Question about 2001 Mazda B-Series

2 Answers

Somone tried to steal my son's Mazda Rustler last night and cut the wiresw to the starter motor. I've reconnected tehse but still no luck!.I am looking for a wiring diagram if someone can perhaps helpd

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 66 Answers

I'd bet that they blew the fuses that feed the starter/ignition as well - Locate the interior cab fuse box, and with the key in the "on" position. go through it with a test light (one end grounded, pointed end to each side of each of the fuses) and ensure all the fuses are good (if one side illuminates, both sides should, but not all of the fuses will be hot) - I'd also look under the hood and check the fuse links and other main fuses located there as well - -I'd bet you'll find one or more of them is bad or blown...Hope that helps...Hope you find it - Damn thieves...

Posted on Sep 13, 2009

Testimonial: "Thanks for the feedbackI'll try it"

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 299 Answers

Check your fuses a lot of these thieves are knuckle heads and cross circuit the wires also make sure your connecting the right color wires

Posted on Sep 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Mazda Rustler 160i Has been running perfectly. All of a sudden cuts out and now won't start. Fuel problem? Dirt? Not familiar with fuel injection

a blocked fuel filter will give a starving indication well before it gets to clogged to pass fuel
the problem is else where
run the fault codes to determine the problem sensor

Feb 16, 2017 | Mazda Cars & Trucks

1 Answer

Windshield wipers on Mazda rustler pick up bakie 1995 model? The wipers motor is working.

If the wiper motor is working the relay is not your issue. Linkage to the motor must have failed or come loose.

Jul 27, 2016 | Mazda Cars & Trucks

1 Answer

How much gear oil should l put , mazda rustler 1400 1991 gearbox

How much gear oil should must i put in a mazda rustler 1600

Jun 04, 2016 | Mazda Cars & Trucks

1 Answer

What's your question?how much is a starter 's solenoid for mazda rustler '97 model b6 engine

Seems as if you might want to call a parts store for this information.

Jun 24, 2015 | Mazda Cars & Trucks

1 Answer

My 1999 mazda 323 1.4 cuts out at around 3000 revs and when put revs up its fine

It could be the starter motor cutting out at that point before the main motor comes on. When it is fine listen for two motors going at the same time. If that is happening the starter motor has not cut out when it should, and the car needs a mechanic, or auto electrician to fix it.

Aug 05, 2014 | Mazda 323 Cars & Trucks

1 Answer

I had new keys cut for my 1993 mazda 626 after the old one broke (not in barrel). they were working perfectly the last two weeks, until this morning and now the key wont turn. i've tried the...

Try scraping your new key's edge. Its possible that the steering lock may be slightly worn [to your old keys] and the new key may be sticky in the lock mechanism. Also try squirting a little lubricating greece into the lock mechanism.

Nov 07, 2012 | 1993 Mazda 626

1 Answer

2006 Freestar. Ran fine last night. Wouldn't start

How many volts does your battery currently have? A cheap multimeter can tell you; I'm not saying the crew at Advance Auto aren't on top of their game, but they do work at Advance Auto... Anything less than 12v DC indicates a problem, and the battery probably won't have enough juice to turn your motor over with less than 10-11v. If your battery voltage is >12v it sounds like you've got a bad starter solenoid (some vehicles integrate these with the starter itself, some do not). Try giving it a few whacks with a rubber mallet or a hammer handle (aka the wooden part).

Nov 17, 2011 | 2006 Ford Freestar

Not finding what you are looking for?
Cars & Trucks Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides