Need the coil pack firing order for my 97 Buick Park Avenue.

Check this site I believe the black images is the coil pack firing order. I used a coil pack from a different model but had to open it up and change the firing order since the spark wires wouldn't reach for my 91 buick. You should have some knowledge about wiring before attempting that. Basically I just switched the wiring on each side inside the coil pack.https://www.google.com/search?q=buick+1991+park+avenue+firing+order&tbm=isch&tbo=u&source=univ&sa=X&ei=reisU9eSH9HioAThh4D4BQ&ved=0CC8QsAQ&biw=1440&bih=748

fire order should be under hood on engine

asd relay or fuse
camshaft not spinning
bad pcm
damaged wiring harness

Check this information about 1986 Buick Park Avenue 3.8 liter V-6 VIN "B"
Identifying Ignition Types I and II...

* On Type I coil packs, three twin tower ignition coils are combined into a single coil pack unit.




* On Type II coil packs, the coils can be replaced separately and the ignition wires are all on the same side of the coil pack.

With Type I Ignition



With Type II Ignition




Hope this helps (remember to rate this free answer with thumbs and leave some testimonial).

1991 Buick Park Avenue 3.8 liter V-6 VIN "L"

Identifying Ignition Types I and II
On Type I coil packs, three twin tower ignition coils are combined into a single coil pack unit.




On Type II coil packs, the coils can be replaced separately and the ignition wires are all on the same side of the coil pack.

With Type I Ignition




Hope this helps (remember to rate and comment this answer).

the coil pack is the magnavox type. see the link http://www.autozone.com/autozone/parts/1991-Buick-Park-Avenue-Ultra/Ignition-Coil/_/N-jcxqmZ9n80r?filterByKeyWord=ignition+coil&fromString=search

1999 Buick Park Avenue 3.8 liter V-6 VIN "K"



Hope helps (remember rated this).

Firing Order:
1-6-5-4-3-2
Cylinders:
....(back)
2......4......6
1......3......5
.....(front)

Coil Connections:
For the 3.8L SC VIN IDENTIFIER "1":
(back)
___
....o <-----6
O
....o <-----3
____
....o <-----2
O
....o <-----5
____
....o <-----4
O
....o <-----1
(front)

For the 3.8L V6 VIN IDENTIFIER "L"
There are two Types of Ignition Coil Packs:
Type I and Type II.
Type I is a Retangle Shaped Box.
Tyoe II has three cylindrical (round) shaped towers.
For Type I: Rectangle Shaped Box.
(back)
3
.........6
5
.........2
1
.........4
(front)

Type II: Three Cylindrical (round) shaped towers.
(back)
....o <------6
O-tower
....o <------3
....o <------2
O-tower
....o <------5
....o <------4
O-tower
....o <------1

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

1988 Buick Electra Park Avenue 3.8 liter V-6 VIN "3"
Identifying Ignition Types I and II

On Type I coil packs, three twin tower ignition coils are combined into a single coil pack unit

.

On Type II coil packs, the coils can be replaced separatelyand the ignition wires are all on the same side of the coil pack.
With Type I Ignition





With Type II Ignition



or...





Good luck.

On the magnavox coil pack the opposite plug on the coil pack fires at the same time. If it is dead only on one side it may be the coil pack {six terminals on one brick looking unit.}