Remove front rotor on a 1999 dodge 2500 4x4 - 1999 Dodge Ram 2500 4WD

Ask your neighbor for help

there is some kind of tool that they actually make to remove rotors that i purchased to get the rotors off of my '99

Warped front rotors. Replace rotors.

Hi,

It is a whole hub assembly. You remove the pin and unbolt the hub assembly and replace.

What is needed is to raise your truck and support it with jack stands ( no concrete blocks) then remove the brake caliper and pads, be sure to support the caliper with mechanic's wire or what you have on hand that will do the job.

Then remove the brake rotor "hat" then remove the cotter key then the hub retainer nut and remove the hub. The new hubs are greased so just replace the hub torque, install new cotter key the rotor hat and pads and caliper.

I hope this helps.

sounds like a stuck caliper

take wheel off then remove brake caliper rotor is then able to pull off yes it is that easy

U MUST REMOVE THE BRAKE CALIPER ASSEMBLY THEN THE ROTRS COME OFF.

WHICH ONES FRONT OR BACK ROTORS AND PADS.YOU NEED A HAYNES REPAIR MANUAL.NEED SOME TOOLS LIKE C - CLAMP AND YOU NEED A 3/8 IN HEX WRENCH OR SOCKET TO REMOVE BRAKE CALIPER BOLTS.REPAIR MANUAL WOULD BE HELPFUL.IT WILL SHOW YOU HOW TO DO THE JOB WITH PICTURES.

Have the front end checked by a mechanic. The problem could be wheel balancing, front end alignment, broken tire belt or a number of related things. The rotors are held in place by the wheel lug nuts. Good luck!

Jack up car, remove wheel assembly, remove brake caliper after moving pads into piston and retainer. DO NOT LET THE CALIPER HANG! The rotor is now free to come off the spindle....accordianman