Question about 1990 Ford Tempo

2 Answers

Cooling fan not working

Cooling fan not coming on i change the relay checked fuses change fuses i dont know

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 811 Answers

 buy manual, see if fan runs with alt power source(jumper wires), check temp sending unit 

Posted on Sep 13, 2009

Testimonial: "thank you"

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 62 Answers

Could be the fan motor has a problem. You could probably get one from a wrecking yard and save some dollars. Just make sure they check it first.
Good Luck

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radiator fans not working


disconnect the temperature sensor the fans should start in a few seconds that would mean your relay is good usually the fans work if the engine is full of anti freeze so the temperature sensor can kick relay then relay starts fans.

Dec 09, 2013 | 2003 Pontiac Grand Am

2 Answers

Engine cooling fan only works when ac or defrost is on


if engine at long stand still,the engine temperature will rise about 190 degrees the cooling fan suppose to automaticaly turn on when coolant temperature sensor get hot it cause its resistance decrease causing pcm to send power to coolant fan relays and cooling fans, when you turn on AC the cooling fans suppose to turn on to cool down AC CONDENSOR, IF NOT AC WONT WORK COOLING FAN COOLS DOWN REFRIGERANT SO IT CAN RECYCLE THROUGH THE SYSTEM AGAIN.your cooling is suppose to turn on when engine at a sit still if vechicle not moving as coolant temperature rises at a set point the cooling fans will turn on cool down engine.cooling fans dont turn on when you first cold stsrt vechicle unless you have AC SWITCH ON.if cooling fans dont turn on when vechicle at a long stand still or moving along slow traffic.if coolant temperature sensor been replaced and fuses and relays okay have dealership check see if pcm driver circuit working faulty pcm will cause cooling fans not to turn on.

Sep 27, 2012 | 1996 Buick Century

1 Answer

Cooling fans do not come on 1994 honda accord


turn on a/c if they still dont come one unplug and use jumper wires to ck fans if they dont work replace both fans if fans work ck fuse and relays if fuse and relay have power ck pcm/ecm

Jul 29, 2012 | Honda Cars & Trucks

2 Answers

My beetle 2001 radiator fan no working and aircond also come out without cool air, engin overheating problem. i send to workshop and check wiring and fuse all in good condition. please give advise what...


Because there is no supply to the fan , it is not working. So you need to check the fan with a direct link to test , is working check the RELAY box for the fan relay, next check on the thermistor, the control circuit of the temperature controller to trigger the fan relay. Also check on the fuse to the relay unit.
The AC cooling must be checked only after this circuit is working as a hot engine will not give a good result. cehck the gas pressure, check the pumping pressure to confirm the compressor.
Also the eveporator, condenser, pressure switch must be checked independantly.

Aug 08, 2011 | 2001 Volkswagen Beetle

1 Answer

Need to know where the fuse is for the fan by the radiator. I know where the fuse box is at because mercury sable has 2 boxes. Which one contains the fan fuse. My fan is not working and been replaced and...


You have a relay there are 2 speeds low speed and high speed this is controled by a cooling fan module if you changed fan and it does not work then you will need to check the fan module, first the relay its in the engine fuse junction box High speed is marked on the relay C1056 and low marked C1058, here is what you can do go to the high spped relay open thhe cover and expose the relay with key on collapse the relay does the fan come on? if it doesnt replace the fan module if it does you will still have to replace the fan module here is the location is at the radiator on the front (may be under shroud)

Jun 08, 2011 | 2003 Mercury Sable

1 Answer

Cooling fan on radiator do not work sending unit on block checks ok with oms meter relay in fuse box ok now what


Change the thermostat and bleed the ir from the cooling system,then ,if the cooling fans do not come on,check the relay module under the cooling fans on drivers side,they are bad to go out,but if there is air in the cooling system,the cooling fans will not come on.

May 31, 2010 | 1998 Dodge Caravan

2 Answers

The radiator fan does not come on causing the engine to overheat


unplug the fan jump the conector with twelve volts if it comes on you need too do some extensive testing starting with the fuse and relay try turning on the a/c. the ac and coolant temp sensor control the fan if it douesnt come on repalce the fan chances are it will and you will probly need a auto tech too find the fault in that circuit if it is not the fuse go there first then the relay you probly dont know how to check them heres a quick trick swop it with onother one you knows works from another component see if it come on

May 02, 2010 | 1991 Oldsmobile Cutlass Ciera

1 Answer

Cooling fan will not come on what can i check to fix this problem this is on a 1995 grand am 3.1 litre i also have a problem with the horn it wont work and the fuse is good.


The horn maybe a horn relay,or a bad horn,or the horn button .The cooling fans,check to see if they will come on with the ac on,if not,check the fuses,and the cooling fan relays,if the cooling fans come on with the ac,then change the coolant sensor.

Apr 23, 2010 | 1995 Pontiac Grand Am

1 Answer

Does a 95 cutlass supreme have a fuse for the cooling fans or only the relays. I dont see a fuse for the cooling fans. Neither fan is coming on, Ive jumped the fans they both work, Ive changed out the...


There are three fuses and two relays for your coolant fan. They should all be in your underhood fuse box. They may not be marked "coolant fan", so check them all, (2) 60 amp , (1) 20 amp, (1) 15 amp. If all the fuses are good, you may have a bad fan switch (temp sensor). It tells the fan when to turn on, follow the wire from the fan motor to find it.

Dec 19, 2009 | 1995 Oldsmobile Cutlass Supreme

2 Answers

I have a 94 olds cutlass cierra and the fans dont work


Check fuses, relays, the hook fan straight to batt power with jumper if fan is inop replace. If it works find your wiring problem.

Sep 21, 2009 | 1994 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1990 Ford Tempo Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...