Question about 2003 Hyundai Santa Fe

1 Answer

Central locking on drivers door not working but still locks with key

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,111 Answers

Check the fuses first then if all are good the issue usually resides within the rubber boot between the door jamb from opening and closing the door causing friction thus causing a brake in the line remove the boot but maby test the switch 1 st then if not working move on to the boot and test for where power exists and where it ends this will be the breaking point and the wire needs to be replaced cut back to power and using a crimping wire connector and a few inches or wire splice into and secure it to a length of the wire and this will most likely solve your issue

Posted on Sep 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to troubleshoot central locking.


Wondering if the door lock mechanisms needs greasing
like some form of resistance to movement may put the power locking out of kilter ..

May 15, 2016 | Mitsubishi Lancer Cars & Trucks

1 Answer

Nissan almera 2.2 central locking not working. I can only open drivers door with key Ive just re charged my battery.


I had that problem the other day
Battery dead charged it fitted it started car central locking for other doors only let go after I drove the car down the road
So it might work for you as well

Jan 08, 2016 | Nissan Cars & Trucks

1 Answer

Can the immobilizer or central locking be switched off in a Nissan Almeria 2001 car?


you can remove the central locking fuse , this will stop the lock/unlock constantly , the problem is usually with the drivers door lock mechanism , that is perhaps why you cant lock/unlock with the key, lock from inside vehicle and get out passenger side, that lock should work with the key until you get the lock changed on drivers door

Jun 11, 2015 | Nissan Almera Cars & Trucks

2 Answers

Mondeo central locking


Try a new battery in the KEY

Jul 09, 2014 | 2003 Ford Mondeo

1 Answer

Central locking not locking all locks from drivers door, will unlock, but not lock. working fine on passenger door with key, locks all. switch to activate central locking on drivers door unlocks but doesnt...


You will need to replace the driver door switch. You can try to pick a switch up from the dealer or a local car wrecker (i.e. Pick-n-Pull). It will involve learning to take apart the door trim panel.

Sep 05, 2011 | 1993 Toyota Corolla

1 Answer

12/6/2010 2003 bmw 325xi: Key does not manually lock/unlock driver door...but still works in ignition and trunk...central locking system still works to lock/unlock all doors(including driver) from...


If the key turns in the lock, but does nothing, then the linkage has become disconnected or broken. The key is mechanical to the lock and the lock has a electrical switch to operate the central locking unit. Could be a simple broken clip from the lock barrel. Hope this helps

Feb 27, 2017 | 2003 BMW 325

1 Answer

1999 Audi A3 1.8T Electric Windows and Central Locking Won't work


will your passenger door open with the key and is it just one side that your windows are not working or both. if its just one side it might be your regulator motor in the door thats not working if its both it might be your central locking pump usually in the boot. however if both of them are working fine it could be that your key needs reprogrammed however i think the 1st 2 are more likely to be the problem.

Jun 24, 2009 | 2002 Audi A4

1 Answer

Driver door central locking


More than likely your front driver door module has failed.  You will need to replace this module and readapt the key fobs for locking and unlocking

May 29, 2009 | 2002 Audi A6

1 Answer

Central locking not working


does it work in the passenger door

Dec 27, 2008 | 2002 Volkswagen Golf

3 Answers

Peugeot 307 1.6 petrol central locking problem


leave ign off with key out 3mins disconnet battery 5 mins reconnett and press lock/ unlock repeatedly until locks cycle through to re sync try this any probs come back to me

Dec 25, 2008 | 2005 Peugeot 405

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...