Question about 2002 Volkswagen Jetta TDI

1 Answer

Every now and then the warning light on dash comes on esp and service light and car will not accelerate if i switch ignition off then on while still moveing it is ok again my car is a c5 2.2 diesel

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 119 Answers

You need to get an OBD codes reading done to be certain of the exact problem. Assuming that the ABS light is NOT also coming on and from what you describe it seems that you may have a stability problem...hense the ESP light showing. If code scan shows a fault "yaw sensor malfunction"....Try disconnecting this sensor for a few seconds and then re-connect. This sensor is prone to giving trouble and is bolted to the floor on the car...under the rear seat.
Hope this is of some help to you
Best of luck with it
John .

Posted on Sep 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix the ESP dash warning


You would need a scan tool connected to the vehicle to clear the warning but there is no point unless the issue causing the fault light has been rectified. Without the fault being identified correctly and fixed the warning will come back on next time you drive the car.

May 09, 2016 | Mercedes-Benz C-Class Cars & Trucks

2 Answers

Yellow triangle with ! in the middle popped up on dashboard what does that mean


It's the ESP warning light, You may have a ESP button on the dash which you can push to reset it, Otherwise try having the car idling in neutral and turn the steering wheel fully left then right the back to middle, This should reset the light, if it comes back you will need to get the car plugged into a diagnostic scanner to find the issue.

Mar 04, 2012 | 2001 Mercedes-Benz C-Class

1 Answer

I have a red dash light lit. It is an exclamation in a trialngle with a counter clockwise circle around it. Can anyone tell me what it means? I drive an Audi A4 2005


ASR - Acceleration Skid Control system.
When ASR warning light blinking the system is activated itself for car acceleration skid control.

For today's typical high-torque engines, traction control (ASR) can increase both comfort and safety, particularly when driving on slippery roads or surfaces offering differing levels of grip. Traction control permits smooth starting and acceleration through the full speed range without wheel-spin or fishtailing.

tdisline_338.jpg


ASR only operates in conjunction with the electronic accelerator (E-gas) and uses components of the anti-lock braking system (ABS). If one wheel suddenly begins to rotate faster than the others (slip), ASR intervenes in the engine management system and reduces power until the wheel stops spinning.
The ASR system represents a further contribution to active safety as it maintains vehicle traction and directional stability throughout the acceleration phase at any speed. In addition, it reduces tyre wear. Activation of the ASR system is indicated by a flashing indicator lamp in the instrument cluster.
The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Sep 27, 2011 | 2005 Audi A4

1 Answer

I have had a light come on the dash bored with ! in a trangle and circle and i have look in manual and cant find it


ASR - Acceleration Skid Control system.
When ASR warning light blinking the system is activated itself for car acceleration skid control.

For today's typical high-torque engines, traction control (ASR) can increase both comfort and safety, particularly when driving on slippery roads or surfaces offering differing levels of grip. Traction control permits smooth starting and acceleration through the full speed range without wheel-spin or fishtailing.

tdisline_538.jpg


ASR only operates in conjunction with the electronic accelerator (E-gas) and uses components of the anti-lock braking system (ABS). If one wheel suddenly begins to rotate faster than the others (slip), ASR intervenes in the engine management system and reduces power until the wheel stops spinning.
The ASR system represents a further contribution to active safety as it maintains vehicle traction and directional stability throughout the acceleration phase at any speed. In addition, it reduces tyre wear. Activation of the ASR system is indicated by a flashing indicator lamp in the instrument cluster.
The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

May 19, 2011 | 2002 Volkswagen Golf

2 Answers

What does it mean when a yellow triangle with a surrounding arrow comes up on dashboard says "engin workshop"


ASR - Acceleration Skid Control system.
When ASR warning light blinking the system is activated itself for car acceleration skid control.


