Question about 2008 Mercedes-Benz Mercedes Benz C Class

1 Answer

When driving at 15 miles, the car is usually on second gear, when pressing the gas pedal, one of 3 things happen, it easier feels as a little jump occured, or an increase in RPM, that settles down shortly to drive normally, or if I pressing very slighlty it feels as if the car is moving back and forth. this only happens on second gear.and at very low speeds. car is a 2008 Mercedes C200 kompressor, with automatic gear.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 62 Answers

I would suggest a service of the automatic transmission where the filter will be cleaned, bands tightened and new transmission fluid put in. the autotransmission is often forgotten about in our car servicing.
Good Luck

Posted on Sep 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 2004 AZTEK AND HAVE VIBRATION WHEN PRESSING GAS PEDAL. WHAT CAUSES THIS?


you don't say where the noise is. that is important to give a clue where the issue is. when stopping on the brakes 3 things happen. you press the pedal and the abs pump starts pumping fluid. the second is the brake capilers start pushing on the rotors to slow the car. the rotors are attached to the wheels and that stops the car. so if the rotors are warped you will feel a vibration in the steering wheel when stepping on the brakes. if its your foot feeling the pump working that is normal for abs pumping. you should feel it and holding the pedal will keep it working and stop you from skidding if everything is working correctly

Mar 10, 2015 | 2004 Pontiac Aztek

1 Answer

99 chevy cavalier Z24 car will stall at stop signs/ red lights and at times while I'm driving sometimes if I press the the gas pedal few times quickly i can get it to go but it jumps when it takes off


mine does the same thing but it has way 300,000 miles on it..be looking for a tuneup and some vacuum leaks..mine has matbe 3 in it that I cant reach..so I drive with 2 feet..

Mar 15, 2014 | 1999 Chevrolet Cavalier

1 Answer

Kia Spectra feels like brakes are locked or too tight


See a mechanic. Gas prolly loose or need new clutch if its a standard

Sep 29, 2012 | Kia Cars & Trucks

1 Answer

When I put my 1997 audi a4 in gear it jumps and when i drive it feel like it drags until I take feet off gas pedal


The first thing that needs to happen here is to have the computer control module scanned for fault codes, this is numero uno.

Feb 20, 2012 | Audi Cars & Trucks

1 Answer

Car shakes and gas does not work


could be a number of things, may be worth checking there is no oil build up on the plugs. but it sounds like a possible fuel line blockage or clogged fuel filter. with 9000 on the clock you should not realy be having these problems though. its possible, if you've run out of fuel you could have dragged dirt from the botom of the tank. or there may be a problem with the fuel pump. id say its well worth having someone who know what they are doing have a good look for you.

Jun 29, 2009 | 2007 Audi A4 Convertible

1 Answer

Could my transmission be slipping


Quick check is to accellerate from a stop with steady even pressure on the gas. Watch the tach. It should have a good shift at approximately 2000 rpm and the tach should not jump higher during the actual shift (called flairing) This should be the same for each shift. Converter lockup (4th gear shift) should cause tach to drop about 500rpm and should happen at about 45mph. Then repeat the same process using a more agressive acceleration.
Shift points in rpms may be a bit higher but each shift should not flair. To check lockup, while driving at about 50mph, lightly touch brake pedal and you should feel ti disengage for a moment. Since you have an opportunity to return it, It would not be a bad idea to get a hands on evaluation from another shop you trust...I can't see it from here and a live person is better equipped to give an informed opinion.

Jun 22, 2009 | 2007 Jeep Compass Limited

1 Answer

NO SECOND GEAR IN TRANNY


sounds like what happened to my camaro. it sounds like a stuck valve. i suggest taking it in for an estimate at a transmission specialist.

Mar 18, 2009 | 1996 Chevrolet K1500

Not finding what you are looking for?
2008 Mercedes-Benz Mercedes Benz C Class Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...