Question about 2004 Volkswagen Jetta

1 Answer

If the air pump is not replaced, what does it do to the overall performance?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 986 Answers

First it will not pass the emmision test, you o2 sensor will not read right which will mess up your fuel ecconomy then your cat converter will plug up,so it best to change air pump now instead all the other parts later,and you will be useing more gas,I hope this helps you and thanks

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When should the spark plugs be replaced


It depends on what kind of spark plugs are being replaced, are the old ones platinum plugs? The platinum plugs say every 100,000 miles but I don't wait that long usually. What do the old ones look like? Are you burning excessive oil, or fuel, how is the overall performance of the vehicle. Also why is the reason you're replacing them? Did the check engine light tell you to replace them or did the poor performance of the engine tell you to replace them?

Oct 14, 2015 | 2011 Chevrolet Equinox

2 Answers

1987 subaru 1.8 station wagon heater puts out little to no heat,have put new thermostat in and still no heat


Since it is a 87, you probably need to replace the heater core. If the heat comes up with the higher RPM's of the egnine, maybe a water pump.

Nov 17, 2014 | Subaru Cars & Trucks

1 Answer

Is there a difference between the steering pump reservoir and replacing the steering pump


In nearly every case, the reservoir is part of the overall power steering pump itself. This is the case in your car. Picture below;


12_19_2011_12_34_23_pm.jpg

Dec 13, 2011 | 1999 Plymouth Breeze

3 Answers

The check engine soon light came on at the 146.000.00 mark what do that mean.


when the check engine soon comes on it doesn't point to a specific problem ,it telling you that there is an issue with something that is effecting the overall performance of your truck,without you even noticing any difference in performance. best thing to do is to have a diognostic check done on your truck and that will produce a specific code that will point to the problem an take the guess work out of it .you can even buy a code scanner and do it yourself sometime its a pretty easy fix.

Mar 31, 2011 | 1998 GMC Sierra

1 Answer

I'm making payments on a 2001 kia spectra which sat for a year before i got it. The only thing wrong with it is that the v joints needed to be replaced... or so the previous owner thought since i had it I...


Replace the fuel filter if you have not done that yet. They are not that expensive to have replaced (about $60 for parts and labor) and it can increase engine performance, gas mileage and overall running condition. It would be a good idea to take it back to shop that installed the fuel pump and ask them to check if the fuel pump is properly grounded. If you get chance, can you give a more detailed description of how the car drives? For example, does it run good and low speeds but not at higher speeds, or is it sluggish or idling rough, etc. Thank you

May 10, 2010 | 2001 Kia Spectra

1 Answer

IMRC 1996 Ford Taurus what is it's function?


The Intake Manifold Runner Control Or IMRC's function is to help improve overall engine performance. It does this by providing a second air inlet passage for each cylinder when the engine RPM's reach a given level. I believe it is around 3,000rpm's. Under this point the IMRC a valve closes thus limiting each cylinder to a single air inlet.

Sep 27, 2009 | 1996 Ford Taurus

1 Answer

How much more hp would i get with headers and new system


Headers and a freer flowing exhasut just by itself won't gain you alot of power,maybe 20 horsepower.What is needed is a freer flowing intake and fuel supply along with a better ignition curve to fully take advantage of the freer flowing exhaust.If running fuel injection,you would need a performance chip for the ECU/PCM,to really take advantage of the exhaust system.If running a carburetor,the jets would beed to be increased in size slightly,and a performance curve programmed into the distributor.Think of an engine as a huge iron lung,air in,air out.When you make modifications or improvements to increase the amount of air flow overall,air IN is as important as air OUT.They both need to be adressed is what i'm saying,to take full advantage of any mods.Providing the intake,fuel and ignition are addressed along with the headers and exhaust,expect a good 50 horsepower gain overall (V 8) if not more.Higher gains will require a more radical camshaft,and some driveability will be sacrificed there.

Jul 27, 2008 | Pontiac Trans Cars & Trucks

1 Answer

Chech engin light secondary air pump


The SAI (secondary air pump) comes on for 30-45 seconds when you first start the engine if the coolant is under 85 deg F. It pumps air through the head into the exhaust. It's purpose is to supply extra oxygen to the cats to heat them up quicker and reduce emissions. It should have no real effect on engine performance, but does help bring engine temps up quicker making the engine more efficient.

