Question about 1996 Ford Contour

1 Answer

Can not remove rear door liner in a 1996 Ford Contour. I need to replace electrical window.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 288 Answers

If you have removed all the screws try pulling on the bottom of door panel and look behind panel some have push in type some have lift up panel to remove.

Posted on Sep 13, 2009

Testimonial: "I need the information that was sent but I need to back up 1 step. I can do nothing until the door handle assembly is removed."

  • lintner randy Sep 16, 2009

    most cars have covers that pop fit over the door handle you need to remove the cover to gian acess to the screw by the handle you dont need to remove the handle if it is riveted to the door. hope this helps.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is my ign fuse located on my car


Below dash instrument panel, R16 ignition relay
98 Ford Contour SE Fuse Box Map
Fuse Panel Layout Diagram Parts: passenger side air bag, heater blower, interior lighting, heater blower motor, parking lamp, interior lighting, electric mirror, clock, wiper motor, ignition, reverse voltage protection, rear window defrost, engine management system, instrument panel illumination, radio, wiper motor, power windows, ABS module, backup lamp, brake lamp, door lock, main light, cigar lighter, electric seats,
link below should be the same as yours, press the helpful button

http://www.autofuseboxdiagram.com/1342-98-ford-contour-se-fuse-box-diagram

Jan 30, 2016 | 1999 Ford Contour

1 Answer

Where is my ign fuse located on car


Below dash instrument panel, R16 ignition relay
98 Ford Contour SE Fuse Box Map
Fuse Panel Layout Diagram Parts: passenger side air bag, heater blower, interior lighting, heater blower motor, parking lamp, interior lighting, electric mirror, clock, wiper motor, ignition, reverse voltage protection, rear window defrost, engine management system, instrument panel illumination, radio, wiper motor, power windows, ABS module, backup lamp, brake lamp, door lock, main light, cigar lighter, electric seats,
link below should be the same as yours, press the helpful button

http://www.autofuseboxdiagram.com/1342-98-ford-contour-se-fuse-box-diagram

Jan 30, 2016 | Cars & Trucks

2 Answers

All power windows not working in 1996 ford contour how do i find problem


The lights are on a different circuit than the motors. Check the fuse panel. It's a 40 amp fuse in position 21 in the fuse panel under the dash. Across the bottom of the panel are two rows of fuses. It's the third fuse from the left on the top row.
If you find the fuse blown, replace it and check the window operation. If it blows again almost immediately, then you'll need to get the car looked at by a shop, unless you are really familiar with electrical trouble-shooting, and have wiring diagrams for the car.

Oct 04, 2014 | 1996 Ford Contour

1 Answer

1996 Mercury Mystique Window


Here are the instructions:
    • Gently remove the door panel of your Contour, ensuring that you don't break the three door clips that hold it on. As you pull the panel from the door, support the panel from below. This will ensure that none of the wiring inside the door is damaged. Release the wiring from the components inside the door, including the power window mechanism, power lock mechanism (if equipped) and the stereo speaker. Place the door panel in a safe area with the clips so they are accessible when you are ready to replace them.
    • 2Remove the window glass by sliding it up and out of the door. Support the glass from the bottom so it doesn't drop and break. Window glass for a Contour can cost around $150 to replace. After you remove the glass, put it in a safe place. You may want to wrap it in old towels or blankets to protect it until you are ready to reinstall it.
    • 3
    • Unplug the wires from your Contour's window motor, and remove the screws from the window motor and regulator. Remove the power window motor and regulator from your Contour to make way for the new parts.
    • 4Install the new window regulator into the door, and replace the screws that held them in place.
    • 5Replace the window glass into the door, and connect it to your Contour's power window motor and regulator assembly.
    • 6Replace the door panel. Reconnect the wiring for the power window and power lock controls, and replace each clip that connects the panel to the door.

