Question about 2004 Honda Accord

1 Answer

I need to replace the halogen low beam bulb on the driver side of a 2004 Honda Accord. There is no access panel in the wheel well. So, to get at the bulb from the top, do I need to remove the air cleaner?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

You can reach in behind grill to access headlight. THere will be a plastic ring that turns loose, then bulb and socket can turn and pull out.

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda troubleshooting


Sometimes, Honda's have a fuse for each headlight. I would start with checking those.

Jul 12, 2014 | 2004 Honda Accord

2 Answers

Honda accord keep burning low beam headlights


Sounds to me like you need to reset the headlight housings... maybe they are vibrating very badly. ... OR, easy fix, get NEW headlight housings on EBay and install.

Nov 28, 2011 | 2004 Honda Accord

1 Answer

Low beam drivers side only not working. It is a 2004 Honda Accord LX. Fuses and bulb both are ok. No problems with high beams. Any suggestions?


you may have an issue with the bulb socket itself, pull the bulb out and look for corrosion in the socket. If their is corrosion clean it usiing battery terminal cleaner and then coat with bulb grease (both available at any auto parts store. If the Bulb socket is in good condition then it may be the headlight switch itself or the wiring harness to the light.

Sep 15, 2010 | 2004 Honda Accord

1 Answer

How do i change my front headlght bulb


I replaced both stock 9006 low-beam bulbs on my 2004 Accord. Despite much info on removing fenderwell splash shields, I was able to open the hood, and reach the passenger side harness, remove plug, twist and remove bulb and reinstall- no problem. Driver's side required removing the battery, but same procedure. No problems, no cuts or bruises. Owners manual is unclear, Hayes 2003-05 Honda Accord repair manual is wrong, and the dealer charges $29.95 per bulb installed. Took me 10 minutes. Tried to save the radio settings with a 9V battery in the power plug (memory-saver) but that didn't work

May 07, 2010 | 2003 Honda Accord

1 Answer

Is the low beam headlight bulb difficult to replace from under the hood on a2005 honda accord


I just replaced both low beam headlight bulbs on my 2005 Honda Accord. After reading the owner's manual and trying to remove the wheel well inserts (and breaking a couple of those clips in the process), I gave up on that approach and was able to change the passenger side and driver side low beam bulbs from the engine compartment under the hood. On the passenger side, fit your arm between the front of the car and the hose that is above the headlight. You should be able to reach the bulb, disconnect the electrical connection, turn the bulb 45 degrees counterclockwise to remove it, insert the new bulb turning it 45 degrees clockwise to secure it in the hole (be careful not to touch the bulb), and reconnect the electrical connection. I loosened the 3 screws that secure the bulb to make it easier to put in the new one, but that probably isn't necessary. My hand was scraped a bit doing this, but it was not too bad. On the driver side, remove the battery hold-down clamp (there is no need to disconnect the battery connections). Reach into the fender (shine a light there so you can see the bulb connection) and you should be able to reach the bulb and replace it similarly to the other bulb. You may have to move the battery slightly to get your arm in there. Replace the battery hold down clamp when you're done. I accidentally dropped the old bulb in the wheel well, but other than that it went pretty smoothly. Good luck.

Jan 03, 2010 | 2005 Honda Accord

2 Answers

One high beam works one doesn't, gauge cluster does not light up


you say you replaced both bulbs, you mean right and left or both the high beam and the low beam on left side?could be a bad ground for the left headlight. there should be some ground wires there near the headlight, LF corner under hood. without a wiring diagram here at home,I am not much help.

Sep 26, 2009 | 2000 Honda Accord

1 Answer

2004 IS 300 - does it have HID or Halogen low beam lightbulbs?


Your low beam is a HID bulb, number D2R, and your high beam is a halogen 9005 bulb

Jul 27, 2009 | 2002 Lexus IS 300

1 Answer

What size bulb is an audi s4 headlight and fog light?


SYLVANIA H7 SILVERSTAR HIGH PERFORMANCE HALOGEN HEADLIGHT BULB -- 55 Watts, Single C-8 filament for use as either high beam or low beam; 100 percent legal halogen headlight bulbs; Features the whitest and brightest light colour similar to daylight for safer night driving; Meets all US FMVSS 108 and Canadian CMVSS 108 requirements. Fits Driver or Passenger Side Driver or Passenger Side Fits the following vehicle/s
2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L RAMPAGE FOG LIGHT, BLACK METAL HOUSING, With round clear lens; Includes 100-Watt H3 halogen bulb, one lamp and a single bolt mounting system; Provides better illumination Fog Light

  • Fits the following vehicle/s: 2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L;

Jun 24, 2009 | 2004 Audi S4

3 Answers

REPLACEMENT OF [LOW BEAM] HALOGEN BULB IN 2004 Buick LeSabre


I just Replaced a Low Beam Light bulb on a 2005 Buick La Sabre.

If You use a Metric socket and Remove the Two Silver bolts Attaching the headlight Assemble onto the metal surrounding the the lamp assembly it comes out to the front. This makes it much easier to access the bulb. Twist it counerclockwise & it comes out by pulling gently on the bulb. Then by realeasing a tab that is the socket holder bulb can be removed & replaced with a New #9006 low beam halogen light bulb. Wrap a Paper towel around the bulb & do NOT touch it with your bare hand as this wiil ruin a halogen bulb,

Jan 22, 2009 | 2004 Buick LeSabre

Not finding what you are looking for?
2004 Honda Accord Logo

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...