Belt routing diagram for 2007 caliber w/ 2.4

Question re-written for clarity.
Question moved to model category.

There aren't any. The headlights are a function of the IPM (integrated power module). Fuse 36 is the control according to this.

Headlamp / Washer Control / Smart Glass

What's the 2007 Dodge Caliber headlight relay location?

Vehicle History https://www.vehiclehistory.com > questions > whats-th...
Jul 16, 2020 - The head lamps are controlled by a fuse in the engine bay. To locate the integrated power module, open the hood and look on the driver's side of ...

2 answers · Top answer: The 2007 Dodge Caliber is noted for driver's side low beam headlights that f

Dodge Caliber (2006-2012) fuses

Fuse Box Diagrams https://fuse-box.info > dodge > dodge-caliber-2006-2...

Fuse box diagram (location and assignment of electrical fuses) for Dodge Caliber (2006, 2007, 2008, 2009, 2010, 2011, 2012).

Fuses and relay Dodge Caliber - Fuse box diagram

fusesdiagram.com https://fusesdiagram.com > dodge > fuses-and-relay-d...

Locate fuse and relay. Fuse box diagram. Identifying and legend fuse box Dodge Caliber 2007-2012.

..

if the belt is still on the car take a picture to know the routing of it. there should be a decal under the hood somewhere that shows the belt routing.

there should be a white tag in or near the front of the vehicle that shows how the belt runs..if not a parts store can print out the diagram for you..

Hope this helps, good luck! http://www.calibersrt4.net/attachments/dodge-caliber-srt-4-discussion/4076d1289423128-belt-routing-help-caliber-accbelt.jpg

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

There is a diagram in the engine compartment itself that displays belt routing and removal.

When you look at the engine and all the pulleys that the serpentine belt goes around, one of those pulleys will have a "tensioner" on it. On that "tensioner", there should be a square looking slot for you to insert a socket extension to or you may have enough room to just use the socket drive handle itself.

Rotate counter clockwise until you have relieved enough tension to slide the belt off. Reverse the procedure for re-installation.

From this website:
http://www.accessdayco.com/automotive#/2007/DODGE/Passenger%20Cars/CALIBER/L4%202.0L%201998cc%20122ci%20GAS%20FI%20N%20B
This is belt route for 2.0L with air: