Question about Chrysler Cars & Trucks

1 Answer

2012 Chrysler 300 - where is the Heater Core Temperature Sensor exactly located?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 327 Answers

Mat what exactly are you pertaining too when you say heater core temp.sensor?
The heat is controlled by the water control valve and how much hot water it allows to go three the core. Unless your talking about having digital climate control?

Posted on Sep 11, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 33 Answers

SOURCE: how do i fix heater core on a 2006 chrysler 300

If you're getting hot air, it's not the heater core.

Windows fog up because the humidity level inside the vehicle increases while the temperature of the windows decreases to a point where the dew point of the air is higher than the temperature of the glass. When this happens, moisture from the air condenses onto the glass. When you breath out, you increase the humidity of the air in the car because of the moisture in your breath.

The key for defrost to work isn't necessarily heat, it's more important to dry the air. There are two ways of doing this:

1.) Make sure you have the air recirculation turned off. This feature causes your car to recirculate air from inside the car through the air ducts. In the summer when it's hot and humid outside, this is what you want. However in the winter when the air is dry, you want to bringing fresh dry air from outside to replace the humid air inside the car.

2.) Turn on the A/C compressor. This will cool the air before it passes through the heater core. Cooling air removes moisture. This is why your car drips water from underneath in the summertime when you run the A/C. It is literally removing moisture from the air.

However, if your heater isn't working (blowing cold air even when on the warmest setting), then you may have a different problem.

Posted on Feb 15, 2009

  • 184 Answers

SOURCE: BANK 2 SENSOR 1 WHERE IS IT LOCATED ON 02 CHRYSLER 300 M

That sensor is the one between the exhaust manifold and the catalytic converter (sensor #1). Bank 2 is the side of the engine that cylinder #1 is NOT on. Here is a diagram showing cylinder #1.

6468c66.gif

FYI, sensor #2 is the one behind (downstream) the catalytic converter.

Posted on Mar 25, 2009

  • 2 Answers

SOURCE: cooling fan switch/or sensor

The Coolant temp Sensor is located right under the top radiator hose (on the engine side), with a little black connector!, You might have to remove th etop hose to get to it with a deep socket and extension!.
Also Dont Forget to blled the coolant system by the bleeder valve uptop right near/above the coolant sensor!.(10MM Mini socket w/ extension IIRC!)

Posted on Sep 28, 2009

taran_2005
  • 10515 Answers

SOURCE: 2005 Chrysler 300 thermostat location?

Hi,

In your Model :-

The automotive thermostat is a temperature controlled on and off valve. When the temperature rises to a predetermined temperature, the thermostat opens up to allow the engine coolant to flow through the cylinder block and the radiator. This flow is crucial to maintain optimum operating temperature for fuel efficiency, enhanced driveability, and engine protection. The coolant flow is reduced when the engine is cold, and the flow is increased when the engine is hot. Contrary to popular opinion, operating the vehicle without the thermostat doesn't make the engine run cooler. It will actually run hotter because there isn't a thermostat to slow the coolant flow. This means the coolant doesn't stay in the radiator long enough to dissipate its heat.

TO TEST THERMOSTAT

There are several ways to test the opening temperature of a thermostat.
One method does not require that the thermostat be removed from the engine.

  • Remove the radiator pressure cap from a cool radiator and insert a thermometer into the coolant.
  • Start the engine and let it warm up. Watch the thermometer and the surface of the coolant.
  • When the coolant begins to flow, this indicates the thermostat has started to open.
  • The reading on the thermometer indicates the opening temperature of the thermostat.
  • If the engine is cold and coolant circulates, this indicates the thermostat is stuck open and must be replaced.
The other way to test a thermostat is to remove it.
  • Suspend the thermostat completely submerged in a small container of water so it does not touch the bottom.
  • Place a thermometer in the water so it does not touch the container and only measures water temperature.
  • Heat the water.
  • When the thermostat valve barely begins to open, read the thermometer. This is the opening temperature of this particular thermostat.
  • If the valve stays open after the thermostat is removed from the water, the thermostat is defective and must be replaced.
  • Several types of commercial testers are available. When using such a tester, be sure to follow the manufacturer's instructions.
  • Markings on the thermostat normally indicate which end should face toward the radiator. Regardless of the markings, the sensored end must always be installed toward the engine.
  • When replacing the thermostat, also replace the gasket that seals the thermostat in place and is positioned between the water outlet casting and the engine block.
4fa3f4e.jpg


Positioning a thermostat into an engine.
  • Generally, these gaskets are made of a composition fiber material and are die-cut to match the thermostat opening and mounting bolt configuration of the water outlet.
  • Thermostat gaskets generally come with or without an adhesive backing. The adhesive backing of gaskets holds the thermostat securely centered in the mounting flange, leaving both hands of the technician free to align and bolt the thermostat securely in place.

