I would like to know where eadh is located, for replacement.
The camshaft and crankshaft are located internally in the engine. To replace the engine would have to come out and completly rebuilt. Unless you have alot of experience in rebuilding engines I don't reccomend attempting this on your own. These are major compotents and have to be installed and aligned properly.
?€¢
Engine control module (ECM) replacement
?€¢
Crankshaft damper replacement
?€¢
Crankshaft replacement
?€¢
CKP sensor replacement
?€¢
Any engine repairs which disturb the crankshaft to CKP sensor relationship
Important: The scan tool monitors certain component signals to determine if all the conditions are met to continue with the CKP system variation learn procedure. The scan tool only displays the condition that inhibits the procedure. The scan tool monitors the following components:
?€¢
CKP sensor activity--If there is a CKP sensor condition, refer to the applicable DTC that set.
?€¢
Camshaft position (CMP) signal activity--If there is a CMP signal condition, refer to the applicable DTC that set.
?€¢
Engine coolant temperature (ECT)--If the engine coolant temperature is not warm enough, idle the engine until the engine coolant temperature reaches the correct temperature.
•
How to test Crankshaft Position CKP Sensor?
---------------
Crankshaft Position Sensor Operation?
----------------
Replace Camshaft position sensor and Crankshaft Position Sensor?
http://technoanswers.blogspot.in/2012/06/2005-dodge-durango-replace-camshaft.html
----------
GMC Crankshaft Position (CKP) Sensor
Replacing?
http://schematicsdiagram.blogspot.com/2011/12/gmc-crankshaft-position-ckp-sensor.html
------------
These details will help.
Thanks.
96 views
Usually answered in minutes!
×