Air suspension out (inactive ) code

1. The automatic suspension system on a Land Rover must be placed in a service mode (High Lock) prior to raising the vehicle on a frame-contact hoist. This can only be accomplished by using a Land Rover Test Book Scan tool or an aftermarket equivalent.

2. If the suspension is allowed to hang freely at maximum extension, the suspension controller will enter a fault lockout mode and disable the compressor and height sensors

3. In addition, the suspension system will vent the suspension in an attempt to bring the vehicle to a correct ride height.

4. Since the suspension is hanging free at maximum extension, all the air will be vented, causing the vehicle to sit at maximum low when taken off the frame-contact hoist. A Land Rover Test Book Scan Tool or an equivalent is required to reset the suspension once it has entered the lockout mode.