Question about 2001 Hyundai Accent

1 Answer

2001 hyundai accent clutch feels spongy and the

2001 hyundai accent clutch pedal feels spongy and the friction point is closer to the floor, after about 15-20 min driving it is difficult to switch gears.

Posted by on

  • carhob May 11, 2010

    did u check fluid level in clutch reservoir?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Seems to be a worn clutch... Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Hyundai accent. Everything feels fine but the release point on the clutch is very high.


Check to verify that the fluid level in your clutch cylinder is correct. With hydraulic clutches, there really is no "adjustment," but if the fluid level is low, the clutch plates won't move far enouth.

May 15, 2015 | 2003 Hyundai Accent

2 Answers

2008 hyundai accent clutch slipping, i think?


seems a bit early for clutch. how many k's? I would start by checking the intake tube for splits & security & airflow sensor. they will cause the engine to rev but no response (like a slipping clutch) so its manual right?

Oct 09, 2012 | 2008 Hyundai Accent

1 Answer

How do I determine if my clutch pedal ignition lock switch is bad on a 1996 Hyundai Accent?


YOUR CLUTCH START SWITCH.ENGINE SHOULD NOT START WHEN CLUTCH PEDAL RELEASED. YOUR ENGINE SHOULD START WHEN YOUR FOOT DEPRESSED CLUTCH PEDAL TO FLOOR..

Feb 23, 2011 | 1996 Hyundai Accent

3 Answers

1998 Hyundai Accent clutch pedal travel


dear friend-you can bleed the clutch.im am sure this will solve you problem

Jun 30, 2009 | Hyundai Motor 1998 Accent

1 Answer

To change gears, I need to fully press down on my clutch pedal to stop a grinding noise on my hyundai accent 2001Can I adjust the clutch cable,


Hi and welcome to FixYa,

In a manual 2001 Hyundai Accent, the clutch cable could be adjusted. The adjustment point is on the cable 'pad' where it enters the firewall in the engine compartment.
86c2d7d.jpg
To adjust, the slack or free play must be decreased. This is done by turning the adjusting nut clockwise. Check back by pressing on the clutch pedal to your preference.
73309c3.jpg
Good luck and thank you for using FixYa.

Feb 18, 2009 | Hyundai Motor 1995 Accent

1 Answer

Clutch pedal low near floor, can the clutch be adjusted?


hi the clutch on accent is hydraulic operation so if pedal is very low on disengaging clutch ? you may have a problem with the hydraulics 1st thing to check is fluid level? this is the reservoir that feeds both brakes and clutch but is seperaterated inside if fluid low? top up and bleed the slave cyl however if fluid low indicates a leak ? possibly slave cyl? if no loss of fluid ? then prob may be fault in the master cyl ? check fluid come back with any update please ps if this problem has just occured? check for leaks ?

Feb 02, 2009 | 2005 Hyundai Accent

2 Answers

Gear wont engage


it could be your clutch master or slave cylinder needing replaced. you need to have both checked

Jan 16, 2009 | 1997 Hyundai Accent

1 Answer

Clutch


Not positive about Hyundai,but most all import clutch systems that use hydraulics do have a clutch adjustment up under the dash.Get on the driver side floorboard with a light,lay on the floorboard looking UP...under the dash.Locate the clutch pedal,now track it UP to where you see a rod coming from the firewall back to the clutch pedal.This is the rod that actuates the clutch master cylinder.Track it back to the cutch pedal,and there should be threads on the end closest to the pedal.There should also be a jam nut,usually either 12mm or 14 mm.Loosen the jam nut,and back it off completely.Now adjust the rod in,towards the clutch pedal if you desire an engagement point higher on the clutch pedal travel.If you want the engagement point closer to the floorboards,adjust the rod out,towards the firewall.Good luck and rememeber to rate this solution.

Aug 31, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
2001 Hyundai Accent Logo

Related Topics:

810 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...