Question about 2000 Volkswagen Golf

1 Answer

How do i replace interior reading light bulbs? i can not remove the fixture.

Posted by on

  • mbogo19 Sep 20, 2009

    2002 volkswagon golf



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

Make,model and year?

Posted on Sep 20, 2009


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: replacing brake light bulbs

push the bulb in nd twist counter clockwise and the bulb should come right out.

Posted on Oct 30, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replacing license plate bulb 2008 Honda Odyssey how do I replace the bulb

often have an access panel you can remove to acces the bulbs from the rear door on the inside, if not you must remove the light fixture from the outside either my removing a screw holding the light housing or carefully pulling the plastic lens out, generally there is a or multiple screws holding the light fixture in place.

Jan 30, 2017 | Honda Cars & Trucks

1 Answer

How do i replace brake light bulb on 2005 mazda bounty

Gain access to the light fixture, remove the bulb holder, remove the burned out bulb and replace with new, test, then re-install the bulb holder and re-install the fixture.

If you need further help, I’m available over the phone at

Aug 30, 2014 | Cars & Trucks

1 Answer

Audi A4 2004 interior lights not working

Lights may be turned off at the fixtures

Jun 27, 2017 | 2004 Audi A4

2 Answers

Interior light fuse keeps blowing on 2003 cadillac deville

Sounds like you need help

Have a repair shop resolve

When you start putting larger fuses into any
electrical device, your not thinking clearly & need
to stop & have some else resolve things

Jan 30, 2013 | Cars & Trucks

1 Answer

Need to replace low beam light in my 2002 GMC Safari Van how do I do it?

Open the hood & near the top of the headlight you will see 2 bolts (10mm), remove them. You will notice the whole headlight assembly is loose from the top. Look down into the headlight assembly to the left & you will see another 10mm bolt that connects the outside light fixture. Remove the bolt & that light fixture will fall out (top first). Behind that light fixture you will see your last bolt when you look at the front of the vehicle. Remove it & now the entire light assembly will slide out & give you access to the both high beam & low beam bulbs. Hope this helps.

Read more:

Sep 07, 2012 | Cars & Trucks

2 Answers

Tail light bulb replacement on 2010 dodge challenger

there should be a fixture in the boot/trunk that holds the lights,that clips into a panel, find the clips that hold it in and release the lights fixture then you can change the bulb, clip fixture back in

Oct 08, 2011 | 2010 Dodge Challenger

1 Answer

The bulb near the rear window how to acces the bulb to change it, and whats the part number.

Interior llights usually need removed to get the size of the bulb. The fixture could have been replaced. For a standard Ford fixture, squeeze the two larger sides together, while pulling downward & the cover should come off.

Sep 19, 2011 | Ford Five Hundred Cars & Trucks

2 Answers

I have a 2009 honda civic lx-s and when i tried replacing the trunk light with a brighter one, all of a sudden it broke. my interior dom and map lights stopped working as well. how do i fix this problem?

It sounds like you just blew the fuse for the interior lights. Check your fuse panel and replace the fuse. Was it just the bulb that broke or the light fixture, itself? If the light fixture is broken, you should remove it before replacing the fuse, and make sure the power wire is not touching ground. Tape up the end(s) of the wire(s), then replace the fuse.

Feb 21, 2011 | 2009 Honda Civic

2 Answers

Fuse blowing on interior light/ remote

Was the bulb the same size and watt as the one you removed? Did you possibly cause a short in the fixture. I do not recomend using a larger fuse due to possible wiring dammage (risk of fire). Check the bulb for size and wattage/voltage check the holder to make sure it is not grounding out. Carefully check each step 2x.

Sep 20, 2009 | 2005 Volkswagen Passat

1 Answer

How do I replace a Tail Light on a 2002 Honda CRV

Pretty simple just remove the light fixture then you just have to remove the bulbs from the fixture and wire assembly remains intact then just fit the same bulbs in to the new light fixture without removing the wire assembly.

Dec 27, 2008 | 2002 Honda CR-V

Not finding what you are looking for?
2000 Volkswagen Golf Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers


Level 3 Expert

83772 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides