Question about 2004 Mitsubishi Endeavor

2 Answers



Posted by on

  • Colin Stickland
    Colin Stickland May 11, 2010

    please explain in queens english what you mean by ROTORS do you mean rear brake discs or have you a helicopter to beat the traffic


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 333 Answers

Take the wheel off.

Remove the two 14mm bolts holding the caliper bracket on.
They are the two farther inboard, behind the hub.

Slide the caliper and its bracket off the rotor and support it so you do not strain the brake hose.

Slide the rotor off.

If the rotor is stuck/rusty, you take take a hammer and tap on the hub section of the rotor to loosen it.

Posted on Sep 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If the rotors are really rusted on, screw two metric 8 bolts into the small holes on the front of the rotors (next to the wheel bolts). As the rotor breaks lose you should hear a pop. Maybe even a pop for each bolt.

Posted on Jul 30, 2012

  • Cubic Jul 30, 2012

    Meant to say M8 or 8mm bolrs


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Clunking sound in the rear end. When you hit a bump the back end goes all over the road . 2004 endeavor.

sounds like you need new shockers(must be done in pairs)when off, check all rubber bushes/linkages.

May 10, 2010 | 2004 Mitsubishi Endeavor

1 Answer

Trying to remove the front rotors that is securing the rotor to the wheel assembly. Need to know the name of he tool that release the philip head screw. Mitsubishi Endeavor 2004

If you can see the head of this screw, drill it out and retap the threads with M8 x 1.25tpmm. Due to the heat these seize often.
It best to use a depth stop set at 12mm below surface to prevent possible damage to the hub or bearings. Manual Hammer driven impact drivers are often effective and sold by harbor freight cheap.

Jun 27, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Front rotors on 2004 mits endeavor

you turn them left to loosen and a little bit of heat is the best way to get them loose and when you put it back together make sure to put anti seize on them

May 05, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Can't get rear rotors off...

there should be two holes in the rotors that will be threaded. send two bolts in them a little at a time to push the rotor away from the backing plate.

Apr 22, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Changing front brakes on 2004 mitsubishi endeavor

if you have floating rotors in the front then no.

But if you have locking hub units in the front then yes the bearing will have to come apart.

But if there is only one nut and you can see the threads through the wheel then no you have floating rotors, and sometimes are rusted to wheel bearing and are a pain to get off. Call the parts department and ask whether these are floating rotors or not. This will clarify everything

Mar 03, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Im trying to install a new rear hub assembly and cannot get the rotor off. Any sugestions.

Remove the rotors. Rusted rotors will most likely stick to the car due to the iron oxidizing and bonding to the mount of the wheel. If this happens, you are going to need a little force to remove the rotor from the wheel. With the car properly secured, get a single-hand sledge mallet (rubber preferably to protect the rotor). If you don’t have a rubber mallet, use a block of wood to absorb direct hits. Start at the top of the rotor and tap the edge of the rotor gently as you move clockwise around the rotor. Once loose, remove the rotor from the car.

Feb 17, 2009 | 2004 Mitsubishi Endeavor

1 Answer

2004 mitsubishi endeavor passenger rear window off track

Yea its actully quite simple, but expensive. The regulator needs to be replaced. I have already replaced my right rear, but I think my driver side is going out also, sounds like it anyway.
Thank God I bought a third party warrnty and they took care of everything. Zurich is the name of the company. I purchased the one with no deductible. Anyway I wish I had a better solution-but its awful hard to do your self.

Sep 29, 2008 | 2004 Mitsubishi Endeavor

1 Answer

2004 endeavor

Remove Endeavor Rear Panel

On the side panel there is a cargo hook with a 10mm bolt. Take that bolt out. On the floor panel there are 2 cargo hooks -- also 10mm. Take them out and remove floor panel. Fold seat forward and you should have access to 5 or 6 bolts -- also 10mm. Remove them then pull the panel out slightly and disconnect the cig ligthter and that should solve your issue.

Jun 21, 2008 | 2004 Mitsubishi Endeavor

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

681 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides