Question about 1999 Hyundai Sonata

Open Question

Auto get stuck in third, won't kick down but wil get 2nd manualy

2001 modle V6 will get normal operation until it warms up. fluid never been change, new external filter no loss of fluid. you can be driving along at 70mph and it will crash into 3rd and it will stay there until the ignition is turned off. New speed sensor and selector switch fited, it was ok for 5 days. Engine light on.

Posted by on

  • thomas tysiak May 11, 2010

    you need to get the code pulled from the computer it will give a lot more insight on what to do next

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
maklean
  • 1665 Answers

SOURCE: hyundai santa fe 2001

p0715 > A/T input speed sensor circuite05139a.jpg 1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage. 2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. P1729>This DTC code is related to the EMC and is set If EMS harness has an open battery source addcfc2.jpg 1. Ignition OFF 2. M54 Electric Magnet Valve Clutch connector : Disconnect. 3. Measure resistance between 1 & 2. A. Specification : Approx. 1.8 ~ 2.2 Ωc7c6e73.gif The above value is only for reference. The data from vehicle may differ from it according as various vehicle condition. This inspection is for checking open or short of EMC coil.

Posted on Jun 16, 2008

Ad
Ajkill
  • 2035 Answers

SOURCE: hyundai santa fe 2001

Car error codes::


Diagnostic Trouble Code Storage Condition Remedy
P0100 Mass Air Flow Sensor Voltage High C-8
P0100 Mass Air Flow Sensor Voltage Low C-8
P0110 Intake Air Temperature Voltage High C-10
P0110 Intake Air Temperature Voltage Low C-10
P0115 Coolant Temperature Voltage High C-9
P0115 Coolant Temperature Voltage Low C-9
P0120 Throttle Position Sensor (TPS) Voltage High C-7
P0120 Throttle Position Sensor (TPS) Voltage Low C-7
P0130 O2 Sensor 1 Circuit Voltage High C-30
P0130 O2 Sensor 1 Circuit Voltage Low C-30
P0130 O2 Sensor 1 Open Circuit C-30
P0150 O2 Sensor 2 Circuit Voltage High C-31
P0150 O2 Sensor 2 Circuit Voltage Low C-31
P0150 O2 Sensor 2 Open Circuit C-31
P0201 Injector Valve 1 Voltage High C-20
P0201 Injector Valve 1 Voltage Low C-20
P0201 Injector Valve 1 Open Circuit C-20
P0202 Injector Valve 2 Voltage High C-21
P0202 Injector Valve 2 Voltage Low C-21
P0202 Injector Valve 2 Open Circuit C-21
P0203 Injector Valve 3 Voltage High C-22
P0203 Injector Valve 3 Voltage Low C-22
P0203 Injector Valve 3 Open Circuit C-22
P0204 Injector Valve 4 Voltage High C-23
P0204 Injector Valve 4 Voltage Low C-23
P0204 Injector Valve 4 Open Circuit C-23
P0205 Injector Valve 5 Voltage High C-24
P0205 Injector Valve 5 Voltage Low C-24
P0205 Injector Valve 5 Open Circuit C-24
P0206 Injector Valve 6 Voltage High C-25
P0206 Injector Valve 6 Voltage Low C-25
P0206 Injector Valve 6 Open Circuit C-25
P0230 Fuel Pump Relay Voltage High C-6
P0230 Fuel Pump Relay Voltage Low C-6
P0230 Fuel Pump Relay Open Circuit C-6
P0325 Knock Signal Circuit 1 C-26
P0330 Knock Signal Circuit 2 C-26
P0335 No Engine RPM Signal C-32
P0335 Incorrect RPM Signal C-32
P0340 Hall Sensor Voltage High C-15
P0340 Hall Sensor Voltage Low C-15
P0403 EGR Valve Voltage High C-28
P0403 EGR Valve Voltage Low C-28
P0403 EGR Valve Open Circuit C-28
P0410 Secondary Air Pump Voltage High C-27
P0410 Secondary Air Pump Voltage Low C-27
P0443 Fuel Tank Ventilation Valve Voltage High C-29
P0443 Fuel Tank Ventilation Valve Voltage Low C-29
P0443 Fuel Tank Ventilation Open Circuit C-29
P0500 Vehicle Speed Signal C-42
P0505 Idle Air Control Voltage High C-33
P0505 Idle Air Control Voltage Low C-33
P0550 Power Steering Voltage High C-14
P0550 Power Steering Voltage Low C-14
P0560 Battery Voltage High C-4
P0560 Battery Voltage Low C-4
P0602 Control Module Programming Error C-2
P1110 Intake Manifold Valve 1 Voltage High C-34
P1110 Intake Manifold Valve 1 Voltage Low C-34
P1111 Intake Manifold Valve 2 Voltage High C-35
P1111 Intake Manifold Valve 2 Voltage Low C-35
P1230 Power Supply Relay Secondary Circuit C-3
P1405 EGR Valve Feedb. Voltage High C-28
P1405 EGR Valve Feedb. Voltage Low C-28
P1405 EGR Valve Feedb. Incorrect Signal C-28
P1501 Immobiliser No or Wrong Coding C-5
P1502 Immobiliser No Signal C-5
P1503 Immobiliser Wrong Signal C-5
P1530 A/C Relay Voltage High C-41
P1530 A/C Relay Voltage Low C-41
P1600 Reprogram or Replace Electronic Control Unit (ECU) C-2
P1602 Knock Control Module; Replace ECU C-2
P1690 Check Light Voltage High C-43
P1690 Check Light Voltage Low C-43
P1690 Check Light Open Circuit C-43
P1740 Torque Control Voltage Low C-40
P1740 Continuous Torque Control C-40

