Question about 1985 Chevrolet C1500

2 Answers

How do i change out the shift indicator on an 85 chevy c10 pickup. i bought a new one cause mine didnt tell you which gear you were shifting into and now i dnt know how to get to it to change it out

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

You have to drop down the column by removing the two front bolts that hold it on, you can remove the bezel by removing the screws off of it and you can remove the clip that holds on the cable to the outer shift bezel and remove two screws holding the shift indicator on and install the new one as you see old one attached. Normally all that happens is the spring or cable breaks. Then you have to slide it on the bezel to get it to read the right gear.

Posted on Sep 13, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 811 Answers

Remove bolts holding up steering column, remove other parts as needed

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1984 Chevy C10 pickup wont kick down in passing gear


I will assume you have a TH350 transmission? If it won't go into passing gear when you floor it, will it go into passing gear when you manually downshift 1 gear? If it does then most likely either your shift cable came out of adjustment or your throttle body may be clogged preventing it from shifting automatically when you press the gas.

Jun 12, 2017 | Cars & Trucks

2 Answers

I'm looking at purchasing a 96 chevy c10. It has the 5.7L vortec with manual 5spd transmission. While test driving the transmission grinds in 2nd gear everytime you shift gears. All other gears shift...


The synchronizers are bad. Costs about $200. But I check and replace bearings. Also check gears. About a $1500 job. You pull the transmission. I pull, $2500. I replace the master and slave also.

Feb 21, 2015 | Chevrolet Cars & Trucks

2 Answers

Hard shift from first to second gear


if its an auto the chances are that the kickdown is to high and needs adjusting, basically the engine is reving to high betwen gear changes

Feb 14, 2012 | GMC Jimmy Cars & Trucks

2 Answers

My 1993 Gmc Sierra 2500 automatic first gear shifts hard also from park to drive others gears are smooth i have overdrive


The gear shift lever indicators tell you what gear you have an automatic transmission in on your vehicle. The shift solenoid tells the transmission when to shift gears and what gear to shift into. Newer model automatic transmissions have electronic shift solenoids that are activated and change gears based on the speed the vehicle is traveling. Troubleshooting either one of these transmission components is relatively easy if you know a little about automobile mechanics. With the right tools, you can determine whether the transmission shift solenoid is having a problem. Gear shift indicator problems can be determined simply by moving the gears into their designated position.
Transmission Shift Solenoid
  • 1 Raise each corner of the vehicle up with the car jack and place jack stands under the frame. Make sure the car is raised high enough so you can work under the car freely.
  • 2 Slide the drain pan under the transmission fluid drain plug. Remove the drain plug with a ratchet and socket, and let all the fluid drain out of the transmission. Remove the transmission pan bolts with a ratchet and socket. Pull the pan away from the bottom of the transmission, revealing the transmission shift solenoid.
  • 3 Wipe off the shift solenoid with a shop towel. Disconnect one of the two plugs that attaches to the shift solenoid. Turn the knob on the volt meter to the ohms setting, so resistance can be measured. Set the volt meter on 200.
  • 4 Take the black lead of the volt meter and touch the negative battery terminal wire. Take the red lead of volt meter and slide the tip into the terminal plug you just disconnected from the shift solenoid. Look at the reading you get on the digital display of your volt meter. Determine if the reading is between 12 and 25. Readings below 12 or above 25 tell you that the shift solenoid is not working. Reattach the plug to the shift solenoid and pull the second plug attached to the solenoid. Perform the same procedures on this plug wire. Replace the transmission shift solenoid after determining it is bad.
Gear Shift Indicator
  • 1 Move the gear shift into the desired gear. Look at the gear labels and the arrow, or other indicator, to see if the gear shift indicator lines up with the selected gear.
  • 2 Move the gear lever to another gear and look to see if the indicator lines up with the selected gear. Misalignment of the arrow will tell you if there is a problem. Moving the gear shift to "neutral" but having the indicator show the transmission is in "drive" tells you the gear shift indicator is not working properly.
  • 3 Try each gear position to determine how much misalignment is in the indicator. Slide under the car and check for a loose gear shift cable. Check all the gear shift cable connections to ensure they are all tight and are not missing. Tighten any loose gear shift cable clamps or bolts. Replace the gear shift cable if you find that this is causing the misalignment with the gear shift indicator.

Feb 02, 2012 | 1993 GMC Sierra

1 Answer

Reduced engine power came on i'n my 00 chevy


Ok I would start by checking your shifter to make sure it adjusted right and you can do this by looking at your shift indicator if that is ok then might have a bad manual shift valve thats in the transmission, if that valve goes bad it would tell the pcm that your transmission is being shifted into another gear while your driving causing the Power control module (PCM) to out you vehicle into reduced engine mode

May 23, 2011 | 1999 Chevrolet K1500

3 Answers

88 Toyota Pickup, has become difficult to shift in to gear. Once in gear (1,2,3,or4th) very smooth. I believe must be something up front in the clutch linkage. Possibly? Can get into, but takes awful...


if your linkage was bent it wouldnt shift into all gears easily.sounds like you need to blead your slave cylinder to your clutch.10mm wrench and bleed it like your brakes same type set up.

Nov 24, 2009 | 1988 Toyota Pickup

1 Answer

1997 chevy k1500 pickup-transmission shifting problems


check the fluid level in the transmission, also change the transmission fluid and filter

Jul 30, 2009 | 1997 Chevrolet K1500

2 Answers

Transmission on my 2000 chevy k2500 4x4 pickup


your transmission has possibly been rebuilt with stronger springs put in. No worries. have been running mine for along while without any problems. Better this than slipping, but it is a bit annoying.

Jun 08, 2009 | 2001 Chevrolet Silverado 2500HD

1 Answer

On the 1990 ford tempo wont come out of first gear while driving, had work done on outboard drive after it busted up.


problem one adust the safety netural switch to allow itto start without having to push up, Problem 1990 ford the shat bentthe shift linkage, Problem three this is the Nissan section not ford and chevy.

Jun 03, 2009 | 1995 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

657 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...