Question about 1988 Plymouth Reliant

1 Answer

1988 Plymouth Reliant needs to be pulled somewhere...

My 1988 Plymouth Reliant needs to be pulled somewhere because it does not start but I need it fixed. I was told to look at my manual for the max speed that I can pull the car without messing the transmission up but I do not have a manual and cannot afford to get one. So does anyone know, maybe, the approx. speed that I should, for sure, keep the under while pulling it with another vehicle? Thanks for all the help.

Posted by on

  • anternidrumm Sep 13, 2009

    What is library sec 629?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 4,514 Answers

I think about 10-15 mi less than 30 mph-library sec 629 has more info

Posted on Sep 13, 2009

Testimonial: "It kinda helped me but it wasn't specific enouth and not worded correctly"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 plymouth reliant won't start when trying to start the flywheel just spins like crazy what would be the problem?


So the flywheel is spinning but the engine is not? Sounds like a detached flywheel. Hopefully it is broken bolts and not a broken crank.

Jan 28, 2014 | 1987 Plymouth Reliant

1 Answer

1988 plymouth reliant 2.5 starts runs rough and shuts off


Have you cycled the key for retrieving any engine trouble codes? Is "check engine" light on?

Dec 18, 2013 | 1988 Plymouth Reliant

1 Answer

My 1988 Plymouth Reliant has a skip in it, when I press the accelerator, it drives smooth and then randomly skips


If tune-up, (plugs and wires) fuel filter changed, throttle body cleaned etc, hasn't been done in a while, that would be a good place to start.

Jul 30, 2011 | 1988 Plymouth Reliant

1 Answer

Trying to locate the relay box for my plymouth reliant. Its a 1988, 2.5 liter engine. Fuel pump relay box. My fuel pump is not working and it was suggested to me to find and see if the relay may be the...


The fuse box is located on the bottom edge of the dash no the drivers side, there should be a small panel you pull out. Based on the age of the car, it is quite possible that you have a bad fuel pump. Try giving the tank a good rap with a rubber mallet or wooden broom stick and see if it starts. Sometimes the jolt frees up the pump.

Mar 04, 2011 | 1988 Plymouth Reliant

1 Answer

Where is the voltage regulator located on a 1988 plymouth reliant 2.2l


according to autozone.com, The voltage of all 1988-95 alternators is regulated by the Powertrain Control Module (PCM).

So it's part of the PCM and cannot be replaced separately.

Sep 21, 2010 | 1988 Plymouth Reliant

1 Answer

My 1988 Plymouth Reliant needs pulled somwhere....


buy manual and see max mph before trans is affectd

Sep 12, 2009 | 1988 Plymouth Reliant

1 Answer

1988 plymouth reliant shift cable keeps coming loose


Can only give you the british name which wont mean a thing in america .Automatic gear change cable .What i often do to keep old motors running like this till i can get the right parts ,is to use some thin wire and refit the connection then wire it together ,that will work for a while till the wire rusts through ,depending what bit has broke the gearbox or the cable end but if its the cable end then i should imagine its a new cable complete

Aug 29, 2009 | 1988 Plymouth Reliant

1 Answer

Changing the Fuel Filter on a 1988 Plymouth Reliant


MAKE SURE KEY IS OFF USE A BUCKET AND TAKE OFF LINES TO THE FILTER YOU WILL LEAK SOME THEN REVERCE THE SAME WAY BACK BUT MAKE SURE THE ARROW IS POINTED TOWARD THE ENGINE ON THE FILTER

Jul 27, 2009 | 1986 Plymouth Reliant 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...