Question about 2006 Ford Crown Victoria

1 Answer

06 crown vic stalls out when full throttle depressed , codes P0600,P2105,P2107,P2110 throttle body replaced, ecm replaced, reprogrammed , wiring checked , pedal assy. changed it was at several dealers and not repaired .

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

Put these codes directly one at a time on google search and you will find the result

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Working on 2003 Lincoln LS 3.0. code p2110; p2107. Customer replaced throttle body


P2110 - Throttle Actuator Control System - Forced Limited RPM. Throttle actuator control system is in FMEM mode of forced limited RPM.
  • PCM damaged
  • Cross wired TACM motor
DTC indicates only that FMEM condition exists, and can be set incombination with DTCS P2100, P2101, or P2107, meaning the ETB faults should be repaired first.
P2107 - Throttle Actuator Control Motor Processor. The ETC control area of the PCM failed self test. Fault could be the result of an incorrect TP command, or the TACM wires shorted together.
  • TACM wire shorted together
  • TACM circuit wires shorted to pwr
  • PCM damaged
  • ETB damaged
An (TACM) circuit PID reading may indicate a fault if available
DV21 CHECK ETC MOTOR FOR SHORT OR OPEN
  • Remove ETC motor harness connector.
  • Measure the resistance between the TACM + and TACM - pins, through the motor.
Is the resistance less than .8 ohms, or greater than 1000 ohms?
Yes No Replace Throttle body assembly. note: Clear DTCS and rerun self test, if DTCS (P2100, P2106, P2112), or (P2100, P2106, P2111, P2112) are output GO to DV22 , for (P2100, P2106, P2107) GO to DV23 , and for (P2100, P2106, P2107, P2111, P2112) GO to DV24 , and for DTCS (P2101, P2106, P2110, P2111, P2112) GO to DV25 . GO to DV22 . DV22 CHECK ETC MOTOR HARNESS FOR OPEN
  • Remove PCM harness connector.
  • Measure the resistance of the TACM+ circuit between the PCM and TACM harness connectors.
  • Measure the resistance of the TACM- circuit between the PCM and TACM harness connectors.
Is the resistance less than 5 ohms?
Yes No GO to DV23 . Repair open circuit. DV23 CHECK ETC MOTOR HARNESS FOR SHORT TO GND, PWR, ETCREF, AND ETCRTN
  • Measure the resistance between the TACM + pin and battery gnd.
  • Measure the resistance between the TACM - pin and battery gnd.
  • Measure the resistance between the TACM + pin and battery pwr.
  • Measure the resistance between the TACM - pin and battery pwr.
  • Measure the resistance between the TACM + pin and ETCRTN.
  • Measure the resistance between the TACM - pin and ETCRTN.
  • Measure the resistance between the TACM + pin and ETCREF.
  • Measure the resistance between the TACM - pin and ETCREF.
Are both resistances greater than 10K ohms?
Yes No GO to DV24 , for P2101, GO to DV25 . Isolate and repair short circuit. DV24 CHECK ETC MOTOR HARNESS FOR CIRCUITS SHORTED TOGETHER
  • Measure the resistance between the TACM + pin and TACM- pin.
Is the resistance greater than 10K ohms?
Yes No GO to DV25 . Isolate and repair short circuit. DV25 CHECK FOR CROSSWIRED ETC MOTOR HARNESS
  • Measure the resistance between the TACM + pin and TACM- pin.
Is the resistance greater than 10K ohms?
Yes No GO to DV26 . Properly wire the TACM per TACM and PCM connector diagrams. DV26 SELF TEST VEHICLE
  • Key On Engine Off.
  • Clear DTCS.
  • Cycle accelerator pedal to the floor and back several times.
  • Self Test vehicle noting any DTCS.
Were there any DTCS related to the ETC system?
Yes No Intermittent fault, GO to Z1 Replace PCM.

Oct 13, 2017 | Lincoln Cars & Trucks

1 Answer

What is a code 872


What Is Ford Codes P2104 P2107 P2110? Askiver - Questions

https://www.askiver.com/what-is-ford-codes-p2104-p2107-p2110.html
2008 Ford F150: P2107 and P2110 Log In Log In: User Name: Remember Me? .... DTCcodes P2104, P2112 - Ford Shelby GT500 ForumDTC codes P2104, P2112 Performance Modifications ... Two are FORMBY FORD TEL 01704 872 108 , .

