Question about 1991 Honda Accord

1 Answer

I need a diagram of the front suspension and sway bars 91 honda

The suspension was changed and lowered by the first owner and the second owner put it back to the stock , but now it is like it is really loose and the front end makes a big raddle noise ,like the tires are shaking . its bad and i don't feel safe leting my wife and my kid drive or even ride in it .how do i fix it , or find a diagram of the front end online so i can see what is wrong ...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

If its noisy, something is bad wrong. lift it up and have one your kidsturn the steering wheel and look for anything loose. I would not have purchased any car that had been hacked like that. ck ball joints, ck for any loose bolts, ck everything you can see. dont drive it intil you find and repair what is wrong. without knowing what is wrong, i would say it coulld be dangerous.

Posted on Sep 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sway bar rubbing on tie rods


Usually suspension lifts utilize longer sway bar links or relocates the sway bar lower to accommodate the change in distance between lower control arms and the frame.

Mar 13, 2014 | 1988 Chevrolet K1500

1 Answer

Torsion Bars


No, your Honda does not have "torsion bars". You have a coil springs to absorb bumps and give the suspension compliance. A torsion bar was used on many Chrysler products and older vehicles. You may be confusing "torsion" bars with "sway" bars. A sway bar links suspension from side to side to keep the vehicle "flatter" in corners as an aid to handling.

Aug 24, 2013 | 1997 Honda Accord

1 Answer

What does the control arm on the front left driver side supposed to look like fully assembled


Hello! First diagram is the lower...Second is the upper..Guru...saailer

LOWER IDENTIFICATION:




Item
Part Number Description 1
5495 Stabilizer Bar Link Bolt and Bushing Assembly 2
18A192 Nut, Washer and Bushing Assembly 3
808264 Bolt 4
5005 Frame 5
5B326 Torsion Bar (LH) 6
5B327 Torsion Bar (RH) 7
620481 Nut 8
5C491 Nut and Washer 9
3079 Front Suspension Lower Arm (LH) 10
3078 Front Suspension Lower Arm (RH) 11
3A130 Tie Rod End 12
808166 Nut 13
808167 Nut 14
5K483 Front Stabilizer Bar Link 15
5482 Front Stabilizer Bar 16
5484 Front Stabilizer Bar Bushing 17
3B353 Front Stabilizer Retainer 18
N807396-S100 Bolt A
- Tighten to 40-55 Nm
(30-40 Lb-Ft) B
- Tighten to 150-200 Nm (111-148 Lb-Ft) C
- Tighten to 21-29 Nm
(15-21 Lb-Ft)


UPPER IDENTIFICATION:
Item Part Number Description 1 3C156 Damper Assembly (RH) 2 805348 Nut and Washer 3 - Shock Absorber Insulator
(Part of 18198) 4 3C157 Damper Assembly (LH) 5 3020 Front Suspension Bumper 6 3083 Front Suspension Upper Arm Assembly A - Tighten to 34-47 Nm
(25-35 Lb-Ft)



LOWER DIAGRAM FOLLOWED BY UPPER:

2_12_2012_9_47_51_pm.gif2_12_2012_9_54_26_pm.gif

Feb 12, 2012 | 1996 Ford Explorer

3 Answers

What are swey bars on a ford focus


A sway bar is a suspension piece that keeps the left and right side of vehicle connected to help with turns. They are held together through sway bar links at each end, which are fairly common to break or rattle over bumps.

Mar 27, 2011 | 2003 Ford Focus

2 Answers

I have a 2005 Trailblazer. I have had the stalilizer bar replaced, new ball joints, greesed the fittings on the ball joints. New calipers, rotos and branke pade. HOWEVER, I still have a clunking sound...


They are really bad for the lower control arm bushings causing a clunk noise. You can't see movement by checking on a hoist, but lubing them will help only temporarily. I did a lot of them under warranty, but being 2005 I'm sure yours has expired. I' would highly recommend changing them to eliminate the clunk noise.

Feb 01, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

How do i stop my 2002 GMC Safari from swaying


If this excessive swaying is due to worn suspension then those worn parts will be tie-rods, shock struts, anti roll bars and the rubber bushings holding the various parts of the suspension in place. General suspension overhaul would be required.
Now if its a normal feature of the vehicle you can improve the handling by fitting harder anti roll bars(sway bars), stiffer shocks, custom tie rods, better quality rubber bushes (polyurethane) and by lowering the suspension with shorter stiffer springs.
I suggest searching for an owners club for your vehicle where you should find some people who are doing the same thing and get advice from those who have been there before - --- You can ruin a cars handling and make it quite dangerous by changing things around, I suggest you search for suspension modification and do a quick 101 of the do's and dont's of suspension modification before you start swapping parts.

Jan 25, 2010 | 2002 GMC Safari

2 Answers

Stabilizer bar


Howdy, sway bar/stabilizer. disconnect neg battery cable, disable air bag (if equipped, it was an option in 91), jack up vehicle, support w/ safety stands, remove front wheels, disconnect sway bar ends from the lower control arms, remove bolts retaining sway bar bushing brackets.remove sway bar. Check bushings for splits and deformation, clean inner and outer surfaces of bushings before installation, Make sure bushings are properly seated in their brackets. Tighten brackets to 12 ft lbs, and end mounts or link bolts to 16 ft lbs. Let me know how u make out countrycurt0

Oct 02, 2008 | 1991 Honda Prelude

Not finding what you are looking for?
1991 Honda Accord Logo

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...