Question about 2003 Toyota Corolla

1 Answer

'03 Toyoya How do I change the Starter in a '03 Toyota Corolla?

Posted by on

  • Superbovine May 11, 2010

    What engine model?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 333 Answers

I'll presume it's a US 1ZZ:

  1. REMOVE ENGINE UNDER COVER RH
'03 Toyoya - 979dc2f.gif
  1. REMOVE STARTER ASSY
    1. Disconnect the starter connector.
    2. Remove the nut and disconnect the starter wire.
    3. Remove the 2 bolts and starter.
  1. INSTALL STARTER ASSY Torque: Bolt 37 Nm (378 kgf.cm, 27 ft.lbf) Nut 9.8 Nm (100 kgf.cm, 7 ft.lbf)

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1993 toyoya corolla and it runs beautifully. I have had the occasional overheating problem, these have always being diagnosed and fixed. However this time around we have changed hoses, done...


Hello, shawlorde and thank you for asking your question on Fixya!

Here is a simple process that will walk you through a few steps that will pinpoint the overheating problem on your
1993 Toyota Corolla, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people in your exact situation.
How to diagnose your overheating
1993 Toyota Corolla

Get more great money saving tips and tricks about your vehicle from: twitter.com/acoates23234

Thanks for the vote, and good luck!

Dec 29, 2010 | 1993 Toyota Corolla

2 Answers

I have an 03 Toyota Corolla "S" and it was running fine then an hour later I go out to start it and it don't start. All you hear is the fuel pump and just one click. Whats wrong?


sounds like your starter is going bad. check the battery connections first. make sure they are tight with no corrosion. Maybe your battery is getting weak. try a jump start. You can have both tested at most auto parts stores.

Sep 19, 2010 | 2003 Toyota Corolla

1 Answer

Where is the starter located at on an 03 toyota corolla


the starter is directly connected to the transmission of the car. its easier to see from under the car.

Apr 27, 2010 | 2003 Toyota Corolla

1 Answer

Need a fuse box diagram ( radio ) for 2002 chevy prizm/toyoya corolla


toyota corolla has two fuse boxes which contains the diagram on its cover.
1. inside the engine compartment near the left fender
2. undernneath the instrument panel near the left hand side of steering wheel.

Apr 11, 2010 | 2002 Chevrolet Prizm

1 Answer

Change starter.


two wires at starter and two mounting bolts. starter is located on top of transmission. but first disconnect red battery cable. simple!

Jan 03, 2010 | 1993 Toyota Corolla

1 Answer

Which gas should i use in my 2000 toyoya corolla?


your car is set up to run on regular blend, anything hogher is just dipping into your pocket for nothing

Nov 30, 2009 | 2000 Toyota Corolla

1 Answer

I have a 2003 toyota corolla with a bad starter how do i remove?


    1. Remove or disconnect the following:
    2. Battery and tray. On models equipped with an air bag, work must NOT be started until at least 90 seconds have passed from the time that both the ignition switch is turned to the LOCK position and the negative cable is disconnected from the battery.
    • Coolant reservoir
    • Reservoir hose from the radiator
    • Right side under cover
    • Wiring clamp
    • Wiring from the starter
    • Starter
  • To install:
    1. Install or connect the following:
      • Starter
      • Starter wiring and nut
      • Starter connector and wire clamp
      • Right side engine cover
      • Radiator reservoir and hose
      • Battery and tray
    2. Check the cooling system and top off if necessary

    Oct 26, 2009 | 2003 Toyota Corolla

    1 Answer

    2002 Toyota Corolla starter change out


    Disconnect the battery.

    Remove the lower plastic covers to aid in access.

    Remove the battery cable lug from the starter and the signal wire.

    Remove the two 14mm bolts holding the starter on and lower out the bottom.

    *sometimes it helps the clearance to remove the oil filter.

    Sep 14, 2009 | 2002 Toyota Corolla

    2 Answers

    WHERE IS THE LOCATION FOR THE SPARK PLUG FOR 2002 TOYOYA COROLLA CE. .


    All vehicles are different but the concept is the same. The spark plug is mounted into the cylinder head.
    http://www.2carpros.com/topics/sparkpl.htm

    Aug 18, 2008 | 2002 Toyota Corolla

    Not finding what you are looking for?
    2003 Toyota Corolla Logo

    Related Topics:

    401 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8270 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...