Question about 1999 Daewoo Lanos

1 Answer

What size is the welsh plug on a daewoo lanos 1.4 1999 model. I have a cracked plug behind No 1 cylinder. The auto parts shop can't help me with the correct size.......

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 811 Answers

Pull plug and take to auto parts store

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Welsh plug size


As there are around 4 sizes of welsh plugs used It is best if you measure the leaking one or take it out and use it as a sample

Dec 04, 2013 | 1999 Daewoo Lanos

1 Answer

Miss on #4 cylinder. Changed plugs,wires,and coil pack also water coming from radiator cap.


k i notice you said changed plugs but did you perhaps gap the plugs to suggested gap. you can find it in your manual and buy a spark plug spacer at any auto parts retailer.

Feb 25, 2011 | 2000 Daewoo Lanos

1 Answer

Spark plug order installed new plugs and leads but lost the order


For the 2002 Daewoo Lanos:
Includes ALL Models:
S and SX Sedan
S and SE Hatchback

All have the 1.6L DOHC In-Line 4-Cylinder:
Firing Order:
1 - 3 - 4 - 2

Cylinders:
..........(back)..........
|...1....2....3....4...|
.........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Jul 03, 2010 | 2002 Daewoo Lanos

1 Answer

I snapped key in bad weather have daewoo lanos


snapped key into what lock cylinder or ignition switch or do you have both ends of the key itself or not ?

if you have one end stuck in either lock / ignition cylinder you can try using a welders torch cleaning tip kit it contains many various sized brushes and files etc which will allow you to get in beside the broken end of the key and wiggle it out .,,,any parts store should have them ...

Feb 10, 2010 | 1999 Daewoo Lanos

1 Answer

2000 Daewoo Lanos intermittant misfire trouble code


check fuel filter and check fuel for water or contaminents
then check fuel pressure with gauge also while driving
may have pin hole in leads - spray water with salt solution over HT leads while engine running and then rev to see or here spark jump(missfire)
recheck spark plugs - did you crack any on installation/removal/installation?
what are the codes and description if stored?
what is engine live data parameters like do they look normal (right specs for range/operation)?

Jul 27, 2009 | 2000 Daewoo Lanos

1 Answer

Heat set


Any dealership or good autoparts store.
might pay to get the head crack tested and machined as well , also get the radiator cleaned.
Think about the timing belt and related bits while your there.

Jun 26, 2009 | 2000 Daewoo Lanos

1 Answer

How do I check ATF in a 2000 daewoo lanos as there is no dipstick.


Be sure that transmission fluid temperature is at least 104° F (40° C). Models with 2.2L engine: To access check/fill plug: In the engine compartment, remove clamp from air hose behind cooling fan. Separate air tube from the hose and push the tube back towards the transaxle. Remove the clip holding the two power steering lines together. All Models: From underneath vehicle remove the transaxle check/fill plug with engine running. Fluid level should be even with hole. Add fluid as needed until fluid flows from hole. Replace check/fill plug and torque to 9 ft. lbs. (12 Nm).

Hope this helps,

Dave

Mar 02, 2009 | 2000 Daewoo Lanos

1 Answer

Replaced timing belt not running right


The Lanos engine are an interference engine. If you have bent valves, remove a plug wire one at a time and see if there is no change in the idle. My guess, one of them isn't going to change anything. That would be the cylinder that has the bent valves in. I had a Lanos in my shop with a broken timing belt and the head had several bent valves. I wouldn't be surprised at all if you also have bent valves.

Jan 29, 2009 | 1999 Daewoo Lanos

1 Answer

Parts for a 1.5 engin


At auto part store.

Aug 07, 2008 | 1999 Daewoo Lanos

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...