Question about 1990 Toyota Celica

1 Answer

Oil above 1st and 2nd cylinder plugs and also heavely in side 1st cylerder

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 73 Answers

You need to reseal your spark plug tubes, remove the valve cover unscrew the tubes apply sealer to the tubes and reinstall.

Posted on Sep 20, 2009

Testimonial: "thanks heaps the first time theres help that didnt cost an arm and a leg cheers"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head bolt torque?


M11 bolts: 1st step; - 22 ft./lbs. 2nd step; - turn 150 degrees M8 bolts 9-10: 1st step; - 11 ft./lbs. 2nd step; - turn 75 degrees Note: Do not reuse cylinder head bolts. Do not allow oil on cylinder head, head bolt bosses.

Apr 27, 2016 | 2007 Suzuki XL-7

1 Answer

Manual transmission


have you checked the oil level? Transmission oil should be up to the fill plug, when it is removed. Somewhere on the side, about half way up. That is where it is filled also.

Jan 30, 2014 | 1997 Nissan Pickup

1 Answer

Leaking from the front of bellhouseing


Gday mate,geoff here, there are 3 things that can leak there, 1st is coolant as there should be a freeze plug at the back of each cylinder bank in there.
2nd engine oil as there is a seal on the crankshaft and a plug at the back of the Cam tunnel, mostly if its engine oil it will be the crank seal.
3rd is gear/transmission oil, front seal on the gearbox if that is the case, also make sure that the oil isn't coming from the top and leaking down to look like its the bell housing leaking, as the valley cover and rocker covers extend back to just above the bell housing, hope this helps, geoff.

Feb 11, 2012 | 1997 Ford F250 SuperCab

2 Answers

When starting, clutch down 1st gear turning key truck jumps forward, will start but need to be ready to take off in gear that started in. starts fine in neutral.but won't go into gear without grinding


1st check your clutch system, that is most probably where the issue is as the gearbox rarely ever gives issues

2nd check the oil for your gear box. the oil should help the gears as they move into action or move out.

Mar 31, 2011 | 1985 Nissan Pickup

1 Answer

Hard shifting from 1st to 2nd


I have been hearing a possible solution for this problem is changing the oil filter in the trans oil pan. But ive been looking all over for a solutionand thats the only legit one ive found. It said when the oil gets clogged it doesnt flow to the transmission as nicely as normal therefore leading to lagging changes

Mar 21, 2010 | 2003 Chevrolet Monte Carlo

2 Answers

Mixed the spark plug cables how can i get them back in order?


1ST DIAGRAM IS FOR A 4 CYLINDER, 2ND A V6, YOUR CAR CAME WITH EITHER ENGINE.

c373d8b.gif
3950aa8.gif

Mar 09, 2010 | 1999 Chevrolet Malibu

1 Answer

1987 190e Mercedes shooting oil from valve cover in to air cleaner area.


Could be a couple of things.

1st the valve cover gasket is shot because its old.
2nd blocked oil breather is causing high oil pressure which blew the gasket mentioned above.

Replace the gasket 1st and see what happens.

Mar 03, 2010 | 1992 Mercedes-Benz 190

1 Answer

Spark plug wiring on 2001 Toyota 4 Runner, need a diagram to know which coil on the passenger side hooks to which plug on the drivers side.


1st coil goes to 2nd plug on lh side
2nd coil goes to 3rd plug on lh side
3rd coil goes to 1st plug on lh side

Feb 07, 2010 | 2001 Toyota 4Runner

1 Answer

I replaced the cap and rotor, i might have put the plus on different, it keeps cutting out on me....


  • 1st screw on dist. at 11 oclock facing rear of car. 2nd screw 5 oclock...1st plug counterclok of 2nd screw is 1... now clockwise 8,4,3,6,5,7,2- left cylinders, front to back 2,4,6,8 and right cylinders 1,3,5,7

Sep 23, 2009 | 1993 GMC Sierra

3 Answers

Oil leak?


Whoa whoa ... You've said that the car takes 7 quarts of oil. That's 14 pints. Depending on which engine variant is fitted, engine oil capacity is either:
  • 5.75 litres + 0.4 litre if the oil cooler is drained
  • Turbo - 3.85 litres + 0.6 litre if the oil cooler is drained
  • These figures are for a UK 3 litre version of the 960
If you've filled the car with 7 quarts of engine oil that's almost twice as much oil as should be in the engine. Did you mean pints when you wrote quarts?

