At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I was unable to find the bolt pattern on a 1995 Chevy k1500 5.7ltr. It might tell you in the owners manual.------------------------------------------------------------------------------------ Launch X-431 IV Auto Scanner
no they gave you wrong bolt pattern . dont matter 13,14,15,16 long as bolt pattern rigth . measure bolt pattern .on 5 lug measure from one stud to the one across from it . maybe 5 inch or 5 1/4 bolt pattern. trucks wheels are differnt than car pattern.
Take a tape measure and measure from the center of one hole in the rim to the one next to it. write that measurement down. Now measure from the center of one of your lug nuts on your bravada to the center of the lug nut next to it. If the measurements match exactly, the rims should fit.
Yes they will swap out nicely, the years where they made the change is in 1997 and the only difference is the transmission end housing has a different bolt pattern but has the same internal parts. You may also want to swap out the servo's with a corvette servo. The cost is around $45.00 and can be done without dropping the transmission pan, this will make your transmission shift firmer and will have less clutch slip[ between gear shifts. Good luck and hope this information helps.
they used 2 different transmissions eighther a 4L60E,or a 4L80E you can usualy tell by the amount of bolts in the pan check with local autoparts dealer for exact number each has
The best publication out is printed especially for this its the HOLLANDERS INTERCHANGE BOOK this is the bood and program wrecking yards use to know which parts fit which cars and for how many years.
×