Question about 1992 Subaru Legacy

1 Answer

Doors seif locking all the time wont stay unlocked

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Subaru Master
  • 4,336 Answers

Get to the bottom of this, the next step is a circuit hot when you do not want it.

Most of these issues happen in the door jamb. Are all of the switches looking non damaged? disconnect the switches one by one to eliminate them.

Move the bundle in the door jamb and see if you can affect the issue. There are no successul repairs in this area, replace at least the entire run throught the jamb, but ideally the whole loom that you have to get to replace the jamb portion.

Posted on Sep 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 KIA.DOOR LOCKS; When you unlock the doors with remote, the doors immediately lock again. With the key, door unlocks and stays unlocked. however, the feature when you turn key to the right two times...


intermittant is spelled intermittent. .... Ah, locking system. ... You will find a broken wire in one of the doors that are used to set the door lock.
Probably the drivers door return wire.

Oct 26, 2013 | 1998 Honda Civic

1 Answer

Mazda 6 2005 driver door jammed


if you talking about door latch wont let door close.try to reset all door locks.first if you cant get door close.work unlock button with remote or door switch.then hold open door handle while you flat screw driver pull up latch in door latch should stay up so door will close.once get door close.try resetting all door locks by sitting inside vechicle with all doors close.remove key from ignition.open drivers door.wait 24 seconds.turn ignition switch on and back to lock position 3 times.press and release drivers door courtesy light 3 times.ensure doors lock and unlock.if not wait 40 seconds and repeat procedure.if this procedure fails. you have problem in the door latch and lock mechanism inside the door itself.

Jan 04, 2013 | 2004 Mazda 6 Sport

1 Answer

Nissan Altima 96 doors wont stay locked.


REPLACE YOUR DRIVER SIDE DOOR LOCK MOTOR BEFORE YOU REPLACE IT DISCONECT IT FROM ELECTRICAL CONECTOR TRY LOCKING CAR IF IT WORKS THEN REPLACE THE LOCKING MOTOR LET ME KNOW MABY I CAN HELP IF YOU NEED ME TWO OK

Nov 13, 2012 | 1996 Nissan Altima

1 Answer

Car wont stay Running,Door wont Lock-Unlock, Radio dont work and Trunk Pop don't work


It appears that you have an electrical short somewhere. If you are mechanically inclined and have hours of time and electrical knowledge, good luck! Sometimes these problems can be easily found where the wiring harness runs through the firewall from the fuse panel under the dash to the engine compartment relay box. Vibrations of the engine over time on a vehicle over 10 years old will chafe the wires over time on places where the wires lay over body frame components. Also heat and time on a cars wiring harness over a decade can damage wiring in the engine compartment or along exhaust manifold underneath. Try looking in those places for visible damage before tearing out all the interior or dash.

Apr 23, 2012 | 2001 Pontiac Grand Am SE

1 Answer

Central locking not working, doors lock then unlock when just want them to lock


one of the door doorlocks is faulty the door lock link switch thinks the door is open and wont allow it to stay locked it can be plugged into the diagnostic socket and that would tell which one is faulty or the slow way is to disconect each door lock one by one until it stays locked then u will no which one is faulty

Apr 19, 2010 | 2000 Ford Focus

1 Answer

Cant get back door to stay closed . The lock is stuck in locked position I think and the door is open. When I go to close it, it is'nt staying closed. Had to duck tape it to stay closed. LOL! I keep...


It sounds to me ( correct me if I'm wrong ) like the door latch on the side vertical edge of the door is in the LOCKED POSITION. In order to unlock it perform the following. First electrically with the LOCK button UNLOCK the locks. Now with one hand hold the OUTSIDE DOOR HANDLE IN THE OPEN POSITION, while at the same time FLIPPING OPEN THE LATCH. All Done . Now you can close the door. Hope this helps

Jun 27, 2009 | 1997 Chevrolet Lumina

1 Answer

Lift gate door will not lock or unlock


Check out the following link, it is a step by step process to getting the fix...
http://www.chefseattle.com/blog/site-news/suburban-rear-liftgate-wont-unlock-how-to-fix/

Jun 13, 2009 | 2008 Chevrolet Suburban

1 Answer

Doors wont all lock at the same time on my '95 saab 9000cs. i have to manually lock them individually. My dashboard lights flicker, sometimes the lights will stay on and sometimes i have to tap the switch...


When you use your remote or insert your key in the Drivers Front door all the door locks should work at the same time by the door lock motors electrically. If you have to manually unlock the door because it will not lock or unlock by the lock motor, you need a door lock motor. The drivers and passengers front doors can unlocked with the key manually only. The rear doors you have to pull up the latch. 
If NONE of doors unlock electrically with the remote or drivers door lock, intermittently or all the time, you will need a Central Locking Electronic Control Module. Pressing the remote button you will hear the "beep", but no door locks will fire at all. 
If you have a few odd door locks not working intermittently or not at all, you will need a new door lock motor for each door lock that malfunctions. You can hear if the door locks are working electrically. Yes, they are common problem. 
If you can hear the door lock motor working but the door still doesn't unlock you need to take the door panel off and lubricate the door latch assembly and work the lock, loosening it up. This is common as well.
Sometimes a bad door lock motor can blow the central locking fuse. You will notice it because it will take a second or two longer to lock and unlock compared to the others. If the door lock motors seem fine, install a the next step up in amperage fuse. (From 15 AMP to a 20 AMP)

Apr 09, 2009 | 1997 Saab 9000

1 Answer

2004 CHEROKEE, WONT RECONIZE DRIVERS DOOR OPEN,


its the ground wire for the driver door, and posably an ornge one, in the black shielding to the door they rip all the time but yet for some reason jeep has yet to make a recall. any who you disconect the battery then pull the shielding back and patch the wires together.

Dec 14, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
1992 Subaru Legacy Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...