Jun 27, 2008 | 2000 Audi A6

1 Answer

Vw passat 2000 1.8t front wheel drive


please rate me solved...thanks

DTC P0411/16795: SECONDARY AIR SYSTEM - INCORRECT FLOW DETECTED
Test Requirements
Ensure all fuses are okay, battery voltage is at least 11.5 volts, all electrical accessories are off, A/C is off.
Ensure engine is mechanically sound.
Test Procedure

NOTE
Secondary air system is activated by ECM and blows air into exhaust pipe
upstream of catalytic converter for 100 seconds during a cold start, 41-91°F (5-
33°C). Engine must be cold to perform following test procedure.

1. Ensure fuse and secondary fuse (secondary fuse is 40 amp and is located in fuse holder on top of battery)
are okay. Check hoses and components of Secondary Air Injection System, for damage, loose fit and
improper installation, check vacuum hoses for Secondary Air Injection System. Repair as necessary.
Erase DTC memory. Verify repair. If DTC does not reset, test is complete. Perform ECM relearn
procedure. See TEST DRIVE RELEARN PROCEDURE .
2. Remove engine cover. Disconnect pressure hose from Secondary Air Pump Motor (V101), by pressing
buttons on hose connector. See Fig. 33 . Using scan tool, check Secondary Air Pump Motor (V101) in
scan tool Output Diagnostic Test Mode (Secondary Air Pump Relay activation mode). See OUTPUT
DIAGNOSTIC TEST MODE .
3. Secondary Air Pump Motor (V101) should run in intervals and air should exit pump at hose connection.
If Secondary Air Pump Motor (V101) is okay, go to step 7 . If motor runs and no air exits secondary air
pump motor, replace faulty Secondary Air Pump Motor (V101). Erase DTC memory. Verify repair. Test
is complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE . If
secondary air pump motor does not run, go to next step.
4. Disconnect Secondary Air Pump Motor (V101) harness connector, install LED test light at secondary air
pump harness connector terminals. Turn ignition on. Using scan tool, activate Secondary Air Pump Motor
(V101) in scan tool Output Diagnostic Test Mode (Secondary Air Pump Relay activation mode). See
OUTPUT DIAGNOSTIC TEST MODE . LED test light at Secondary Air Pump Motor (V101) harness
connector should flash. If LED test light at Secondary Air Pump Motor (V101) harness connector does
not flash, go to next step. If LED test light at Secondary Air Pump Motor (V101) harness connector
flashes, replace faulty Secondary Air Pump Motor (V101). Erase DTC memory. Verify repair. Test is
complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE .
5. Using DVOM check resistance of Secondary Air Pump Motor (V101) wiring. See appropriate WIRING
DIAGRAM under ENGINE PERFORMANCE in SYSTEM WIRING DIAGRAMS. Resistance should
be a maximum of 1.5 ohms for each reading. Check wiring for short circuit to one another in Secondary
Air Pump Motor (N101) harness connector. Repair as necessary. Erase DTC memory. Verify repair. Test
is complete. Perform ECM relearn procedure.
Secondary Air Pump Motor (N101) wiring is okay, go to next step.
6. Check Secondary Air Pump Relay (J299) and Secondary Air Pump Relay (J299) wiring. See DTC
P0418/16802: SECONDARY AIR PUMP RELAY (J299), MALFUNCTION . Repair or replace as
necessary. Erase DTC memory. Verify repair. Test is complete. Perform ECM relearn procedure. See
TEST DRIVE RELEARN PROCEDURE .
7. Disconnect vacuum hose from Secondary Air Injection Valve (N112) and disconnect pressure hose from
secondary air pump motor, press buttons on pressure hose connector to disconnect pressure hose. See Fig.
34 . Blow lightly into disconnected pressure hose, Combi-Valve should be closed. Connect hand vacuum
pump to disconnected vacuum hose and apply vacuum to Combi-Valve, Combi-Valve should open. If
Combi-Valve opens when vacuum is applied, Combi-Valve is okay. Go to next step. If Combi-Valve
does not open when vacuum is applied, replace faulty Combi-Valve. Erase DTC memory. Verify repair.
Test is complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE .
8. Check Secondary Air Injection Valve (N112). See DTC P0412/16796: SECONDARY AIR
INJECTION VALVE (N112), ELECTRICAL CIRCUIT MALFUNCTION . Repair as necessary.
Erase DTC memory. Verify repair. Test is complete. Perform ECM relearn procedure.
NOTE: Do not use compressed air to check Combi-Valve.
2000 Volkswagen Passat GLS
2000 ENGINE PERFORMANCE Self-Diagnostics - 1.8L Turbo

Jun 21, 2008 | 2000 Volkswagen Passat 4Motion

Not finding what you are looking for?
2004 Volkswagen Jetta Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...