Question about 2009 Nissan Pathfinder

1 Answer

Passenger side dash speaker is loose is this warranty, car has 300 miles when you turn left or right something is slideing in the dash glove boxes are empty

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 355 Answers

Well its sound like it would be warranty for that new of car it should be

Posted on Sep 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing airbags


Remove the negative cable from your car battery before replacing car air bags. Not removing the negative cable could deploy the replacement air bag, causing injury. More car obd2 scanner to maintain car with cheap price.
Deactivate the air bag by removing the air bag fuses. Look in your car owners manual to locate the fuses.
Unscrew steering column paneling and remove the airbag bolts on the back side of the steering wheel. Pull out the airbag until you see the back side and unplug the wires.
Plug the new airbag into the wires and rebolt it back onto the steering wheel. Replace the car steering column panels.
Replace passenger side air bags through the glove box or main dash panels. Remove the glove box by taking off the glove box straps and undoing the hinges. Unplug and unbolt the airbag, slide it out the front of the dash, slide the new air bag in and rewire and rebolt it.
Put the glove box or dash panels back together. Reconnect the fuses in the fuse panel and the negative cable on the car battery and you're finished.
OBD Tools 365 Days Shop

Jan 13, 2014 | 2003 Nissan Altima 3.5 SE

1 Answer

A/c filter location


either behind the glove box or under the passenger side dash. If in the glove box you have to remove the door (I remember seeing this somewhere.)

May 18, 2012 | 1994 Lexus Es 300

1 Answer

How do I change cabin air filter in 2006 m35? video or pics?


First, you need to remove the glove box: Open the glove box. There are three hinge points at the bottom of the box (left, center and right). There are "tabs" on the box that slide into these "holders". Gently pull up and out on the left side of the glove box. The tab should pop out. Repeat for the center point. This should allow the left side stop pin to clear the dash slot. Repeat for the right side. You should now be able to turn the box, pull it from the dash and let it hang from the retaining cord on the right side. Note the hinge slots and tabs for reference for re-installation later. Second, remove the black access door behind the glove box: This is an "L" shaped cover with three hinge points at the bottom and three tabs at the top. Gently push back on the tabs at the top to un-lock, rotate down on the hinge points and pull out. Behind this you will see a white plastic door which covers and holds the filter in place. Third, remove white access door as follows or you will break the retaining tabs off! On the right side is a locking tab, gently press in and pull the right side of the tab toward you to unlock the tab BUT STOP AS SOON AS THE TAB UNLOCKS THE DOOR AND OPENS ABOUT ½ " or the tabs on the left side will break off, they are not hinged! Next, slide the door to the right to clear the tabs on the left side and remove. Note the position and orientation of the filter inside. Remove the old filter. Fourth, install the new filter: Make sure the orientation and air flow direction are as marked and match previous filter. Mine was pointing "up", with the rigid side plate facing out. The new filter will be sitting on top of the fan, when the white door is re-installed, it has "fingers" that lift the filter into the proper location, but you may find it easier to lift the filter up with one hand and slide the door back into position with the other hand. That said, lift the filter, slide the tabs on the left side of the door back into there slots. Push the door back into original position and latch the right side locking tab. Make sure the door is sealed and back to original position and latch tab on the right is locked. Now, reverse the previous steps to complete the task. Re-install the black access door cover. Lift up the glove box and turn to install right side stop pin into dash slot position, rotate left side into position and center box in dash opening. You will have to move the box up/down, in/out a bit to "feel" the hinge tabs properly engage the hinge slots. Once the tabs are in the slots you can push down on each side and it will pop back in place. (If you have difficulty, you may want to remove the under dash cover below the glove box. There are three tabs in the front that slide into three slots and one tab and slot in the rear. This can be removed by pulling down on the front of the panel at each side and the middle, then slide it forward out of the rear slot. Disconnect the light if required by pushing the latch on the plug and pulling it off. Feel around the hinge locations to guide the parts together).


Read more: http://wiki.answers.com/Q/How_do_you_change_the_cabin_air_filter_on_a_2006_Infiniti_M35#ixzz1NKCLa6qC

May 25, 2011 | 2006 Infiniti M35

1 Answer

Hjow do i rermove the radio from my 325 i 2003



Removal & Installation-of dashboard which includes removing radio.


