Question about 1995 Chevrolet Blazer

1 Answer

Need a diagram of how the door panel comes off of a 95 chevy blazer. I need to remove the door panel to fix the lock assembly. Need to know if there are clips at the bottom of the door, or just the screws.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

There will always be clips attached to the panel from the inside-after screw removal and window crank removal (window crank on mostly earlier models) You can start at a bottom edge with what i recommend a door panel removal tool-most auto parts store carry these. even if a clip falls out you can reinsert it.Also the door removel tool doubles as a window crank clip remover.

Posted on Sep 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 chevy blazer


The wires provided for a radio system are as follows:
yellow = hot with ignition key ON
orange = hot from BATT at all times
Grey = dimming power from instrument panel

Black = ground

Harness Wires provided for the speakers as follows:
Left rear speaker = +brown -yellow
Right rear speaker = +dark blue - light blue
Left front door speaker and tweeter = +tan - grey
Right front door speaker and tweeter = +light green -grey
Note: connection colors at the speaker location differ as noted:
Right front door = +brown -yellow
Left front door = +brown -yellow
All other speaker connections are consistent with their harness colors.

Sep 25, 2014 | 1995 Chevrolet Blazer

3 Answers

Need wiring diagram of 1995 chevy blazer 4x4 with 4.3 vortex engine


need email address to send diagrams, need to know what parts of electrial you need

Feb 07, 2010 | 1995 Chevrolet Blazer

1 Answer

95 S10 blazer 4dr power door locks inop, new battery installed in remote, all fuses good, still inop?


1. Locate the red two wired programming connector located near the central locking control module that is located behind LH Lower instrument panel. Drop the panel and you will see the red programming connector that is not connected to anything.
2. Inside the Red programming connector you will see to pins..
Jump two pins with a section of wire.
3. System should now lock and unlock doors to indicate vehicle has entered programming mode.
4. Press any button on keyless remote once. System should now lock and unlock doors indicating the keyless remote has been programmed.
5. Repeat step 4 to program other remote.
6. Remove jumper wire from programming connector to exit programming mode.
7. Test Remote(s)

Dec 22, 2009 | 1995 Chevrolet Blazer

7 Answers

Dome lights won't turn off


Been having a problem with the dome lights on a 99 chevy blazer. Still can't figure out what the problem is. There is a dome light overide button located under the dimmer wheel. When I push the overide button in the dome light goes off, but when I open any of the doors the dome light will not come on. When the overide button is out the dome light stays on all the time and will not turn off even though every door is closed. I checked all the pushbuttons and everything tests good. Has anyone had this problem and know how to fix it?

Sep 04, 2009 | 1997 Chevrolet Blazer

2 Answers

Wiring diagram for 92 chevy blazer


My 1992 Chevy blazer s-10 starts and then the door locks automatically starts locking and unlocking...It wont stay running either...

Jun 11, 2009 | 1992 Chevrolet S-10 Blazer

1 Answer

Need instructions to install replacement side view mirrors for 95 chevy blazer


You will have to remove the door panel, behind the triangle piece on the top right of the drivers side door panel you will see 3 nuts which hold the mirror in place. Remove the nuts and the mirror should come right off the door. Same on the passenger side.

Jun 03, 2009 | 1995 Chevrolet Blazer

1 Answer

I am trying to remove my 95 blazer pass. front door panel and cannot get the plastic around the door handle to come apart and I know that it has to come apart somehow to get the door panel over the door...


Possibly a clip on the inside i know for most of the plastics on my 95 there are hidden clips the need to be pressed or lifted with a screw driver to get off. They **** because if its to cold they mostly brake so if you do run into them i would advise getting a hair dryer and heating them up first if your doing it outside or if its a nice day you shouldnt have to worry about it.

Lemme know if this helps : )

Feb 24, 2009 | 1995 Chevrolet Blazer

1 Answer

95 blazer, front driver window motor broken need to get window up


When removing the door panel, you need to remove all of the screws first. Then pull the door panel off. There should be screws around the edges or the door panel, and 1-2 screw on the door handle(on the inside). Then pop the door panel off, if the blazer has electric windows and locks you have to disconect them first, if it doesnt have power locks and windows, you have to take the window crank off,there should be a screw in the center of that. Unscrew the door lock and pull up. If it doesnt have them locks then you have to disconect it from inside the door panel

Nov 30, 2008 | 1995 Chevrolet Blazer

1 Answer

1995 Chevy Blazer Wire Color Codes


95-97 blazer or 94-97 S-10
12volts red (there will be 2)+ ignition harness
Starter purple or yellow + ignition harness
Ignition pink + ignition harness
Second Ignition white or pink/white + ignition harness
Accessory orange + ignition harness
Power Lock lt. blue + either kick panel
Power Unlock white + either kick panel
Lock Motor gray drivers kick panel
Unlock Motor tan drivers kick panel
Parking Lights+ brown switch or rear harness
Door Trigger white - keyless module
Dome Supervision use door trigger
Trunk/Hatch Pin tied in with doors
Trunk/Hatch Release black/white + switch or keyless
Tachometer white AC ECM
Brake Wire white + at brake pedal switch
Parking Brake black at the pedal
Horn Trigger black - steering column

Jun 13, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

82149 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...