Question about Chevrolet 1500

Open Question

When the switch is on the brakes won't work when it is off they work.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why it will not go into gear?


check to see if the brake lights are working. some cars have a lockout for the gear shifter that won`t allow you to shift out of park if they are not working. it is wired into the brake light switch so when the switch or fuse is not working then the car won`t shift out of park.

May 26, 2014 | 2006 Chrysler Pacifica

2 Answers

Brake lights won't work


Check the voltage or the connection.
__________
Multi-Cardiag M8 CDP for car and truck

Jun 05, 2013 | Cars & Trucks

1 Answer

2001 jeep wrangler. Brake lights won't work but


Check the brake control switch situated just above the break pedal arm under the dashboard. Could be a wire loose or unplugged or the switch itself could be faulty

Mar 07, 2013 | Cars & Trucks

1 Answer

Brake lights won't turn off after releasing brake


Do you have cruise control? Does it work? If it doesn't then most likely you need to replace the brake light switch. The switch can be found on the brake pedal assembly.

Jul 01, 2012 | Toyota T100 Cars & Trucks

2 Answers

My 1997 rodeo brake lights won't work


Have you replace or tested the brake light switch at the brake pedal arm under the dash? If not do so, it is likley the problem.

Jan 25, 2012 | 1997 Isuzu Rodeo

1 Answer

Car will not go into gear while running


Check your brake lights. There is a switch on the brake pedal that actuates a release solenoid for the shifter. If this switch is bad, it won't shift out of gear and most likely the brake lights won't work.
Replacing this switch should fix your problem.

Aug 25, 2011 | 2008 Dodge Caliber

1 Answer

Shift lever lock won't release when brake pedal is


do the brake lights work? most of the time the problem is a broken wire at the brake light switch under the dash on the brake pedal. the ECM does not see the signal from the switch so it won't allow the car to shift from park.

Jul 19, 2011 | 1992 Lincoln Town Car

1 Answer

I replaced a cracked rear tail light with an after market new light. Now the brake light won't work but reverse lights and directional signal do. The bulbs are fine as I've moved them around and...



  • If there are no brake lights period the check the stop switch (brake light switch)
  • This is attached to the upper part of the brake pedal itself. Should be a little wire off of it. When that goes bad the brake lights will not work at all.
  • Please note that the fuse for "brakes" is ABS only and has no bearing on the brake lights themselves working.
Regards, Tony

May 30, 2011 | 2003 Jeep Grand Cherokee

1 Answer

When brakes applied brake light won,t work


If it just the brake light switch, should be under a $100.00.

Jul 21, 2010 | 1994 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...