Question about 1994 Suzuki Samurai

1 Answer

Engine hesitates under 2000rpm in 1st and 2nd

My 1994 suzuki samurai's engine hesitates under 2000rpm in 1st and 2nd gear. But runs fine in higher gears. Why?

Posted by on

  • mike loshbough
    mike loshbough May 11, 2010

    How old are your spark plug wires?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

It may be your map or maf sensor the connection to it to the manifold could be defective, have you noticed poor fuel mileage? if so then check it, also does it idle rought on start up or does it rev high when first started up? If it does you need to chek for vachum leak you can use a can of carburater cleaner to spray around hoses and see if it smooths out if it does at the area you spray it on that is your problem.

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gearbox wont select 5th gear


my suzuki baleno 2001 mod manual has a problem with the gear box. i can go 1st,2nd and 5thgear but can not get in to 3rd and 4th gear...what do you think it could be? thanks my email is: meancutback@hotmail.com

Sep 23, 2010 | 1994 Nissan Sentra 4-Door

1 Answer

Transmission problem in E230 Benz


What you need to check is the transmission release bearing because if there is a clearance on the release bearing you will encounter this problem and also check the transmission oil.

Jun 08, 2009 | 1996 Mercedes-Benz E-Class

1 Answer

Transfer gear case shift jammed


There are four probable causes when the gear is stuck in one position, and they are precisely explained in this handy diagnostic article that I know will help narrow down the culprit of your difficulty:
http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Transmission_System_Stuck_In_One_Gear.htm

Good luck!
Brad

May 26, 2009 | 1986 Suzuki Samurai

1 Answer

Performance issue


Did you check the ignition timing of the engine before you fire it up? Increase in temperature with increase in load is usually caused by retarted ignition timing.

Apr 17, 2009 | 1995 Suzuki Sidekick

2 Answers

1987 Suzuki Samurai Clutch problem.


Adjusted Clutch cable assembly under passenger side of vehicle. Had assistance from friend depressing clutch pedal and engaging shift lever. Problem went away

Mar 18, 2009 | 1987 Suzuki Samurai

1 Answer

I have every gear but 2nd on a 87' suzuki. new trans or fixable


you can have this rebuilt but the problem is finding someone to do the work because it not just something any body can do and the cost of having this done is expensive

Mar 02, 2009 | 1987 Suzuki Samurai

1 Answer

Automatic Transmission shifts late and rough after warm


If it has over 60000 miles it may need a transmission service, which includes a filter and fluid change, fluid may look fine but if filter is clogged and not picking up fluid fast enough when u give it gas the pump spins faster and forces fluid thru to shift, more fluid is needed to shift into higher gear.than to drive

Jan 06, 2009 | 1994 Chevrolet Caprice Classic

1 Answer

Engine Idle High/Loss of overdrive and third gear


did you check for vacuum leaks? vacuum leak will cause a higher rpm , and some use vacuum to shift transmission,

Oct 27, 2008 | 1994 Cadillac Fleetwood

Not finding what you are looking for?
1994 Suzuki Samurai Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...