- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not sure what you mean when you say complete diagram but below is the wiring diagram for the headlights only. Other than a possible problem in the switch itself, the only common thing I see is both headlughts have the same ground location. In the last picture I have put an arrow as to the location of that ground which you may want to clean and see if that takes care of it. Hope this helps....
5w30. the oil filter is a paper filter located inside an aluminum housing. you must remove the small access panel just ahead of the oil pan to access the filter. you will nee a special wrench to remove the aluminim housing to access the filter.
REPLACEMENT
The hazard flasher is located forward of the console on all N-Body vehicles. The turn signal flasher is located behind the instrument panel, on the left side of the steering column bracket. Replace the flasher by unplugging the old one and plugging in the new one. Confirm proper flasher operation.
The flasher is located behind the dash (trim removed for clarity)
Hi,Im certain the VSS ecu is located behind the passenger glovebox,Incidently did you know you nee a matching ecu & key fob,alternativly you will need to have unmatching pairs married via Tech 2.
Well one would need to know what you are looking for...
×