? if not then check the fuse for the hazard/stop light. if its not the fuse then it probably means its a bad turn/hazard switch assembly.

May 14, 2010 | 1995 GMC Jimmy

1 Answer

95 gmc jimmie, 4x4, everytime i use my brake pedal, a fuse blows, i have no brake lights, hazard or signal lights. how do i fix it my mom broke off the hazard button in the steerin column so i used a stick...


consider properly repairing the hazard light switch via junkyard parts for a cheap price. You invariably have a short that overloads the fuse when you activate the brake lights via pressing on the brakes.

good luck

Mar 10, 2010 | 1995 GMC Jimmy

3 Answers

I have no turning signals on my 1995 jimmy. The fuse is good and the four way flashers work. If the flasher was bad wouldn't the little turning signal light still light up on the dash? I'm not sure where...


there should be a set of huge fuses located on the top of the firewall under your hood. Look for a burnt fuse there or look for an outside fuse panel located close to the fender wall under the hood. Some makes and models also wont allow the lights to work in the dash even if there is a blown signal bulb.

Mar 31, 2009 | 1995 GMC Jimmy

2 Answers

HAVE A 1995 BUICK REGAL WITH NO BRAKE LIGHT EVERYTHING WORK BUT NO BRAKE LIGHTS LIGHTSBULBS FUSES CHECK GOOD. HELP THANKS TOM


I had this same problem. I replaced the turn signal switch in the steering column and it worked great. To test for this, check your lights while wiggling your hazard light button and/or signal lever. When I pulled my hazard button forward, all my lights would come on.

Dec 12, 2008 | 1995 Buick Regal

Not finding what you are looking for?
1995 GMC Jimmy Logo

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...