If you've filled it with 7 quarts it's overfull. Way too full. Check your oil dipstick - remove it, wipe it clean and then dip the oil level. At the bottom of the dipstick there is a flattened wider part. The oil level should not be below the bottom of this marker, and nor should it be above it. If the oil level is way above the flattened marker bar - you're overfull and will have to drain some oil out of the engine. An overfilled engine will try and blow oil out from wherever it can as the oil system will over-pressurised.

Ok .. so there's no problem with the engine compression. The crankcase isn't overfilled with oil (the crankcase is known as the oil sump in the UK). There's no oil fouling of the plugs and the car isn't burning oil, just leaking it. There's no misfires or running

If the engine isn't overfilled with oil there may be a problem with a broken/sticking piston ring or piston/cylinder. That high oil loss you mention seems severe. A problem with a piston/ring/cylinder can allow the compression to leak past the rings/piston into the engine oil sump and pressurise it. Under pressure, the oil will try and leak to atmosphere from anywhere it can.

A blue smoky exhaust is also an indication of piston/ring problems. A quick check is to start the car. If there's a cloud of blue smoke at start up which clears quickly, it's like to be worn valve guides. If, when driving the car with a warm engine there's blue smoke on acceleration - it points to a problem with rings/piston.

A quick check is to remove the spark plugs. Is there engine oil on one or more of them? An oiled up plug indicates that the engine oil is finding its way up past the rings/piston - and if oil can find its way up to a spark plug, then exhaust gasses/compressed fuel/air can find its way into the engine oil sump and pressurise it.

Another quick check is to start the engine and remove the oil dipstick. If fumes are 'chugging' out of the tube or oil is spitting out, that's another sure-fire sign that the oil sump is becoming pressurised due to a piston ring/piston/cylinder problem.

If you possess or can borrow an engine compression tester there is a further test you can do yourself to confirm whether or not there are piston/ring problems. Basically, a compression tester is just a gauge that screws into the cylinder head in place of the spark plug.

Warm the engine for 5 minutes so that the pistons expand fully in the bores.
Remove the spark plugs
Fit the compression tester into No1 cylinder and crank the engine for 10 seconds. Make a note of the compression reading on the gauge.
Do the same for each cylinder.

Here's an example of what you might find (the figures are for example only)
Cylinder Reading
1 115
2 120
3 118
4 95
5 96
6 117

Figures vary, but there should not be more than a 10% difference between the readings.
In the example above you can see that cylinders 4 and 5 have readings that are well below those of the other cylinders. This is indicating problems within those two cylinders. The lower compression could be due to a head/gasket fault or piston ring/piston problem. A split or worn exhaust valve in the head may cause low compression, a misfire and uneven running but it won't cause the engine oil sump/crankcase to pressurise. Now, some fine tuning to locate the exact problem:

Put a liberal squirt of oil into each cylinder - something like Redex, WD40 or engine oil.Put a cloth over each spark plug hole and spin the engine to get rid of the excess oil. The idea is that the oil you have squirted into the piston bores will form a 'seal' around the outside of the piston/rings.

Do the compression tests again and note the readings. If the readings go up significantly it indicates that the rings/pistons/bore has a problem. Readings that go up significantly are due to the oil forming a seal around the piston which raises the compression whilst testing. Here's an example:Cylinder Reading on 1st test 2nd test
1 115 118
2 120 121
3 118 120
4 95 110 Significant rise - more than 10%
5 96 98
6 117 119

Ok .. all this means is that cylinder 4 has compression problems due to the rings/piston/bore. The 2nd compression reading (with the oil squirted in) is higher simply because the oil formed a seal. Cylinder number 5 still has a low reading which didn't increase significantly on the 2nd 'wet' (when oil is added) test. This suggests that the problem is an exhaust valve/head gasket/head problem.

If there had been no significant increase in the reading on number 4 cylinder, this would suggest valve/gasket head problem. Low readings on adjoining cylinders (and which don't increase with the 2nd compression 'wet' oil test) would indicate a faulty head gasket between those two cylinders.

I'll continue this article ... ran out of word space

Jun 24, 2008 | 1996 Volvo 960

Not finding what you are looking for?
1990 Toyota Celica Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...