Question about 1999 Ford Expedition

1 Answer

Window on passenger side of 1999 ford expedition will not come down. It sounds like the motor and mechanism still move up and down, but the window is off track. also, before this, the window would open and close, but very slowly and seemed to strain the motor of the door. also, how do i remove the inside door panel to get to the glass motor, etc

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 3,106 Answers

Call your local library and ask if they have online access to a shop manual. If so, go there and print out all the door trim fastener diagrams. Then print out the window regulator removal instructions and diagrams. If they don't have it, go to alldatadiy.com

Posted on Oct 17, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Benimur
  • 6966 Answers

SOURCE: 1999 ford expedition with a passenger, front window stuck in the down possition

Hi,

Initially, try to determine which fuse goes to the power window. Check and replace if necessary.

In brief for a temporary remedy just to have the window closed: remove the triangular cover at the top front of the door behind the mirror, there should be a screw there; remove the trim around the door handle another screw, remove the cover of the courtesy light at the bottom of the door, there is another screw behind that; soon as all the screws are out, lift/push up on the door panel and pull off. This would grant you access to the mechanism controlling the window. You can try closing by manually turning the motor.

Thereafter, pls determine if it is the motor or the switch(es) has failed. Replacements are available here.

Incidentally, here is a nice tutorial on repairs of power windows in general.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on May 31, 2008

Tech Jenkins
  • 359 Answers

SOURCE: 2001 malibu rear driverside window off track

Just take a phillips screw driver, and a good sturdy putty knife, and your fingers, and just pry the plastic away from the metal of the door...

Open the door first, and where the inside door handle there should be 1 or 2 screws, and one near where the handle is to open the door from the inside. Take these out first before attempting to pry off the door panel. The panel is held onto the door by plastic snaps shaped like an enlongagted tooth.

Use COMMON SENSE AND BE GENTLE YET FIRM....

Don't be surprised if you have to get a whole new window motor assembly, alot of times they come as one assembly and seperate parts do not exist. Good Luck!!

Posted on Aug 29, 2008

CRTN
  • 716 Answers

SOURCE: GLASS OFF TRACK FOR FORD EXPEDITION 1999 DRIVER SIDE

You Will Have To Remove The Door Panel And Put It Back In The Track.

Posted on Jan 06, 2009

chuck943
  • 783 Answers

SOURCE: My power window came off track

There are 2 screws just above the door handle you need to remove. Remove the plastic trim around door handle. Then starting at bottom of door panel pull out to disengage the push pin clips and work your way up both sides of panel. Then lift up on door panel to disengage the weatherstip on top of panel.

Posted on Feb 10, 2009

lilward5
  • 5 Answers

SOURCE: how to remove front driver side door panel (2000 ford expedition)

There is a triangular piece, at top corner, covering a screw behind the mirror. Remove that screw. Remove the piece that covers the handle and remove the screw holding the handle to the door. Look through, where door handle was and remove another screw just above where the handle was. This screw is holding the panel to the actual door. Pop the cover off for the automatic door locks and disconnect them. Lift the panel in an upward direction.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All of my power windows stopped working


Sounds to me like he disconnected something when he was working and didn't connect it back. Under the driver side dash is where the main wires come in for all the electrical components. The main for the windows and door locks is coming down from the driver door and could be disconnected there. all the fuses that work those are under the hood and not inside the car. Let me know what you find out.

Jul 22, 2012 | 1999 Ford Expedition

1 Answer

1999 Ford Expedition, After putting driver's side window up and down this morning, this afternoon it won't go down. Does the window have a fuse that might need to be replaced?


Do you hear any noise when you activate the switch? If no, then the switch itself has gone bad or the electric motor is drawing too many amps to work. Remove the door panel and check the connector at the motor for power when you move the switch. If power, then the motor is bad.

Sep 24, 2010 | Ford Expedition Cars & Trucks

1 Answer

The passenger side window is down and won't come back up using either side button.


if the fuse is good, it sounds like the regulator (motor) have someone actuate the switch while you pull up on the window, it may be stuck.

Nov 16, 2009 | 2000 Ford Expedition

1 Answer

Rear passenger window on my 2003 ford expedition


replace the window mechanism on that door

Oct 12, 2009 | 2003 Ford Expedition

3 Answers

Passenger window will not go up i think its


if the fuse was an issue then all the windows would be inop, not just one, the most common fault is the electric motor that runs the window up and down.

Oct 03, 2009 | 2003 Ford Expedition

1 Answer

Passenger side power window


it could be but lets start with the obvious
the switch
the fuse
burnt up wireing in side window
bad ground

Jun 10, 2008 | 1998 Ford Expedition

1 Answer

1999 ford expedition with a passenger, front window stuck in the down possition


Hi,

Initially, try to determine which fuse goes to the power window. Check and replace if necessary.

In brief for a temporary remedy just to have the window closed: remove the triangular cover at the top front of the door behind the mirror, there should be a screw there; remove the trim around the door handle another screw, remove the cover of the courtesy light at the bottom of the door, there is another screw behind that; soon as all the screws are out, lift/push up on the door panel and pull off. This would grant you access to the mechanism controlling the window. You can try closing by manually turning the motor.

Thereafter, pls determine if it is the motor or the switch(es) has failed. Replacements are available here.

Incidentally, here is a nice tutorial on repairs of power windows in general.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

May 31, 2008 | 1999 Ford Expedition

Not finding what you are looking for?
1999 Ford Expedition Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81294 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...