CAUTION Many BMW models covered by this manual are equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, properly disable the SRS.
The instrument panel removal is complex and requires disconnecting many components. Make sure to label and organize the components as they are disconnected, disassembled or removed.
3 Series Models

  1. Disconnect the negative battery cable. If equipped with a Supplemental Restraint System (SRS), wait for a period of 11 minutes before proceeding.
  2. If equipped, disable and remove the SRS components as necessary.
  3. Remove center console as outlined in this section.
  4. Remove the glove box compartment as follows:
    1. Open the glove box door and remove glove compartment mounting screws.
    2. Pull glove box compartment outward, and disconnect the electrical connectors as necessary.

  5. Remove lower left dash trim piece as follows:
    1. Remove the lower dash panel mounting screws.
    2. Pull the lower dash panel to the left and back and disengage it from the driver's side footwell retaining clips.

  6. If equipped, remove the driver's side and passenger airbags.


CAUTION Make sure to store the airbags properly in a safe area.
  1. Remove steering wheel.
  2. Remove driver side knee bolster fasteners and remove.
  3. Remove the following components:

    Instrument cluster Headlight switch Radio Climate control head and module.
  4. Remove the turn signal and windshield wiper/washer stalk switches as outlined in Section 8.
  5. Remove windshield (A-pillar) trim from both left and right sides.
  6. Remove the reinforcement bar below the steering column, then remove steering column shear bolts. Carefully lower steering lightly and support the column to avoid damaging the spindles.


WARNING Lowering the steering column too far can damage the spindles.
  1. Remove the glove compartment support frame fasteners, then remove the frame assembly.
  2. Carefully release and lift out the defroster outlets (both left and right sides) at base of windshield. Remove the screws located below the outlets.
  3. Remove the mounting bolts on the left and right sides of the dash board assembly.
  4. Carefully lift the instrument trim panel off slowly. Make sure all harness connectors and wiring are disconnected.
  5. Installation is the reverse of the removal procedure.

Z3 Models
  1. Disconnect the negative battery cable. Wait for a period of 11 minutes before proceeding.
  2. Disable and remove the (SRS) components as necessary.
  3. Remove center console as outlined in this section.


CAUTION Make sure to store the airbags properly in a safe area.
  1. Remove steering wheel.
  2. Remove driver side knee bolster fasteners and remove.
  3. Remove the following components:

    Instrument cluster Headlight switch Radio Climate control head and module.
  4. Remove the turn signal and windshield wiper/washer stalk switches as outlined in Section 8.
  5. Open the glove box, remove the four finishing caps near the glove box door lock catch and remove the screws.
  6. Remove the trim caps and screws from the far right end of dash and next to the center air vents on right side of the center console.
  7. Close the glove box, then pull it downward and out slightly.
  8. Remove the two screws securing the glove box cover and remove the cover.
  9. Remove the two fasteners securing the passenger side air bag bracket-to-support brace.
  10. Remove the two mounting fasteners on each end of instrument panel, in the door jamb areas.
  11. Remove the two mounting fasteners located under center air vents.
  12. Remove screw trim caps at the base of windshield and remove the screws.
  13. Carefully lift the instrument panel up and remove it from the passenger (right) side of the vehicle.
  14. Installation is the reverse of the removal procedure.

Nov 12, 2010 | 2003 BMW 325

2 Answers

Location of blower motor resister for 1995 gmc k1500


On the passenger side. Right on top of the black plastic housing. You have to take the glove box, dash, etc. to get it out.

Mar 12, 2010 | 1995 GMC Sierra C1500

3 Answers

Where is the fuse box location 1989 buick lesabre


Hi J_livezey,
Your fuse box is located behind the right side of the dash,to the right of the glove box.Here is a diagram to better expalin.If you need anything else,let me know. Thanks,Chuck.1da4d0d.gif

Mar 10, 2010 | 1989 Buick LeSabre

1 Answer

How to change cabin air filter in toyota avalon 2002?