For today's typical high-torque engines, traction control (ASR) can increase both comfort and safety, particularly when driving on slippery roads or surfaces offering differing levels of grip. Traction control permits smooth starting and acceleration through the full speed range without wheel-spin or fishtailing.

tdisline_338.jpg


ASR only operates in conjunction with the electronic accelerator (E-gas) and uses components of the anti-lock braking system (ABS). If one wheel suddenly begins to rotate faster than the others (slip), ASR intervenes in the engine management system and reduces power until the wheel stops spinning.
The ASR system represents a further contribution to active safety as it maintains vehicle traction and directional stability throughout the acceleration phase at any speed. In addition, it reduces tyre wear. Activation of the ASR system is indicated by a flashing indicator lamp in the instrument cluster.

The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Mar 12, 2011 | 2003 Volkswagen Passat

1 Answer

I have a yellow triangle light that appears on the dash intermitanly on a 2000 volkswago passat. What could this be? Thanks Lisa


The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

tdisline_292.jpg
ESP system includes ASR - Acceleration Skid Control system.
When ASR warning light blinking the system is activated itself for car acceleration skid control.

For today's typical high-torque engines, traction control (ASR) can increase both comfort and safety, particularly when driving on slippery roads or surfaces offering differing levels of grip. Traction control permits smooth starting and acceleration through the full speed range without wheel-spin or fishtailing.
ASR only operates in conjunction with the electronic accelerator (E-gas) and uses components of the anti-lock braking system (ABS). If one wheel suddenly begins to rotate faster than the others (slip), ASR intervenes in the engine management system and reduces power until the wheel stops spinning.
The ASR system represents a further contribution to active safety as it maintains vehicle traction and directional stability throughout the acceleration phase at any speed. In addition, it reduces tyre wear. Activation of the ASR system is indicated by a flashing indicator lamp in the instrument cluster.


Please do rate my response. Thnaks!

Feb 20, 2011 | 2005 Volkswagen Passat

2 Answers

I havea 2009 tuscon sx. the ESP OFF light comes on occassionally affecting the gearbox & not allowing the car to get out of gear. the ESP OFF button on the dash doesn't do anything. We have taken it...


Whenever that ESP/ESC warning light comes on, there is a diagnostic code set (DTC). This code tells the technician which component in the system CAUSED the ESP/ESC control module to turn ON the warning light!

Did the technicians SCAN for any DTC's? Since the vehicle is a 2009, the service department is supposed to have Hyundai's GDS (Global Diagnostic System) available to do this. If they don't have this equipment, find a service department that DOES!

Feb 08, 2011 | 2009 Hyundai Tucson

1 Answer

A light has come on on the speedometer a triangle with a exclamation mark with a circled arrow round it,what is it?


ASR - Acceleration Skid Control system.
When ASR warning light blinking the system is activated itself for car acceleration skid control.


For today's typical high-torque engines, traction control (ASR) can increase both comfort and safety, particularly when driving on slippery roads or surfaces offering differing levels of grip. Traction control permits smooth starting and acceleration through the full speed range without wheel-spin or fishtailing.

_672.jpg
ASR only operates in conjunction with the electronic accelerator (E-gas) and uses components of the anti-lock braking system (ABS). If one wheel suddenly begins to rotate faster than the others (slip), ASR intervenes in the engine management system and reduces power until the wheel stops spinning.
The ASR system represents a further contribution to active safety as it maintains vehicle traction and directional stability throughout the acceleration phase at any speed. In addition, it reduces tyre wear. Activation of the ASR system is indicated by a flashing indicator lamp in the instrument cluster.

The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Please do rate my response. Thnaks!

Feb 07, 2011 | 2002 Volkswagen Passat

2 Answers

How it reset service engine light


Is it the "oil change req." light? Your owners manual will have the process for reseting the oil change light.
If it is "service engine soon" light, the vehicle will need to be scanned with a professional scanner.

Jun 20, 2009 | 1996 Dodge Caravan

4 Answers

ABS, ESP, Level warning lights (2004 Allroad TDI)


I had the brake light switch replaced by a local dealer. Cost was $140 and it fixed the problem. Have driven the car for two weeks since and no lights and all systems normal.

May 22, 2008 | 2004 Audi allroad

Not finding what you are looking for?
2002 Volkswagen Jetta TDI Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...