Question about 1987 Porsche 944

1 Answer

I got 1984 porsche started making noise after i replaced the timing betl the noise sounds like the timing belt too tite but is not.. what could be ?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 234 Answers

Spray a bit off wd40 on belt while runnning if belt will stop , and u can elimiate that could be tensioner ,

Posted on Sep 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1984 porsche 944 sometimes it starts, other time it just cranks. if it does not start, you go back later it will fire right up. replaced fuses, terminals ends, checked coil. it is a random situation and...


Sounds like a fuel filter problem, or fuel pump. Also have you ever had the injectors checked? I had the problem you've described and found both the fuel filter needed replaced, and the injectors cleaned and adjusted.

Apr 17, 2014 | 1984 Porsche 944

1 Answer

2002 Porsche Boxster - had squealing coming from


Mine did that off and on for a month with no other problems then it started making a loud suction noise and the check engine light came on. I took it to the dealer and they said the "oil separator" needed to be replaced.
After the repair I never heard the squealing again.

Apr 21, 2010 | 2002 Porsche Boxster

1 Answer

1984 928 began running very rough & lost all power. Shop indicates 0 compression on 4 cylinders and that likely cause is slipped timing belt and damage to valves on one side. I thought 1984 engine had...


depending upon the rpm that the engine was turning at, I have seen "non interference" engines bend valves on a timing belt or chain failure.
if you have 0 compression on that bank, it will need to be torn down to find out why. BUT I would do a cylinder leakdown on those cylinders after the belt has been removed (so you can turn the cam and close the valves for each of those cylinders), to make sure that they are not properly sealing, before removing the cylinder head.

Aug 30, 2009 | 1984 Porsche 928

1 Answer

Upon accelerating, there is a chirping sound coming from the belt area of the engine. I read that a common problem with this truck is the crankcase pulley bolt loosening and eventually falling off causing...


the chirping noise you hear are the belts being loose,adjust the tension on the belts,if the pulley bolt has not loosened up by now ,you dont have a bolt problem-when you have the timing belt replaced ,have the mechanic put some lock-tite on the bolt

Jul 01, 2009 | 1999 Mitsubishi Montero Sport

2 Answers

My 944 porsche just stopped while i was driving it??? it had been running great all day. It didn't make a sound just stopped running. It has a new battery. it won't start, the engine won't turn over. I...


have you tried jump starting it?does the starter engage and try to turn the engine over?it's possible your alternator is not working properly and your battery is in a discharged state,could this be the reason you replaced the battery?try turning the engine over by hand to make sure it rotates freely.

Apr 29, 2009 | 1984 Porsche 944

1 Answer

1984 Cadillac Deville Ddiesel


You need to pull the starter out and check the drive gear. If the drive gear is no good you will have to replace the starter. Make sure the cogs on the fly wheel are okay. If the fly wheel is damaged you will have to replace the fly wheel.

Apr 25, 2009 | 1984 Cadillac DeVille

1 Answer

84 Porsche 944,Stopped running while driving, will not turn over


check the timing belt. this auto is a valve bender.

Feb 15, 2009 | 1984 Porsche 944

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

896 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...