1) Turn off the ignition switch while leaving the wipers in the up position. 2) Open the hood and properly secure it in the open position. 3) Gently pull the rubber cowl seal away from the cowl vent screen. Place your hand underneath the right half of the cowl vent screen and lift straight up, thereby releasing the four spring clips and removing the right half of the screen 4) Remove the water shield. Carefully disengage the two water shield locking tabs and slide the water shield toward the front of the vehicle, lifting the water shield up and away from the vehicle 5) Remove the Passenger Compartment Air Filter, being careful not to allow debris or loose components to fall into the filter housing. Replace the Passenger Compartment Air Filter with a fresh filter and reverse the above procedures to reassemble the vehicle components. �
I am not sure what time in the year your 2001 Avalon was built but her is the procedure that I just followed: 1. Open glove box and remove contents 2. Remove the three philips head screws along the top inside frame of the glove box. 3. Remove the hex head bolt in the lower right and Philips screw in the lower left side of the glove box frame. 4. Unlatch the black cover plate from the roof of the glove box. This holds an electrical connection and will need pushed up through the hole when the entire box is removed. 5. Pull on the top left side of the glove box to release the pop tab. Repeat on the right side. 6. Carefully lower the glove box assembly. 7. Disconnect the electrical connection to the trunk disable button 8. The entire glove box can now be removed from the area. The door gear assembly does not come off of the box and is easily damaged if attempted to do so. 9. The Cabin Air Filter assembly has a white cover. Pop the tabs on the right and left side and slide the assembly out. 10. Replace the filter in the assembly. Make sure the airflow indicator points down. 11. Re-Install Air Filter assembly. 12. Re-Install the electrical connections remembering to slide the one through the hole in the top of the glove box. 13. Push glove box assembly on pop tabs. 14. Re-Install screws and bolts. 15. Reconnect the black cover plate to the top of the glove box.
rate it

Jan 08, 2010 | 2002 Toyota Avalon

1 Answer

How do you change the cabin air filter in a 2009 Hyundai Sonata?


I just did this on our 2007 Sonata. 1. open the glove box. On both sides of the glove box, there is a black tab which prevents the glove box from opening to far. The Chilton manual says to remove these, but that is more difficult then simply pressing inward on the sides of the glove box to release them from the channel. Now the glove box should open even more. Next, remove the piston arm from the right side of the glove box. You can do this by removing the panel on the side of the dash, but you first need to open the passenger door. You can also just use a screwdriver or other tool to slip the piston of without removing the dash side panel. Now with the glove box hanging fully open, you can see the cabin filter box. There are tabs on both sides of the front that you simply press together in order to slide the filter out of the box. This whole process from beginning to end should only take about 10 minutes and is very simple.

Dec 23, 2009 | 2009 Hyundai Sonata

2 Answers

How does glove box come off to replace air cabin filter ?


First, take a good look at what you’re doing.
Look on the right side of open glove box and locate a plastic lever. You will see grooves on the end connected to the glove box. The grooved area is the spot to place the thumb in order to press this lever off the glove box when it comes time to do that.
Look up under the glove box. You will see two brass colored screws one on each side of the bottom of the glove box. These screws go up through two square plastic hinges that are attached to the glove box and into the the dash frame.
Okay, with the glove box closed remove the two brass colored screws, and put them aside so you won’t lose them..
Open the glove box and hold the glove box with your left hand and press on the plastic lever (grooved area) located on the right side of the glove box. This lever (the lever already mentioned above) is slotted and will pop off the glove box.
Put the glove box carefully aside.
Look straight in behind the glove box. You will see a rectangular black plastic cover approximately 1.5 inches wide by 8 inches long. On the right and left side are arrows pointing in. Press the arrows and pull out on the cover. This will slide out the tray that holds the filter. Remove old filter and insert the new one, flow arrows pointing down.
Retrieve glove box, hold in place, and attach plastic plastic lever to the right side of the glove box. The reverse of removal.
Next, the two plastic hinges located on the bottom of the glove box fit underneath the dash frame.
While holding the glove box in place (the glove box latch may hold glove box in place while installing screws) re-install the two screws through the plastic hinges into the frame and tighten.
Hope this helps you.

Oct 30, 2009 | 2004 Honda Accord

3 Answers

How to replace the cabin air filter in a 2000 toyota avalon xls


lower the glove box and its forward of that, should be a plastic panel to remove.

Sep 23, 2009 | 2004 Toyota Avalon

Not finding what you are looking for?
2009 Nissan Pathfinder Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...