Question about 1993 Chevrolet S-10 Blazer

1 Answer

My 1993 chev blazer slips into neutral while driving what is wrong?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 356 Answers

If its a manual transmission then your synchronizers are going bad it sounds like to me.

If it's an automatic tranny, then check your fluids to make sure they are at the proper levels.

Posted on Oct 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to tow a 1993 S10 Blazer w/ electronic 2/4 WD control - NO battery - with low/no trans fluid. Will the vehicle be in true neutral without battery or will the trans get rotation and risk of seizing?


yes being elctronic no power = 2wd But if your putting on a wrecker or dolly rear tires need to be off ground and there no need to put tranny in neutral
in case of towing with rear tires on ground drive shaft needs to be removed because even in neutral gears in tranny will still turn but there be no oil circulating
This is true for all cars and trucks 2wd or 4wd
but on front wheel drive it front wheels u need to worry about

Jun 07, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

Need to change alternator on 1993 chev 4wd 4 door blazer engine 4.3 liter


ok no problem. first off unhook the possitive on the battery. then find the belt tensioner. there should be a sqaure hole in it for a rachet to go into. use the rachet(usually the 3/8's drive)to move the tensioner to where you can slip the belt off the alternator. then remove the nut off the back of the alternator to take the hot wire off. Then there is a plug on the back of the alternator. unplug it. next take the three bolts out of it and remove it. then put the new one on and repeat steps in reverse. If you have problems with how the belt goes back on then look around the engine bay. usually there will be a sticker with how it goes.

Jul 29, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

1993 chev 4x4 5 spd w/241. The transfer case slips into neutral when downshifting.


Is there a body lift kit on the truck? It may have to do with the linkage from the lever to the case.

Apr 22, 2009 | 1993 Chevrolet K1500

1 Answer

4 wheel drive not working


Vacume lines or vacume switch on transfer case,or vacume pod to front axle.

Jan 05, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

Nuetrual 4wd option


Push button 4WD has no neutral option. It is either in 2wd, 4hi, or 4low.

Dec 13, 2008 | 1999 Chevrolet Blazer

1 Answer

1993 chevy blazer S10


That is a very common problem with General Motors 700R4 transmission. There is a shell that encases the majority of the forward gears and the reverse drum is on top of it and that completely encases the forward drum. at the bottom of that shell there is a collar that is about one quarter of an inch long that rides on a gear set called planetarys. those have a problem with breaking and cause no reverse and driving in neutral. that is the link between the front and rear shaft of the transmission and the weak link. for that to be repaired it has to be removed from the truck and taken apart. It is highly recommended that it be completly rebuilt not just patched due to all of the metal that is sent through the transmission.

Sep 13, 2008 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
1993 Chevrolet S-10 Blazer Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...