Question about 2008 Hyundai Accent

2 Answers

Check light is on continuesly

I have 2000 model, the check light is on as soon ignition is on and stays on untill the ignition/engine is on.Please suggest.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 75,222 Answers

There are over 200 faults that turn this ligfht on, this system is covered for 70,000 miles in most cases, have the dealer chaeck it , it will most likely be a emission warranty repair

Posted on Sep 12, 2009

Testimonial: "gr8!!! got the reply in less than 15 mins. Thnx :)"

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Its suppose to do that when you first turn the key all your lights should come on as a test for 1 to 2 seconds, then once those turn off your check engine light and stays on because the ignition is on but the engine is not running. with the ignition on the computer thinks the car should be running so its holding the light on but shortly after you start it the light should extinguish. hope i helped.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the service engine light mean on a 2015 Ford Edge


Service Engine Soon

If the Service Engine Soon indicator light stays lit after you've started the engine, the On Board Diagnostics system (OBD) has detected a malfunction of the vehicle emissions control system. Contact your authorized dealer as soon as possible.
If indicator light is blinking, an engine misfire may be occurring, which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration), and have your vehicle serviced immediately.*
The Service Engine Soon indicator light illuminates when the ignition is first turned on (prior to engine start) in order to test the bulb, as well as indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing.
Normally, the Service Engine Soon light will stay on until the engine is cranked, then turn itself off if no malfunctions are present. However, if after 15 seconds this light blinks eight times, it means that the vehicle is not ready for I/M testing.Check this link out Gary.
https://owner.ford.com/how-tos/vehicle-features/dashboard-instrument-cluster/warning-lamps-and-indicators.html

Jul 19, 2017 | Ford Cars & Trucks

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

1 Answer

I have p1320 code in my 2000 maxima


code p 1320 refers to ignition signal---circuit malfunction===causes wiring---ignition coil/ module---ignition system---crank position sensor---ECM
the light will remain until it is reset by the scan tool
At this point from your description of cooling down , the fault may be in the ignition module ( over heating from internal problem)
The crank sensor may have a similar problem

Dec 20, 2015 | 2000 Nissan Maxima

2 Answers

Gmc jimmy 2000 will crank but will not start what could be the promblem


does the word security stays flashing after you crank the engine? if it does vehicle has a problem with the passlock 2 system which is a factory installed anti-theft system. when faulty which is too common on those year GM models, vehicle will start and run for 2 or 3 seconds and die out. follow this procedure: 1) locate yellow 20ga. wire running out of steering column which will run along with heavier gauge wires. correct wire will be thin compared to the main ignition wires. 2) cut wire and connect an in line toggle switch and leave in on position. 3) put key in ignition and move forward and leave it that way for approximate 15 min. or until security light goes out. 4) as soon as light goes out vehicle should start. if it does not crank engine again until it starts. 5). when engine starts flip toggle switch to the off position then security light will come on. done. passlock system is bypassed. security light will stay on constant but vehicle will no longer leave you stranded.

Mar 14, 2011 | 2000 GMC Jimmy

2 Answers

I have a 2000 Dodge Dakota Quad cab SLT 4x4 that won't start. The engine will turn over but, as soon as I release the key, it shuts off. The ABS and BRAKE dash lights stay on.


It could be a cam or crank sensor. Have someone plug a OBD II reader in and pull all the codes.
That will give you some idea.
Please let me know what you find.

Feb 10, 2010 | 2000 Dodge Dakota Quad Cab

1 Answer

Service Engine soon light flashing or constant


code 1637 is a generator l circuit code code 300 is a multiple misfire code. from what you are describing i would lean towards wiring problem with alternator circuit.

The L-terminal circuit from the generator is a discrete circuit into the Powertrain Control Module (PCM) . The PCM supplies the ignition voltage to the generator lamp feed. This ignition voltage is pulled low by the generator once the ignition switch supplies ignition 1 voltage . The voltage stays low until the generator turns. When the generator is up and running, the PCM detects ignition voltage. Therefore, with no failures with the vehicles charging system, the lamp terminal circuit will go low 0 volts when the ignition switch is powered up and then goes to the ignition voltage after the engine is started.

I find it hard to believe you need a third alternator. if you do something is going on to burn them up. have them check wires might have a harness rubbed thru grounding out at times

Jan 26, 2009 | 2000 Chevrolet Silverado

3 Answers

Service engine soon light stays on


Many people never think about or ask about their exhaust sytems causing problems..a bad catalytic convertor can cacuse exactly what you're talking about..

A very simple check to see if that's your rpoblem

Dec 19, 2008 | 2000 Buick LeSabre

1 Answer

SERVICE ENGINE SOON LIGHT ON AND STAY ON


My service engine soon light stays on. The vihicle shakes as it idles. It act it wants to shut off. What's the problem

Dec 15, 2008 | 2000 Lincoln Navigator

1 Answer

Service engine soon light on a 2000 cadillac seville


The service engine soon light indicates you have a problem with the engine management system.The only way to get it to stay off is to lacate and repair whatever is not working correctly. Requires very specialized equipment. Take it to your mechanic.

Nov 27, 2008 | 2000 Cadillac Seville

1 Answer

1999 Pontiac Grand Prix lights are staying on


what is the procedure you are using can you explain it to me?
Resetting Procedure

To reset the CHANGE OIL SOON indicator if equipped with the Driver Information Center (DIC).

  1. Turn the ignition to ON without starting the engine.
  2. Fully press and release the accelerator pedal three times within five seconds.
    • If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF then start the vehicle.
    • If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure.
To reset the OIL LIFE indicator if equipped with a Trip Computer.

  1. Press the trip MODE button until the light appears next to OIL LIFE.
  2. Press and hold the trip RESET button until the oil life percentage changes to 100%.
Hope this helps Ill look into the ABS lights but I do believe that you will need a scan tool to retreive a code to be able to diagnose the reason for the lights



Sep 18, 2008 | 1999 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...