Question about 1996 Chevrolet Suburban

Open Question

My transmission won't come out of first gear it only drive in first gear

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why the transmissiom won' engage in any gear


Transmission won't engage Drive or Reverse - EricTheCarGuy

www.ericthecarguy.com/.../53999-transmission-won-t-engage-drive-or-r...
This transmission shifted smooth and strong through all gears until today when it stopped all of ... Any idea on where we should start tackling this issue? .... Also, make sure that the pressure tester is not leaking or you will run the tranny dry(use ...

Gear shifter goes from park to drive with no effect. Won't ...


Nov 26, 2015 | Cars & Trucks

1 Answer

Automatic transmission hesitant or won 't upshift


transmission rebuild time the clutch disc are burnt all ready

Jul 20, 2013 | 1987 Toyota Pickup

1 Answer

2003 ford explorer transmission won,t pull in any gear.


check make sure transmission fluid not too low or could have plugged transmission filter.or code scan for faulty transmission fluid pressure sensor or transmission range sensor bad or out of adjustment.transmission could have failed.garage has to run fluid pressure test see if transmission failed or you could have faulty shift solenoid..

Feb 26, 2013 | 2003 Ford Explorer Sport

1 Answer

Transmission won't shift into high gear.


are there any codes? Does it shift ok in 1st and 2nd? sounds like your over drive shift solenoid or your 3 and 4 shift solenoid is stuck and needs to be replaced

Jan 02, 2013 | 1997 Chevrolet Blazer

1 Answer

Transmission won't engage


Do you have transmission fluid, Is the trans filter plugged in the transmission pan?

Sep 05, 2012 | 2004 Buick Rainier

1 Answer

Transmission won't go into gear makes a chime when


Check the transmission fluid, run the vehicle at operating temperature,vehicle in park check the transmission fluid level if the fluid has the correct level you are dealing with a failed transmission,and a replacement or a rebuild is the solution

Mar 28, 2012 | 1994 Dodge Caravan

1 Answer

2000 Ford Tarus- Took off from stop sign just fine then car wouldn't go faster. As I pushed the gas, the car reved but wouldn't go. Pulled over and shut car off. Started car again and tried...


I would guess that something inside of the transmission has failed and there is no longer a mechanical connection between the motor and the drive axles regardless of what gear you attempt to move in.[sheared splines, broken planetary, etc.] Often when this happens you won't hear any kind of noise because of the failed parts being inside the transmission case...instead the car just won't go anymore. You could have a CV drive axle joint that has failed but generally they will make some noticable rattling or grinding noise as they churn away when you try to go forward or reverse. If something has failed inside of the transmission then the transmission will need to be removed and repaired. It if is just a drive axle joint that has failed then that can be replaced without doing anything to the transmission. Hope this helps and good luck!

Aug 31, 2011 | 2000 Ford Taurus

Not finding what you are looking for?
1996 Chevrolet Suburban Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...