Question about Cars & Trucks

1 Answer

1999 pontaic Grand am head bolt long and short bolts

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,852 Answers

What about them? What do you want to know? If you have a question, ASK IT

Posted on Oct 09, 2019

  • Jeffery belk Oct 09, 2019

    How does the bolts go on the 3.4 l head

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
justuscc
  • 360 Answers

SOURCE: chevy 5.7 17 bolt heads tork specs

Cylinder Head Bolt (Preferred Method) All Bolts First Pass in Sequence 22 ft.lb Long Bolt Final Pass in Sequence 75 deg. Medium Bolt Final Pass in Sequence 65 deg Short Bolt Final Pass in Sequence 55 deg. Cylinder Head Bolt (Optional On-Vehicle Strategy) First Pass in Sequence 26 ft.lb Second Pass in Sequence 44 ft.lb Final Pass in Sequence 66 ft.lb

Posted on Oct 13, 2008

  • 512 Answers

SOURCE: Head Bolt Torque for a 2000 Grand Cherokee Laredo 4.0L

the torque is a 4 step process

1 torque all bolts to 22 ft/lbs
2 torque all bolts to 45 ft/lbs
3 recheck all bolts to 45 ft/lbs
4 torque bolts 1 thru 10 to 110 ft/lbs
bolt 11 to 100 ft/lbs
bolts 12 thru 14 to 110 ft/lbs
bolt #1 is the fourth bolt from the front on the passenger side....#2 is the fourth bolt on the drivers side then you continue in a clockwise order

Posted on Jan 04, 2009

  • 379 Answers

SOURCE: what are the torque specs for the head bolts for a 1999 sportage

hi bob
head torque on the 2.0 DOHC is 64 ft lbs , done in two -three steps , also there is a sequence for proper order . here is a very good description with graphics .

1999 kia sportage 2.0 DOHC head torque

Thanks for using FIX YA !

J5

Posted on Jan 24, 2009

ZJLimited
  • 17970 Answers

SOURCE: need the head bolt torque specs for a 1999 grand

Fig. Cylinder head bolt tightening sequence-3.1L engines & 2001-04 3.4L engines

7245611.jpg


Fig. Cylinder head bolt tightening sequence-2005 3.4L engines

5579e52.jpg

Hope this help (remember rated and comment this).

Posted on Mar 30, 2010

emissionwiz
  • 85206 Answers

SOURCE: cylinder head tightening sequence for ford mondeo 1.8i zetec petrol

Go to this LINK for the info in pdf format, the sequence is on page 16 of the pdf file.

Posted on Feb 16, 2012

Testimonial: "Great help...just the info I needed to do job. Thankyou very much."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Jeep Grand cherokee Limited, 5.9 liter torque setting for head bolts


posted the fsm
5.9L, 1999 WJ?
check alldata.com.... it covers this engine,
buy my WJ, fsm skips the 5.9L, not sure why.
ah only the limited has that. engine.
my online links show no 5.9L. so see why you are asking here.
why not go to real jeep forum and ask.

here are the (what else) questions
are they TTY?
are the reusable.?
are the angle set.?
what is the pattern ? Sequence.
and staging levels .? (about 1./3 steps is ok)
those are always a question. and the FSM answers them all.
for your car.

if the expensive WJ (limited) FSM is too pricey, (it is)
then ask here.
http://www.jeepforum.com/forum/f310/

one search, you can too, or better ask them.

http://www.jeepforum.com/forum/f13/5-9-limited-top-end-rebuild-1309601/


the intake is TTY bolts.
not head, heads are 2 times, bolts. lol.

im not sure what book covers the 5.9L, it might be a supplement.
ask jeep for best advice, there.
http://www.ebay.com/itm/1999-Jeep-Grand-Cherokee-Factory-Shop-Service-Manual-/281798487608?hash=item419c7fae38&vxp=mtr

Sep 16, 2015 | Jeep Cars & Trucks

1 Answer

On a '06 Pontaic Gran Prix - I cannot get the bottom right bolt out to remove water pump. How do i move idler pulley?


To get that last bolt out you need to move the power steering pump out of the way. Just remove the two bolts holding the PS pump and push it aside. You don't have to remove the pump hoses you just need to move it an inch towards the firewall.

