Question about 2000 Chevrolet S-10
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: torque specs.
connecting rod = first pass 18 ft lbs , second pass 75 degrees
main bearings = first pass 37 ft lbs , second pass 77 degrees
wow that wasn't easy to find for some reason .
Posted on Jan 01, 2009
I dont know the specific answer for your question, but I own a 1995 Rodeo and there is an online community you could probably check out that Im sure would have the answer for you.
Check out www.planetisuzoo.com, sign up and post your question there. There are several knowledgeable people there and some good information as well.
Posted on Jan 03, 2009
Those values and most everything else you need for DIY work are contained in the Haynes manual for your vehicle.
We have one with each of our vehicles and not only give you the info needed to do repairs yourself but also get an idea of how much work a specific repair should (or shouldn't) cost.
'88 Chevy pickup manual
You can also buy these from auto parts stores for a few dollars less and sometimes on eBay for even less.
Posted on Feb 20, 2010
Crank Main caps Tightening Torque
For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts
Start from center bolts and tighten in a clockwise rotation working out
Step 1 all bolts 22 Nm or 16 ft lb
Step 2 all bolts 44 Nm or 32 ft lb
Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Hexagon Head Bearing Cap Sub-Assembly Bolts
1ZZ-FE Engine 18.5 Nm (14 ft.lb)
2ZZ-GE Engine 18 Nm (13 ft.lb)
1. Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.
2. Install and alternately tighten the 2 connecting rod cap bolts in several passes. Torque: 1ZZ-FE: 20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE: 30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts.
3. Retighten the cap bolts by 90° more
4. Check that the crankshaft turns smoothly.
Posted on Mar 19, 2010
Tips for a great answer:
Dec 19, 2017 | 2005 Chevrolet Aveo
Mar 23, 2011 | 1996 Mitsubishi Eclipse
Jan 15, 2011 | 2000 Ford Taurus
Jul 02, 2010 | 2000 Nissan Xterra
May 31, 2010 | 1995 Ford F150 Styleside Regular Cab
May 17, 2010 | 1997 Ford F150 Regular Cab
Mar 18, 2010 | 2000 Toyota Celica
Feb 20, 2010 | 1988 Chevrolet C1500
Jul 10, 2009 | 1994 Isuzu Trooper
301 people viewed this question
Usually answered in minutes!