Question about 2005 Jeep Wrangler

1 Answer

Front end wobble at 50 mph or when I hit a bump or pot hole in my 2005 Wrangler

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Your tie rod nut needs tightning, the extra play causes the front end to vibrate or wobble your vehicle and sterring wheel.

look under the car where your steering wheel gear box connects to the tie rod, see if the nut and carter key have slop in it.

if so, take the carter key out and tighten the nut and then replace the carter key as it was.

the test it on some bumps and potholes.

Posted on Sep 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

At 60 mph when you hit a bump then front end wobbles so bad you have to stop


i had the same problem and thought it was ball joint but turned out i needed a new stabilizer about $30 on ebay.

May 04, 2015 | 2005 Dodge Ram 2500 Truck

2 Answers

I have a 1993 Jeep Grand Cherokee Laredo. There is a "violent" vibration that occurs only when you are going 40-60 MPH and you hit a bump or pot hole on the highway. The front end begins to...


Vibration from about 40-60 mph is usually attributed to wheel balancing, but the onset when you hit a bump seems to indicate play in the steering linkages (tie rods etc) or suspension members and stabiliser bar rubbers but you had that all checked out, that brings us back to the wheel balancing.

Mar 17, 2011 | 1993 Jeep Grand Cherokee

1 Answer

I have a 2005 dodge ram 250 sometimes when I hit offset pot holes at about 60 mph the front end starts wheel hopining all the tie rods and king pins seem to be in good shape only have 62,000 miles on it


you have a condition called 'bump steer' which is caused by bent or damaged front end components. take a good look at the front end again if you are sure it is fine than get to an alignment shop to have it checked out. You may find that when they do a caster sweep of your front end there will be a problem with toe out on turns (TOOT) or steering axis inclination (SAI) cheers

Mar 13, 2010 | 1992 Dodge Ram 250

1 Answer

When i hit a pot hole at 50 mph or higher (my


Have the dealer tech run it through pot holes as well This may resolve your problem. Stablizer bushings maybe worn?

Jan 16, 2010 | 2008 Jeep Wrangler

3 Answers

2006 dodge ram front end shakes when hitting a bump at 40 + mph please help?


You have to make somebody to check the struts, or shocks, and also the axles, this situation is very dangerous because if the problem are the terminals or the axles, they can be broke while driving and you will lost control of the steering wheel... completely. I mean, no steering wheel working, on a car running...

Dec 29, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

My front end shakes when i hit a bump at 50 mph, the front tires


could be a bent rim ? have you changed the universal joints? how about the tie rods and stabilizer bar

Aug 13, 2009 | 2006 Jeep Wrangler

2 Answers

Bad Wobble at speeds over 40 or hitting small bumps in road


most of the time, it's the trac bar bushing. if it's worn, you can death wobble over 40 mph. replace it with a polyurethane bushing.

Jun 22, 2009 | 1993 Jeep Grand Cherokee

1 Answer

The front end and steering wheel shakes when i hit a hole or bump


This usually indicates a problem with the suspension components. Check for play in front end suspension, 1st thing I would check would be the steering damper, it's often overlooked, and could be the cause. If that checks out ok, jack up and check for play in wheels, which could be caused by worn ball joints, tie rod ends, wheel bearings. A lot of possibilities, generally play in any components can trigger the shaking you're experiencing when hitting a pot hole or bump. Good luck!

May 09, 2009 | 1988 Ford F 150

Not finding what you are looking for?
2005 Jeep Wrangler Logo

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...