Question about 1984 Chevrolet S-10

1 Answer

Window came off track and fell into door need to get panel off and reconnect so window rolls up and down. this is on an 1984 chev s-10 drivers side window need advice on removal of door panel,and possible parts needed to finish the job. the window itself is intact may need interal parts

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

All you need to do first is remove the screws that hold the door handle on there should be three, next gently pop the panlr off useing a screw driver do not break the wires that control the windows and door locking system and then if you need to replace the entire window track do so but if you do not need to do not if you do it is easy to do so just remove the nuts at the botom of your door , they hold the window track in place and then remove the three bolts that hold the motor in place and then next gently pull the window up and then remove the traco after you have removed the window and reverse the process when putting new track in.

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My driver side window rolled down unevenly and now it won't roll up all the way.


How are all the connections secured? probably not nuts or screws but special press on fittings. My guess these things came of and are missing.

Apr 23, 2015 | 2006 Hyundai Elantra

1 Answer

The drivers side window fell into the door of 96 rendezvous. How do i put it back on track?


The door trim is held on with a combination of screws and push clips Once you have the trim off you will probably find that the window motor regulator is defective. I would recommend replacing the regulator and motor as an assembly.

Are you sure of the year? Didn't think that they made a 1996 Buck rendezvous

.http://www.dormanproducts.com/gsearch.aspx?

Feb 23, 2015 | Cars & Trucks

1 Answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?


R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck

Sep 14, 2014 | 2003 Nissan Altima

1 Answer

I have a Isuzu Rodea 2002. My driver side window wont roll up. Its a manual window. and when i start to roll it up it gets difficult half way up and acts like it might snap. but when i roll it down its...


sounds like it is off track, you will need to remove the door panel, screws in the arm rests, one on the crank or a snap ring, and possible one in the inner middle of the door panel, once all screws and crank are off/out the take a flat tip screw driver and work around the outer of the door panel as there are like 10 plastic clips on the inside of the panel, once panel is off inspect the regulator, this is attached to the window crank, make sure the cable is not frayed or broken if so then you will need a new regulator. Hope this helps Tim

May 09, 2011 | 2002 Isuzu Rodeo

1 Answer

Driver window fell down. how do i fix it back to roll up and down?


The nylon bushings are broken on the rail inside the door. You must remove the inside panel and replace the bushings

Feb 02, 2011 | 1984 Chevrolet S-10

1 Answer

Driver window off track,went to roll window down and window fell inside of door.Window crank turns freely.


remove door panel, If you are mechanically inclined you can figure out how to connect the regulator (operating assembly) back to the window by removing mounting bolts of assembly and pivoting. Something came loose or broke, window guides are worn (plastic parts), or assembly is way out of alignment for window to fall off track....

Sep 16, 2010 | 1993 Plymouth Acclaim

1 Answer

Need to know how to replace driver window in 1988 bronco. window has a side vent.


you will need to take off door panel and roll the window down. You should be able to look inside and see the tracks it rolls up and down on. disconnect from tracks and pull old window out the top of door, slide new window in and hook to tracks, should be very easy to install on such an older truck.

May 18, 2010 | 1988 Ford Bronco

1 Answer

2003 chevy impala drivers side power window rolls up very jerky but rolls down fine is this a motor or a fuse issue and what can i do to fix it


poss ur window is off track or needs to be lubed in the tracks take off door panel and see if window is off track

Apr 10, 2010 | 2003 Chevrolet Impala

1 Answer

Non working driver side power window 2003 Nissan Sentra


I had a similar problem, window fell down one day while driving. Screw was loose at bottom of window that connects to track. Was hard but fixed it and worked great after. Hope it helps u out.

Aug 08, 2009 | 2003 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...