Apr 09, 2014 | 2006 Pontiac Grand Prix

1 Answer

Need torque spec's for 1999 Grand Am 2.4L motor valve pan gaskets bolts? thanks


I need know the torque head Pontiac Grand am se 1999. Machine 2.4

Mar 24, 2012 | 1999 Pontiac Grand Am GT

1 Answer

1999 grand am gt 3.4 head torque


requires new head bolts. also requires thread sealant to be applied to bolts because they go into coolant passages. The torque spec is 60 n.m (44 lb ft) and then and additional 95 degrees. It suggests using a torque angle meter however its just slightly more than one-quarter turn the sequence is as follows. 5 3 2 8
7 1 4 6

May 25, 2011 | 1999 Pontiac Grand Am GT

1 Answer

I need to know the torque specs for the head gasket for a 99 2.2 pontiac sunfire


Install cylinder head bolts finger-tight. New cylinder head bolts are recommended due to stretch of the old bolts.
Tighten bolts in sequence, tighten the long bolts to 46 ft. lbs. (63 Nm) plue 90 degrees. Tighten the short bolts to 43 ft. lbs. (58 Nm)


Install pushrode and rocker arms and rocker arm nuts. Tighten nuts to 22 ft. lbs. (30 Nm).


Install valve cover and tighten bolts to 89 inch lbs. (10 Nm).

Apr 05, 2011 | 1999 Pontiac Sunfire

4 Answers

Need the head bolt torque specs for a 1999 grand am - i am trying to replace the heads on 1999 grand am with 3.4 engine


Fig. Cylinder head bolt tightening sequence-3.1L engines & 2001-04 3.4L engines

7245611.jpg


Fig. Cylinder head bolt tightening sequence-2005 3.4L engines

5579e52.jpg

Hope this help (remember rated and comment this).

Mar 30, 2010 | 1999 Pontiac Grand Am GT

2 Answers

What is the tension on cylinder head bolts for a jeep grand cherokee 307935 4 litre, 6 cylinder, 1999, petrol motor.


Coat threads of left hand front bolt with sealant: 1st - step; - 22 ft./lbs. 2nd - step; - 45 ft./lbs. 3rd - step, all bolts except L.H. front bolt; - 110 ft./lbs. 4th - step, L.H. front bolt; - 100 ft./lbs. fig100.png

Sep 05, 2009 | 1999 Jeep Grand Cherokee

1 Answer

I'm trying to find out what the torque is on the cylinder heads for a 3.4 pontiac grand am 99


1st u must use all new head bolts, that said follow this factory procedure from the manual.
HEAD BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE SEQUENCE --------- | 6 2 3 7 | | 5 1 4 8 | --------- STEP 1: TORQUE IN SEQUENCE TO 33 FT/LBS STEP 2: TURN AN ADDITIONAL 90 DEGREES RECHECK FINAL TORQUE IN SEQUENCE *** CAUTION *** ENGINE USES TORQUE TO YIELD HEAD BOLTS (TTY) THAT PERMANENTLY STRETCH DURING THE INITIAL INSTALLATION. NEW HEAD BOLTS MUST BE USED WHEN CYLINDER HEAD IS REPLACED OR RE-INSTALLED TO OBTAIN PROPER TORQUE. ALWAYS COAT BOLT THREADS WITH THE PROPER SEALANT

Feb 20, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Tightening head


New Headbolts are recommended

Long bolts are torqued to 46'lbs + 90 degrees.

Short bolts are torqued 43'lbs + 90 degrees.

Start in the center, and work to the edges, torquing the bolts in two stages.

Rockers are torqued to 22'lbs.

Dec 21, 2008 | 1999 Chevrolet Cavalier

4 Answers

Chevy 5.7 17 bolt heads tork specs


Cylinder Head Bolt (Preferred Method) All Bolts First Pass in Sequence 22 ft.lb Long Bolt Final Pass in Sequence 75 deg. Medium Bolt Final Pass in Sequence 65 deg Short Bolt Final Pass in Sequence 55 deg. Cylinder Head Bolt (Optional On-Vehicle Strategy) First Pass in Sequence 26 ft.lb Second Pass in Sequence 44 ft.lb Final Pass in Sequence 66 ft.lb

Oct 13, 2008 | 1999 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22408 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...