Question about 1995 Ford Aspire

1 Answer

1995 Ford Aspire won't crank, won't start

I have a 1995 Ford Aspire, just today it gave me a problem, when I try to start it it won't crank, it won't turn any lights on the dash, it won't do a thing. I tried to jump-start it and nothing, same exact thing, I connected my F-150 battery just to make sure the battery wasn't the problem, and it did the exact same thing, and the Aspire's battery did worked on my truck, since the car was just a couple of blocks from home I decided to pull it with my truck, but I was not able to move the shifter to neutral, this is a automatic transmission vehicle, I had the key on, where it should be on, but the shifter will not move, what can be causing this?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

I had a similar problem and my shifter would not work until I got the electrical problem fixed. This was very frustrating, because I wanted to push it from the street to my garage and it obviously wouldn't roll if you can't get it to neutral. You may have a main fuse that is blown that is preventing the 12V current from reaching anything. There is also a fuseable link that is a small wire that is like a fuse that can also overheat and break connection. Your owners manual should show you the location of the main fuses. The fuseable links are usually on the front shock towers and each can be checked with a continuity tester. What you can do is get a good 12V test light and check how far the current travels starting from the positive battery terminal, until you find the problem. Check for breaks in wires and shorts. Since you know your battery is good, it has to be the wiring if its not making it to the fuse box. Just use the process of elimination to go one step at a time.

Posted on Sep 13, 2009

2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 266 Answers

SOURCE: 2007 Mazda6 i sport: Vehicle

Neutrl safty switch needs replaced. If not it wil get to the point it wont start
in any position. Switch is located on trans

Posted on Feb 17, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1995 ford explorer xlt 4wd. ... Wont start. ....just cranks Things I've done. .... has fuel...replaced fuel filter Pushed pressure release on fuel inline till fuel flowed thru...eliminating fuel...

if it starts from aerostart the the problem is that the injectors are not getting a signal to squirt. Run the fault codes to find which sensors are not working.

Nov 22, 2014 | 1995 Ford Explorer

3 Answers

1995 for Aspire will not start

also check whether the distributor is proper or not.

Oct 25, 2008 | 1995 Ford Aspire

1 Answer

1995 Ford Aspire won't crank, won't start

Find and replace the ignition SWITCH, not just the key switch.On most cars it's down the steering colum actuated by a rod from the keyswitch. don-ohio

May 12, 2017 | 1995 Ford Aspire

1 Answer

Crank but won't start

You'll have to figure out if it is a fuel or ignition problem.
Is the check engine light on ? Have you checked for trouble codes ?
It could be a relay, the ignition module, coil, fuel pump, or a list of other things.

Jul 09, 2012 | 1995 Ford Mustang GT

1 Answer

My car won't start, I drove it the day before yesterday and today it wouldn't start. It dosen't make any sound at all. All the lights are coming on but it will not start. It is a 2002 Ford...

need more information, does it crank, and not start? Or no crank? If it cranks and does not start, the first suspect would be a crank sensor, they do that...if it does not crank, the battery has to be charged first to get it to crank-we can go on from there...

Jun 06, 2011 | Ford Taurus Cars & Trucks

1 Answer

I am hearing an unidentified beeping sound from within the dashboard of my 1995 Ford Ranger immediately when I crank and again after it has been running for 30 minutes.

Door ajar beep. Mine started doing it every other minute today. Try slamming all the doors and if that doesn't work, google "1995 ford ranger beeping" for a post on how to modify that sensor.

Sep 08, 2010 | 1995 Ford Ranger Supercab

1 Answer

Drove aspire shut off at store now wont start cranks but not getting fuel

give the fuel tank a couple of hits with your foot all around the place and get someone to crank while you do it or you may even hear the pump work after you hit it with the ignition on check fuses first

Jun 06, 2010 | 1995 Ford Aspire

2 Answers

1995 ford explorer doesn't start, crank & cam sensors replaced

Does you fuel pump delivers fuel. Is it there a spark.

Dec 29, 2009 | 1995 Ford Explorer

2 Answers

1995 ford aspire cranks but won't start

replace your mass air flow sensor this should fix it.

Aug 09, 2008 | 1995 Ford Aspire

Not finding what you are looking for?
1995 Ford Aspire Logo

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides