Question about 2006 Chrysler PT Cruiser

1 Answer

Tail lights and brake lights out. i cannot figure out which fuse to replace, if that is even the problem.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 244 Answers

If you have found the fuse holder, each fuse socket should have an imprint of what the fuse is for. look for brake/tail, or something similar. remove the flat, color-coded fuse and hold it up so you can see the internal elements. there's a little s shaped part between 2 upright flat parts that are extensions of the 'plug in' connectors that connect the fuse to the fuse holder- if you see a gap (melted section) in this s looking section, then the fuse is 'blown', and will need replacing. use the same colored fuse to replace it! if it fails again quickly, then there's probably a short in your light fixtures or wiring somewhere in the circuit!get online and check for any recalls for your year and model!
good luck!

Posted on Sep 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The brakes lights don't work. can't tell which fuse to replace, manual does not explain well enough


You have a high mount brake light. Press the brake pedal. If it doesn't come on, replace the brake switch at the brake pedal. If it does come on and the tail lights don't, replace the turn signal switch.

Sep 24, 2016 | 2006 Hyundai Tucson

1 Answer

Break lights and tail lights will not come on. Both sides. I replaced the bulb.


Brake light fuses should be in the "fuse box" under the hood.

Aug 28, 2015 | 2002 Jaguar X-Type

1 Answer

Both tail lights don't work turn signal and back up lights work but no stop light and no tail lights


could be a glitch in the front power controll modual disconect the battery wait couple minuts reconect and see if thay come back
also replace the bulbs even the one on the cab your therd brake light alot of ppl dont relise its out and it will help determin if its in the tail lights or its in the brake switch if the therd brake light lights and the tails dont replcae the switch after inspecting the tail light conectores for corotion

Mar 11, 2014 | 2005 Dodge Ram

1 Answer

Brake light dont work. 2006 chevy truck, 4.8L 2wd


Some of these had two fuses for brake lights. One for the top/center stop lamp and another for the rear left and right brake lights. Usually one said "stop" and the other said "brake" and one was in the underhood panel while the other was in the dash fuse panel. It's not uncommon to blow a brake light fuse [LR and RR] if you tow a trailer but some of these had seperate fuses for the trailer lights also. If you have a test light check both sides of the two fuses for power [ignition key on] while stepping on the brakes. It should at lest narrow your search a bit.

Jun 08, 2010 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

My tail lights are out. I even replaced with new bulbs. Brake Lights go on only when brake is applied


Have you check your fuses ? There is a tail light fuse. you will find fuse information in your owners manual.

Oct 05, 2009 | 2006 Toyota Corolla

1 Answer

I have a 1991 Accord. Brake Light is not lighted up


Look for a Bad Ground wire connection that Links the Tail Light and Trunk Light.
Regards, DT

Aug 28, 2009 | 1991 Honda Accord

1 Answer

1994 Camry - Brake Lights Work, Tail Lights Wont


Well Jennifer, it sounds like you've done all the things that I'd have done. Try for a bad ground next. Do the lights in the dash cluster work? They're wired together with the tail-lights (so that you know if the rears go out). There should be a ground wire somewhere connecting the body to the engine or chassis.Look around the rear of the engine bay. Good Luck.

Jun 10, 2009 | 1994 Toyota Camry

1 Answer

Tail lghts/brake lights


Isn't that mysterious? It took me a few weeks to figure it out. Look carefully under the break pedal. There is this device called a "break light switch". I hope that helps.

Feb 03, 2009 | 1992 Honda Accord

Not finding what you are looking for?
2006 Chrysler PT Cruiser Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...