Question about 1993 Cadillac Allante

Open Question

Need instructions for lowering top on 93 Allante

Need instructions for operating soft top on 93 Allante

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

93 Allante AC Compressor won't come on to recharge system

On most models you would need to jumper the low pressure switch while you are recharging the system. There should be a low pressure switch on the low side line and a high pressure switch on the high side or on the compressor.

Jul 14, 2014 | Cadillac Allante Cars & Trucks

1 Answer

Where is the ecu for the 1987 allante?

It is behind the right side of the instrument panel.

With that said, it deserves mention that your 1987 Cadillac Allante is capable of self-diagnostics and system status/fault code display through the Instrument Panel Cluster (IPC) and the Climate Control Driver Information Center (CCDIC) panel display. It is like a professional scan tool built right into the car.

For information on how to use this feature and complete diagnostic instructions, I recommend that you subscribe to The pricing is extremely reasonable, and all the technical/repair information you will ever need for your Cadillac can be found there. (It is the same information that I would use if you brought your vehicle to me for repair.)

May 04, 2012 | Cadillac Allante Cars & Trucks

1 Answer

Can't seem to locate the starter on a 1993 cadillac allante

Hello: Raise the car on the drivers side, go under the car toward the driver side from the front. The starter is on the lower side of the engine toward the front of the car. It is held to the engine with two 15mm bolts and a bracket in the front. It has a purple wire and a red cable attached to the starter solenoid.

Nov 09, 2010 | 1993 Cadillac Allante

1 Answer

Cannot put top up on 1987 allante the latch is locked in and icannot open the latch on the pull down motor

There's a switch ( kinda same shape, color & operation method as your power seat switches) behind driver's seat near the 2 Boot/Top 'release' pull tabs,, it's mounted on the "roof" of the open compartment area behind the seats. Slide your hand along there til you feel it. It recycles the pull-down motor up & down & should release the top. Also try in the trunck, there's 2 hard plastic strings with loops at end,, pull & see if it releases it.

Oct 22, 2010 | 1987 Cadillac Allante

1 Answer

Code 48 appears with the 93 Allante. It says EBTCM modular problem or a Brake pressure modulator, Information center on car says Traction disabled, abs disabled and low brake fluid The red brake light...

Before replacing any expensive parts replace the brake fluid sensor. disconnect the electrical connector. squeeze the two tabs together and push it out slide the new one in and connect the electrical connector, then road test it. This sensor is on the bottom of the brake fluid reservior, you DO NOT have to drain the fluid out

Sep 11, 2010 | 1993 Cadillac Allante

1 Answer

Top issue rear latch does not sem to catch switch under driver side does nothing it seems like it should go up to grab latch but nothing happens. 1993 allante

Try flipping the lever in the pull-down unit, get it to RAISE up high enough to catch the soft top latch. Hope this helps

May 14, 2009 | 1993 Cadillac Allante

Not finding what you are looking for?
1993 Cadillac Allante Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides