Question about 1998 Ford Taurus

1 Answer

There is very little power when i start to move off in my car ,or when changing gear.

Posted by on

  • Eric Amundson May 11, 2010

    How old is the fuel filter? Does it idle OK? Is the check engine light on?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,111 Answers

Check the transmission fluids as well as all other fluid levels as long as you are there as well as it may be a fuel filter or fuel pump pressure issue but start with those areas 1st and be sure to check all vacuum lines for cracks as well as the bending plug wires to ensure no cracks are present

Posted on Sep 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tranny, linkage or ???


clutch, and check clutch cable linkage. Make sure there ain't no or very little slack in the clutch cable. It dies because the clutch is still engaged with the flywheel. Car won't move in any gear because the clutch prolly needs to be changed.

Feb 06, 2014 | 1987 Acura Integra

1 Answer

Po303 po304 p2293: codes for a3 cabriolet after changing wrong gears- 5th to 2nd,


For the 303 and 4 replace or check spark plugs. Cylinder 3 & 4 are where error detected, if error persists a little more expense likely ignition coils to test you can move 1 and 2 across and see if the error moves away from 3 & 4. Fix nor problem at a time this I'd start. Also check your battery is giving healthy voltage to your system actually do that first.

Jan 10, 2013 | Cars & Trucks

1 Answer

My car won't start sometimes and when I move the gear shifter a little it starts right up. Is the neutral safety switch bad?


No, It sounds like it is working fine, just a little worn out, A lot of cars have to be coaxed into park to start. Just moving the shifter will do it, the switch itself is very sensitive, as you have found out. It only has to move a fraction to lose contact. It is a fairly easy job to change if it drives you nuts. But I wouldn't fix it till it breaks. It is located on the left side of the tranny where the linkage hooks up. Hope this helps.

Jul 29, 2011 | 1995 Toyota Camry

1 Answer

Saab 93 19 tid moving off in 1st gear very little power for a few seconds then car bursts into life same happens when changing up into 2nd gear


my saabturbo 93 year 2003 model,
sudenly abs and brake lights showing up at meter box... when the lights come out rpm meter, speedometer, air-cond all jam... if the light disapearred everyting will function well back.. on the same time i turn off enjin and try to start back but cannot start until the light showing.. when the light disapearred can start. why?

Oct 23, 2010 | Saab 9 3 Cars & Trucks

1 Answer

I have a 1998 Accent 5spd manual. Cant shift into any gear while car is running, if I turn the car off and put it in gear it will start and move in the process or start and not move but if I let off the...


It is possible that your clutch and the idling counter wheel is not getting detached. Unless the selected gear are moved into the notch the particular gear will not engage. So in this case we have the gear box as the complaint. I hope the gear oils were changed on time and so there is no scope of wear out. Adjust your clutch for full release if the clutch was not full pedal down. If the fault changes you can continue to use or else it wil require for taking the gear box out for resetting. The cost will be for taking the gear box and putting it back as it may only require the idler selector to be reset or the worn out ones changed. Take a estimate at your Hyundai dealer and decide. Good day

Aug 03, 2010 | Hyundai Accent Cars & Trucks

1 Answer

During start Automatic gear does not change


sounds like a brake switch failure. located under the brake pedal and is fairly simple to change out.

Jan 30, 2009 | 2005 Honda Civic

2 Answers

2002 expedition-locks in park after starting,windows not working


Sounds like transmission, if it doesnt move from park gear,

Jan 15, 2009 | 2002 Ford Expedition

Not finding what you are looking for?
1998 Ford Taurus Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...