These are the error codes:

Posted on Jul 08, 2008

  • 1 Answer

SOURCE: 2001 Hyundai Santa Fe - Engine Code P1602, stuck in gear

Im having the same problem with my 02 Santa Fe. How do i go about fixing this problem? And is it costly? Please help

Posted on Jan 31, 2010

  • 11 Answers

SOURCE: 2001 kia optima v6 ... i think my speed sensor may

I think this car has a torque converter lock up. sometimes they freeze up when the the pcm makes 1:1 to the motor and transmission. this could be the shifting problem.

Posted on Apr 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have a 98 Windstar that recently began having transmission problems. When we first drive it starts out fine but once we've driven several miles it will get stuck in 2nd gear.


The switches inside need to be replaced they are hanging up do this now before you ruin the clutches it will go back to normal shifting and work fine change all pressure torque lockup and shift switches diy for about 125.00 with fluid filter cost and back to normal shifting and a happy van and crew make sure vans not running hot burning fluid otherwise will happen again high temp burned fluid damages switches ability to work

Sep 04, 2017 | 2001 Ford Windstar

1 Answer

My 2001 montana won't shift into Drive and the oil is bubbling on the dipstick


bubbling or foamy? Make sure the van is parked level and warmed up. Check the fluid level and add as necessary.

Feb 02, 2013 | Pontiac Montana Cars & Trucks

1 Answer

Automatic transmission has some buzz noise (like bee noise) when idle and when drives. Does not change gears (only 1st and 2nd no 3rd and 4th) Sometimes it changes through all gears. No problem in revers...


It sounds like clogged ports that allow fluid to go through. Reverse will most always work even when the entire tranny goes since it is it's own separate system. Try a flush, I don't normally advise that but it sounds like the way to go but I'm guessing a new tranny is in the very near future. Did you keep up on the fluid changes? Because those trannys in those mazdas usually go for a good 300k if kept up with maintenance.

Jan 06, 2018 | 1994 Mazda 929

1 Answer

Hillo my name is victor i have a 2001 concorde and im having troble with tran it is not shifting properly sometime it shift normal and sometime is stay stuck in 1st gear sometime shift to 2nd and stay...


try checking fluid level, could be bad governer, but more likley clutches or bands ,or drums try to go through gears manualy in these newer cars the valve body is all operated by computers,You will probably need to take it to have it pulled and rebuilt, i assume it has over 80k miles

Apr 18, 2010 | 1999 Chrysler Concorde

1 Answer

2001 Toyota Tacoma Xtracab with 1st-2nd shifting problem


if it has a kick down cable that could be the problem look for a cable running from throttle to trans that can be adjusted in length

Sep 24, 2009 | 2001 Toyota Tacoma

1 Answer

Shifting Problem Auto Tranny


You are going to need the transmission rebuilt.

Jul 06, 2017 | 1994 Volkswagen Passat

1 Answer

Transmission


try servicing ur trans. by changing the fluid and filter

Jun 20, 2008 | 1999 Daewoo Leganza

Not finding what you are looking for?
1999 Hyundai Sonata Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8825 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...