Nov 04, 2015 | Ford Shelby GT500 Cars & Trucks

1 Answer

When driving 2006 LINCOLN LS the car will drop down to 20mph without warning, Why is this


Google search got this:
Ok so I looked up the codes and P2107 is for "Throttle Actuator Control Module Processor" and P2110 is for "Throttle Actuator Control System - Forced Limited RPM"
I think P2110 is thrown and active because there was an error with the throttle body module/part. There is a list of causes for P2107:
Possible causes
- Foulty Throttle Body
- Faulty Throttle Actuator Control Module
- Throttle Actuator Control Module harness is open or shorted
- Throttle Actuator Control Module circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
test the electrical connection on the part e to see if it's loose or corroded at all.
I'm also going to change my coil packs. Maybe if one of those are going out, the computer might throw this code too? Wouldn't think so, but maybe.
What was happening is, when I accelerated, sometimes the car would just die (well, I thought it was dying but was actually going into that forced Limited RPM mode). If I turn the car off and start it back up, all good again.
The throttle body is 422.94 OEM, so... yeah...
Read more: http://forums.automotive.com/70/9635379/general-auto-repair/04-lincoln-ls-error-codes-p2107-p2110/#ixzz3Ssbd2WnJ
Follow us: @MyAutomotive on Twitter ' AutomotiveCom on Facebook

Feb 26, 2015 | 2006 Lincoln LS

1 Answer

Stalling


first scan for engine code.Codes P0600, P2105, P2107.
throttle body is common problem with ford
second connect fuel pressure gauge and drive
General Specifications
Item Specification Fuel tank capacity 71.9L (19 gal) Fuel Pressure Hot restart 448-482 kPa (65-70 psi) Key ON Engine OFF (KOEO) 140-415 kPa (20-60 psi) Key ON Engine Running (KOER) 170-280 kPa (25-40 psi)

Mar 23, 2014 | 2006 Ford Crown Victoria

1 Answer

2009 Ford Fusion codes 2107,2110 car slows to 30mph and will no longer accelerate


Well, those codes definately are related to why your vehicle will no longer accelerate!

P2107 is "Throttle Actuator Control (TAC) Module Processor"
This code means that the TAC portion of the Powertrain Control Module (PCM) has failed the self-test.

Posiible causes:
> TAC motor circuit harness shorted to ground
> TAC motor circuit harness shorted to voltage
> Damage Electronic Throttle Body (ETB)
> Damaged PCM

P2110 is "Throttle Actuator Control (TAC) Forced Limited RPM"

This code is informational only. It sets in conjunction with other throttle actuator control codes (like P2107 above). It is just letting you know that the PCM is limiting RPM due to a TAC malfunction, (So it doesn't do a "TOYOTA" on you and run away!"

Jul 06, 2011 | Ford Fusion Cars & Trucks

1 Answer

Car goes into failsafe mode; codes p2110 and p2107


Bad ignition coil,spiking the PCM,spike comes back on TPS Sensor,then to PCM again,putting the car into ETC Failsafe,and you can only go 6 MPH.

If the coils are not the issue,then the 2110 & 2107 come into play, and you spend $700,00 just for a new throttle body. The motor in it is not replaceable as of 2010,may be some day
In that case you better put it on yourself. Only (4) 10mm bolts,but you have to drain a little coolant,as it goes thru the throttle housing

May 13, 2010 | 2004 Lincoln LS

2 Answers

My 2005 lincoln LS has 2 obd11 codes they are: P2107 and P2110 what does this mean?


concern is not the throttle body or tp sensor
coils are causing rf interfernce which causes pcm to get an erratic signal and shut down throttle response
you may also notice a miss/hesitation attimes on hard accel and this is when throttle may shut down?
rec stress test all coils with an oscilliscope-common concern on this vehicle

May 04, 2010 | 2004 Lincoln LS

1 Answer

2004 Lincoln LS 3.0 engine stall codes p2107 p2110 have replace lots of parts.


hi your problemis your throttle actuator control position sensor its a small piece that goes in the front of the engine cost about 120usd

Nov 19, 2009 | 2004 Lincoln LS

Not finding what you are looking for?
2006 Ford Crown Victoria Logo

1,261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...