Question about 2001 Toyota 4Runner

1 Answer

Getting to front turn signal bulb on 2001 4runner

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 333 Answers

There is a vertical screw holding the light in (there is a plastic bracket extending inwardsfrom the housing).
Once that is out, give the light a abrupt hit with the palm of your hand in a forward motion and the rear claw will release, and the housing will slide forward out of the car. Then you can change the bulb.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 dodge durango left turn signal works right turn signal does not


have you checked the bulbs front and back. to see if they work, bulb check. then it sounds like you might have a bad signal flasher that only works the left side and not the right side. or if a bulb at the front or the rear gets bright but not the opposite bulb on the same side then you may just have a bad bulb or socket or power to the socket when doing the bulb check.

Mar 06, 2014 | 2002 Dodge Durango

1 Answer

Both of the turn signals do not work. The hazard lights only work in the back. I looked at the fuzes on the passenger side, and they are still good. What can I do to get them to work?


It sounds like you have at least two bulbs out in the front. I suspect that both turn signals did not stop at the same time? Check the front bulbs. Many turn signal bulbs have two filiments; one for parking lights and the other for turn signals. The same filiment is used for turn signals and hazards.
Another possibility is that there is a bad or broken ground wire in the front?
Finally, it could be the turn signal switch.

Apr 05, 2011 | 2000 Buick Century

1 Answer

How do you change a front signal bulb on a 2004 accord


Front turn signal bulb replacement

1. Remove the inner fender
2. Disconnect the 3p connector from the front turn signal/side marker light.
3. Turn the bub socket ( 45 degree ), counterclockwise to remove the bulb.
4. Install a new bulb in the reverse order of removal.

Apr 12, 2010 | 2004 Honda Accord

1 Answer

I have a left front clearance light out how do you get it out 1


Signal and Marker Lights REMOVAL & INSTALLATION Front Turn Signal and Parking Lights
  1. Disconnect the negative battery cable.
  2. At the rear of the front bumper, turn the bulb socket 1⁄4 turn and remove the socket from the parking brake housing.
  3. Remove the bulb from the socket; if necessary, replace the bulb.
  4. If lens replacement is necessary, remove the retaining bolts and remove the lens from the bumper.
  5. To install, reverse the removal procedures. Check the turn signal/parking light operations.
Fig. 1: Common front turn signal/parking light mounting

d16c14b.jpg
Fig. 2: Twist and remove the bulb socket from the back of the turn signal/parking light lens

8b774bd.jpg
Fig. 3: If lens removal is necessary, loosen and remove the retaining bolts

09f4811.jpg

Jul 24, 2009 | 1992 GMC Sonoma

3 Answers

Right turn signal flashes fast. Front bulb appears to be burned


There are 2 bolts on the top corners of the bulb lens that needs to be removed then the lens pops right out and you can change the bulb.

Apr 06, 2009 | 2006 Pontiac Montana

2 Answers

Signal bulb on 2003 buick regal


To change front turn signal –
open the hood; look in back of headlight; two white clips; pull straight up, and then whole headlight comes out including turn signal; it is all one unit; remove rubber cover, then you take bulb out of unit. Mechanism that bulb fits in will need to be turned clockwise (looking from the front) and pulled to get it out of the larger unit holding all lights. Be sure and put rubber cover back on before re-inserting the two white clips.

Mar 16, 2009 | 2000 Buick LeSabre

1 Answer

Change front turn signal


You have to remove the signal unit from the bumper using a normal " + " screwdriver then twist the bulb holder at the back of the sinal unit.

Nov 23, 2008 | 1991 Honda Accord

1 Answer

How to change front driver side turn signal bulb


For Front turning signal, you need to remove the whole head light system to get to turn signal. 4 screws attach it to the car's body. Make sure to remove the lamps first and disconnect the switch for the turn signal lamp. Just replaced it last week myself.

Oct 15, 2008 | 2003 BMW 5 Series

Not finding what you are looking for?
2001 Toyota 4Runner Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...