Jul 26, 2012 | 1996 Mercury Mystique

1 Answer

BENT THE RIGHT REAR AXLE ON MY 1996 FORD CONTOUR AND NEED TO KNOW HOW TO REPAIR IT


you don't repair it, you replace it. jack it up, remove the brakes, and all the brake assembly from that axle,, http://www.ehow.com/way_5731956_ford-rear-brake-replacement-instructions.html then remove the bearing cap,, cotter pin, and nut from the spindle , ( you might want to replace the wheel bearing at the same time due to the bad axle ) remove the axle bolts,, and shock bolts, from the axle beam. remove axle beam assembly

Sep 23, 2011 | 1996 Ford Contour

1 Answer

No Brake Lights on 1996 Ford Contour due to Combo Switch Failure.


please explain if this switch is the type that knocks out the brake light for the indicator ?? american style as i am a bit confused here as this system is illegal here ,if your having all this problem then rewire it and fit two auxilery lights for the indicators ,or new rear lights with seperate indicators in them

Aug 02, 2010 | 1996 Ford Contour

1 Answer

I cant open the back rear passenger side door on my 96 ford contour. Ive tried prying it open, I have tried to undo the the hinges and ive run out of ideas.I've tried open the inside door handle and...


remove the door panel and see which linkage rod is disconnected but to open door move linkage leaver by the rear of door and will move the latch opening the door

Jun 01, 2010 | 1996 Ford Contour

3 Answers

I need help with replacing the driver side window in a 2003 ford f-150,four door super crew cab truck.


Removal & Installation
Motor - Front Door
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch
  3. Remove the front door trim panel and watershield.
  4. Tape the window in the full UP position.
  5. Disconnect the window motor electrical connector.
    NOTE Support the window motor while removing the window motor retaining screws.
  6. Remove the window motor bolts and remove the motor.
  7. To install, reverse the removal procedure.
Rear Door
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch.
  3. Remove the rear door trim panel and the rear door trim watershield.
  4. Remove the door speakers.
  5. Tape the window glass in the full UP position.
  6. Disconnect the window regulator electric drive.
  7. Position the connector for the window regulator electric drive inside of the door.
  8. Remove the bolts.
  9. Separate the window regulator electric drive from the rear door window regulator.
  10. Remove the window regulator electric drive from the door.
  11. To install, reverse the removal procedure.

Motor & Regulator

3d4a07e.jpg

Fig. Front Door Trim Panel

7932e42.jpg


Fig. Rear Door Trim Panel-Crew Cab


Regulator - Power Windows

506866e.jpg

Fig. Window regulator arm nuts


db15984.jpg

Fig. Window regulator bolts

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch.
  3. Remove the door trim panel.
  4. Remove the door speaker.
  5. Remove the door watershield.
    NOTE Do not remove the window glass from the door.
  6. Remove the window glass from the window regulator.
  7. Tape the window glass in the full UP position.
  8. Disconnect the window motor electrical connector (power windows only).
  9. Loosen the window regulator arm nuts and pull the arm from the mounting position.
  10. Loosen the bolts and remove the window regulator.
  11. To install, reverse the removal procedure.

Hope helped with this. Good luck.

Nov 16, 2009 | 2003 Ford F150 Regular Cab

2 Answers

Drivers door glass replacement 1999 ford contour


REMOVAL


Remove the door trim panel.

Detach the door speaker.
Remove the speaker retaining screws.



Remove the door speaker.
Disconnect the multiplug.




Detach the watershield.
Using a plastic knife (disposable cutlery), cut through the Butyl strip to enable the watershield to be peeled back.
CAUTION: Do not touch the adhesive surface as re-bonding will be impaired.


Connect the window operating switch electrical connector.




Remove the window retaining bolts. NOTE: Align the window retaining bolts with the access holes.
Disconnect the battery ground cable.



Remove the door interior weatherstrip (power window shown


Remove the glass.
Lift the glass.
Tip the glass forwards and remove the glass.
INSTALLATION

To install, reverse the removal procedure

Jan 23, 2009 | 1999 Ford Contour

Not finding what you are looking for?
1996 Ford Contour Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...