Question about 2006 Toyota Camry

2 Answers

I arced a wire while changing my alternator on my 06 Camry, now i have no power whatsoever- what fuse or relay is the culprit

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

Look in the fusebox under the hood, at all of the larger 30 amp and up fuses. You probably have a blown 100 amp fuse. If it is blown, note that this fuse is BOLTED in; you cannot remove it without removing the bolts.

Posted on Sep 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 811 Answers

Check main circuit breaker or fuses

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no power to my truck whatsoever. No crank No clicking (acts like it doesn't have a battery in it) No lights inside or out. I have checked fuses inside and out including the starter relay.


What make , model an year vehicle ? May have burnt fusible link .Main relay or a main fuse burnt somewhere . You can find electrical distribution diagrams at www.bbbind.com/ free wiring diagrams .

Jan 02, 2016 | Cars & Trucks

1 Answer

Just got 84 lasharo rv ac blower dont work cant find fuze


If a GM chassis and problem is dash air, remove the power wire from blower (under hood) & apply 12 volts directly in order to confirm blower even works. Next, pull blower relay harness & check for arcing/burnt wires & contacts (usually the culprit this year GM). If good, trace wire to relay and check for 12 volts at relay (be sure to use a test light) and do this across the ground and power wires to relay and, relay to blower. Bad grounds and burnt contacts on relays are more of a problem than fuses during these years.

Oct 26, 2013 | Cars & Trucks

1 Answer

Does anyone know where is the relay for the electric cooling fans on a 06 gmc 4.8


They should be in the power distribution box under the hood there. It's a fuse and relay block, carrying and distributing all the power from the battery and alternator to the whole vehicle. Several relays, some maxi-fuses, and regular fuses are in this box. The cover over it should have a diagram of relay and fuse location. You may have two relays there for the fans.

Jan 05, 2013 | Cars & Trucks

1 Answer

My wires were arcing...so I changed them...but they are still arcing. What now?


Still ?

They were changed for no reason other
than arcing & new ones did the same?

And now your here months later?

Explain that to us!

Never heard of new wires arcing & where
is this arcing taking place?

Nov 15, 2012 | 1998 Toyota Camry

1 Answer

2002 ranger 4x4 does not work. I changed 4x4 motor not geting power to it. Need wiring diagram for 4x4 system


There is power relay in the under hood fuse box on drivers side fender well.Usally this is the culprit.

Jan 14, 2012 | Cars & Trucks

3 Answers

I have a toyota camry 2000 and since I bought it the only horn that would work was the high tone one. All of the sudden none of them are working now. I realized that a relay on the fuse box that is under...


The click you here is the horn relay, You need to find the horns and check for power at the wire connectors. But you probably have a bad low and now a bad high not horn. since the relay clicks your fuse is good so that eliminates the fuse.

Feb 17, 2011 | 2000 Toyota Camry

1 Answer

Power door lock system not working on my Toyota Camry 2001


check fuses if its good see if the fuse has power on both sides with a test light or a volt meter. key has to be on if all thats good i would replace the switch thats usually the culprit it gets pop or something spilled in it if no juice is at fuse look at relay or wiring usaully i do the tests first before i do the wiring last if numbers are the same on the relays u can change it out with a different relay

Jul 02, 2009 | 1999 Toyota 4Runner

1 Answer

I have a 2003 ford focus. Ford staes the


Check your battery ground connections. Make sure the vehicle chassis (and alternator) is properly grounded.
Check for any loose connections around the main high current 12V supply fuses.
Check the clicking in the steering column is not a loose supply wire arcing.

Jun 20, 2009 | 2000 Ford Focus

3 Answers

My 97 Camry has no inside power, no radio, power windows, lights, dash lights, nothing. I changed the ignition switch, and put a new battery in, and there is still no power inside the car. Has anyone else...


There is a fusable link from your battery to everything inside the car. 62468983
See FL Main 3.0W - I believe that is where your problem lies. If all your fuses are good...that is the culprit. Good luck!

62468439

Jun 16, 2009 | 1997 Toyota Camry

1 Answer

1990 camry power window problem


It is rare that the power window relay will fail. Personally, I would look to see if there is power at the master switch on the driver's door. Anywhere. If the is NO POWER, you have a broken wire between the door & the LF kick panel where the wires come thru the body into the door shell. If there is power, the master switch is narmally the culprit

Jul 25, 2008 | 1999 Toyota Camry

Not finding what you are looking for?
2006 Toyota Camry Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...