TO REPLACE THERMOSTAT

CAUTION
If the radiator is filled to the top with coolant and the engine is run without the radiator cap in place, the coolant will expand and spill over as the engine warms up.
  • Drain some coolant into a clean container until the coolant level is below the thermostat housing.
  • Remove the upper radiator hose connection from the thermostat housing.
  • Loosen the housing bolts and remove the housing.
  • Remove the gasket and scrape it carefully from the surface of the housing and the mounting surface on the engine. If the gasket remains on either of the surfaces, there will probably bea coolant leak after reassembly. Some engines use a rubber O-ring to seal a thermostat housing.
  • Compare the size of the thermostat to the old one. They are of different sizes, types, and temperature ratings.
  • The temperature rating is stamped on the sensing bulb on the bottom of the thermostat. The temperature bulb faces the block.
  • When replacing a thermostat, be sure that the thermostat fits into the groove in the block or outlet housing. If the thermostat is installed upside down, the engine will overheat.
  • Install the gasket.
  • Reinstall the thermostat housing. Refill the system and run the engine or pressure test to check for leaks.
  • When the engine has reached operating temperature make sure the thermostat opens.
  • You should be able to see coolant circulating within the radiator.
  • Another way of checking thermostat operation is to feel the top of the radiator hose or use a thermometer or multimeter with a temperature probe to confirm that the coolant is warming up.
  • If the engine is overheating, but the top hose is still cool to the touch, the thermostat is stuck closed and must be replaced.
NOTE When a paper gasket is used and the recess is in the thermostat housing, it is a good practice to position the thermostat into the recess and glue the gasket to hold it in place. If it falls out of its groove during installation, the outlet housing can be cracked or a coolant leak will result. Before tightening the water outlet housing, try to rock it back and forth to be sure it is flush. Housings are often cracked during this step.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!



Posted on Oct 07, 2009

emissionwiz
  • 85161 Answers

SOURCE: where is the heater core located exactly in a 95

it is behind the glove box and very easy to replace, just disconnect the heater core hoses on the fire wall, remove the plastic cover over the core and out it comes, I have replaced them in 30 minutes at the Ford dealer i work at.

Posted on Nov 17, 2009

Testimonial: "i appreciate the prompt response. sounds like a quick fix . thanks again!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a chrysler 300 2005 the heater is blowing out cold air what should i do


Install a back flush kit on one of the heater core hoses to see if you can get any rust out of the core. Chech both heater hoses for the same temperature with the heater on and the engine up to normal temperature. Both hoses should be the same temperature when touched. If one is colder than the other, that indicates no or severely restricted. If both are the same temperature, then the blend door is most likely not operating.

Dec 12, 2016 | 2005 Chrysler 300

1 Answer

The heater in my 2014 Chrysler 300C is blowing cold air


check that control module is activating the heater controls (tap)
check for sufficient coolant in the system
check for air lock in the system preventing coolant from circulating through the heater core
check for blocked heater core

Nov 30, 2016 | 2014 Chrysler 300

2 Answers

Coolant boiling in resevoir.


It can be faulty coolant temperature sensor.Its not sensing exact coolant heat temperature so its overheating then required level.

-----------

Get the coolant pressure tested, its definitely leaking coolant. You will need to get the coolant running line.


Pressure test will help you to know from where exactly coolant/refrigerant is getting leaked.

===========

For complete step by step troubleshooting i suggest you to go through the help links mentioned below :----

Click the link below :-----


Coolant enters in transmission on Toyota Land cruiser?

http://schematicsdiagram.blogspot.com/2012/01/coolant-enters-in-transmission-on.html

--------------

1991 Toyota Camry: Order Coolant Bypass Tube?

http://whatisbyme.blogspot.in/2012/05/1991-toyota-camry-order-coolant-bypass.html

-------------

2002 Toyota Camry: Puff of Blue or White Smoke while Starting?

http://whatisbyme.blogspot.in/2012/05/2002-toyota-camry-puff-of-blue-or-white.html

----------------

1994 Toyota Camry: Coolant Leak?

http://technoanswers.blogspot.in/2012/04/1994-toyota-camry-coolant-leak.html

----------

2006 Cadillac DTS: COOLANT LEAK AT DRIVER SIDE NEAR FIREWALL?

http://schematicsdiagram.blogspot.in/2012/04/2006-cadillac-dts-coolant-leak-at.html

----------

MAF, IAT, MAP and Coolant Level Sensor problem all together on Mazda MPV?

http://schematicsdiagram.blogspot.com/2011/12/maf-iat-map-and-coolant-level-sensor.html

---------------

GMC Engine Coolant Temperature (ECT) Sensor Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-engine-coolant-temperature-ect.html

------------

Loosing Coolant?

http://whoisbyme.blogspot.in/2012/06/loosing-coolant.html

---------------

Coolant temperature sensor dies again and again?

http://schematicsdiagram.blogspot.com/2012/01/coolant-temperature-sensor-dies-again.html

------------

2000 Daewoo Lanos: Where to Add Coolant?

http://repairhelpcenter.blogspot.in/2012/06/2000-daewoo-lanos-where-to-add-coolant.html

Blue Water Warning Light on Dash?

http://whatisbyme.blogspot.in/2012/07/blue-water-warning-light-on-dash.html

---------------

Replacing Oldsmobile Engine coolant sensor?

--------------

How to test Engine coolant temperature sensor?

------------------

Replace Coolant Sensor Module on Oldsmobile?

-----------

These details will help.

Thanks.

Nov 28, 2012 | 1996 Lexus GS 300

1 Answer

Gs300 coolant is bubbling in resevoir,but temp is fine ?


Get coolant temp sensor checked.

Get the coolant pressure tested, its definitely leaking coolant. You will need to get the coolant running line.


Pressure test will help you to know from where exactly coolant/refrigerant is getting leaked.

===========

For complete step by step troubleshooting i suggest you to go through the help links mentioned below :----

Click the link below :-----


Coolant enters in transmission on Toyota Land cruiser?

http://schematicsdiagram.blogspot.com/2012/01/coolant-enters-in-transmission-on.html

--------------

1991 Toyota Camry: Order Coolant Bypass Tube?

http://whatisbyme.blogspot.in/2012/05/1991-toyota-camry-order-coolant-bypass.html

-------------

2002 Toyota Camry: Puff of Blue or White Smoke while Starting?

http://whatisbyme.blogspot.in/2012/05/2002-toyota-camry-puff-of-blue-or-white.html

----------------

1994 Toyota Camry: Coolant Leak?

http://technoanswers.blogspot.in/2012/04/1994-toyota-camry-coolant-leak.html

----------

2006 Cadillac DTS: COOLANT LEAK AT DRIVER SIDE NEAR FIREWALL?

http://schematicsdiagram.blogspot.in/2012/04/2006-cadillac-dts-coolant-leak-at.html

----------

MAF, IAT, MAP and Coolant Level Sensor problem all together on Mazda MPV?

http://schematicsdiagram.blogspot.com/2011/12/maf-iat-map-and-coolant-level-sensor.html

---------------

GMC Engine Coolant Temperature (ECT) Sensor Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-engine-coolant-temperature-ect.html

------------

Loosing Coolant?

http://whoisbyme.blogspot.in/2012/06/loosing-coolant.html

---------------

Coolant temperature sensor dies again and again?

http://schematicsdiagram.blogspot.com/2012/01/coolant-temperature-sensor-dies-again.html

------------

2000 Daewoo Lanos: Where to Add Coolant?

http://repairhelpcenter.blogspot.in/2012/06/2000-daewoo-lanos-where-to-add-coolant.html

Blue Water Warning Light on Dash?

http://whatisbyme.blogspot.in/2012/07/blue-water-warning-light-on-dash.html

---------------

Replacing Oldsmobile Engine coolant sensor?

--------------

How to test Engine coolant temperature sensor?

------------------

Replace Coolant Sensor Module on Oldsmobile?

-----------

These details will help.

Thanks.

Nov 28, 2012 | 1994 Lexus GS 300

1 Answer

Guages not working,


If all voltages checked ok,then most probably its faulty instrument cluster board on which gauges are connected.Yes if cluster circuit board looks ok,then also it can be faulty.Somewhere there is minute short or burn on board then such prolem arises.
Also check the fuse box.One under hood and other under dash.Inspect each and every fuse and see if all are fine or not.
---------------For more troubleshooting on these cluster gauges i suggest you to refer the list of help links mentioned below.Its step by step instructions will help you to confirm the exact cause of problem in these conditions:---------
Click the link below:------

2004 Toyota Tundra: Oil Gauge and Temp Gauge Not Working?

http://howtobyme.blogspot.in/2012/05/2004-toyota-tundra-oil-gauge-and-temp.html

--------------

2005 Lexus SC430: Fuel Door, Dome light and Fuel Gauge Fuse Location?

http://howtobyme.blogspot.in/2012/05/2005-lexus-sc430-fuel-door-will-not.html
----------

Toyota 4Runner: Temperature Gauge Sensor

http://technoanswers.blogspot.in/2012/04/toyota-4runner-temperature-gauge-sensor.html
------------

Temperature gauge sits over half way mark?

http://schematicsdiagram.blogspot.in/2012/04/temperature-gauge-sits-over-half-way.html

---------------

Heater blows intermittently and temp gauge goes erratic?

http://technoanswers.blogspot.com/2012/01/heater-blows-intermittently-and-temp.html

----------

Temperature gauge does not move and no heat when heater is ON?

http://technoanswers.blogspot.com/2012/01/temperature-gauge-does-not-move-and-no.html

-----------

2003 Pontiac Grand Prix: Erratic Fuel Gauge?

http://technoanswers.blogspot.in/2012/06/2003-pontiac-grand-prix-erratic-fuel.html


-----------

Temperature gauge keeps fluctuating up and down close to red?

http://technoanswers.blogspot.com/2012/01/temperature-gauge-keeps-fluctuating-up.html


-------------

Temperature gauge on the dash quit working on Pontiac Grand Prix?

http://technoanswers.blogspot.com/2012/01/temperature-gauge-on-dash-quit-working.html

---------------

Fuel gauge jumps from empty to full?

http://schematicsdiagram.blogspot.com/2011/12/fuel-gauge-jumps-from-empty-to-full.html

--------------

Gas gauge stuck on empty on 2002 Mercedes Benz 240c?

http://repairhelpcenter.blogspot.in/2012/02/gas-gauge-stuck-on-empty-on-2002.html
---------------

Oldsmobile Temperature Gauge Lamp Switch?

-----------------


Fuel gauge drops to Empty?

http://technoanswers.blogspot.com/2012/01/fuel-gauge-drops-to-empty.html

----------------

Dodge neon gauges not working?

http://technoanswers.blogspot.in/2012/02/dodge-neon-gauges-not-working.html

------------


Temperature gauge went up?

http://schematicsdiagram.blogspot.com/2011/12/temperature-gauge-went-up.html

------------

Temperature gauge stays At cold on jaguar?

http://technoanswers.blogspot.in/2012/02/temperature-gauge-stays-at-cold-on.html
-----------


How to replace Instrument panel and dashboard on Toyota car?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-instrument-panel-and.html

-----------

How to remove instrument panel on Chevrolet car?

http://technoanswers.blogspot.in/2012/02/how-to-remove-instrument-panel-on.html

-----------

How to remove control panel on Buick regal?

http://howtobyme.blogspot.in/2012/02/how-to-remove-control-panel-on-buick.html
---------------
These details will help.Thanks.

Nov 28, 2012 | 2000 Mitsubishi Lancer

1 Answer

No guages working


If all voltages checked ok, then most probably its faulty instrument cluster board on which gauges are connected. Yes if cluster circuit board looks ok, then also it can be faulty. Somewhere there is minute short or burn on board then such problem arises.


Also check the fuse box. One under hood and other under dash.

Inspect each and every fuse and see if all are fine or not.


---------------

For more troubleshooting on these cluster gauges I suggest you to refer the list of help links mentioned below. Its step by step instructions will help you to confirm the exact cause of problem in these conditions: ---------


Click the link below: ------


2004 Toyota Tundra: Oil Gauge and Temp Gauge Not Working?

http://howtobyme.blogspot.in/2012/05/2004-toyota-tundra-oil-gauge-and-temp.html

--------------

2005 Lexus SC430: Fuel Door, Dome light and Fuel Gauge Fuse Location?

http://howtobyme.blogspot.in/2012/05/2005-lexus-sc430-fuel-door-will-not.html

----------

Toyota 4Runner: Temperature Gauge Sensor

http://technoanswers.blogspot.in/2012/04/toyota-4runner-temperature-gauge-sensor.html

------------

Temperature gauge sits over half way mark?

http://schematicsdiagram.blogspot.in/2012/04/temperature-gauge-sits-over-half-way.html

---------------

Heater blows intermittently and temp gauge goes erratic?

http://technoanswers.blogspot.com/2012/01/heater-blows-intermittently-and-temp.html

----------

Temperature gauge does not move and no heat when heater is ON?

http://technoanswers.blogspot.com/2012/01/temperature-gauge-does-not-move-and-no.html

-----------

2003 Pontiac Grand Prix: Erratic Fuel Gauge?

http://technoanswers.blogspot.in/2012/06/2003-pontiac-grand-prix-erratic-fuel.html

-----------

Temperature gauge keeps fluctuating up and down close to red?

http://technoanswers.blogspot.com/2012/01/temperature-gauge-keeps-fluctuating-up.html

-------------

Temperature gauge on the dash quit working on Pontiac Grand Prix?

http://technoanswers.blogspot.com/2012/01/temperature-gauge-on-dash-quit-working.html

---------------

Fuel gauge jumps from empty to full?

http://schematicsdiagram.blogspot.com/2011/12/fuel-gauge-jumps-from-empty-to-full.html

--------------

Gas gauge stuck on empty on 2002 Mercedes Benz 240c?

http://repairhelpcenter.blogspot.in/2012/02/gas-gauge-stuck-on-empty-on-2002.html

---------------

Oldsmobile Temperature Gauge Lamp Switch?

-----------------

Fuel gauge drops to Empty?

http://technoanswers.blogspot.com/2012/01/fuel-gauge-drops-to-empty.html

----------------

Dodge neon gauges not working?

http://technoanswers.blogspot.in/2012/02/dodge-neon-gauges-not-working.html

------------

Temperature gauge went up?

http://schematicsdiagram.blogspot.com/2011/12/temperature-gauge-went-up.html

------------

Temperature gauge stays At cold on jaguar?

http://technoanswers.blogspot.in/2012/02/temperature-gauge-stays-at-cold-on.html

-----------

How to replace Instrument panel and dashboard on Toyota car?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-instrument-panel-and.html

-----------

How to remove instrument panel on Chevrolet car?

http://technoanswers.blogspot.in/2012/02/how-to-remove-instrument-panel-on.html

-----------

How to remove control panel on Buick regal?

http://howtobyme.blogspot.in/2012/02/how-to-remove-control-panel-on-buick.html

---------------


These details will help.

Thanks.

Nov 28, 2012 | 2000 Mitsubishi Lancer

1 Answer

2007 Chrysler 300. When outside temperature is below 30 degrees, I cannot keep the windows clear of moisture and fog. Even the defroster on high has difficulty clearing and keeping the windows clear. I do...


If your car has an air conditioner turn it on as well as the heater . Air conditioned air is very dry and usually defrosts the windscreen quickly. The heat from the heater will overcome the cold air from the air/con. It is good for the air/con to be run during the winter months as well as summer, it stops the seals drying out and leaking refrigerent.

Apr 05, 2011 | 2007 Chrysler 300 AWD Sedan

2 Answers

I have a 2006 chrysler 300 it will not reach operating temperature. It warms up while idleing like normal, but once I start driving on the highway the temperature goes back down. This happens when the...


If thermostat is ok then you could have an air lock in your radiator.
Possible water pump not working properly such as the impellor slipping..
Radiator may be partly plugged and not letting the fluid flow.
Are your belts tight enough so they do not slip. Your main belt lightener may not be working so when the engine speeds up it slips instead of working.

Oct 02, 2017 | 2006 Chrysler 300

2 Answers

How do i fix heater core on a 2006 chrysler 300


If you're getting hot air, it's not the heater core.

Windows fog up because the humidity level inside the vehicle increases while the temperature of the windows decreases to a point where the dew point of the air is higher than the temperature of the glass. When this happens, moisture from the air condenses onto the glass. When you breath out, you increase the humidity of the air in the car because of the moisture in your breath.

The key for defrost to work isn't necessarily heat, it's more important to dry the air. There are two ways of doing this:

1.) Make sure you have the air recirculation turned off. This feature causes your car to recirculate air from inside the car through the air ducts. In the summer when it's hot and humid outside, this is what you want. However in the winter when the air is dry, you want to bringing fresh dry air from outside to replace the humid air inside the car.

2.) Turn on the A/C compressor. This will cool the air before it passes through the heater core. Cooling air removes moisture. This is why your car drips water from underneath in the summertime when you run the A/C. It is literally removing moisture from the air.

However, if your heater isn't working (blowing cold air even when on the warmest setting), then you may have a different problem.

Feb 15, 2009 | 2006 Chrysler 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...